• Proceedings of the Korea Water Resources Association Conference
• /
• 2017.05a
• /
• pp.110-110
• /
• 2017

하천시설물 설계, 시공 및 관리에 있어서 하상재료는 매우 중요하다. 예를 들어, 재료에따른 호안이나 하안의 보호능력이 떨어지거나 수리적 특성에 의해 쉽게 파손될 수 있으며, 구성물질에 의해 하천환경의 변화를 야기시킬 수 있다. 때문에 본 연구에서는 비독성 자연형 하상재료를 이용하여 홍수시 수리조건을 반영하여 상류에서부터 사류까지 다양한 Froude 수에 따른 저항력에 대한 실험을 진행하였다. 본 연구의 실험진행은 기 개발된 바닥응력을 직접측정하는 장치와 PIV시스템을 이용하여 수리특성을 측정하였다.(Park J.H. et al. 2016, Flow Measurment and instrumentation.) 또한 각각의 조건에 따른 수리학적 특성의 변화를 비교하였다. 하상 재료는 콘크리트를 배제한 자연형 제방이나 하상에 사용되는 재료를 이용하여 비교하였으며 Foude 수는 일반적인 흐름의 상류에서 홍수 시, 고유량에서 발생하는 사류까지 다양한 범위에서 실험을 진행하였으며, 이러한 재료와 Froude 수에 따른 토양 유실에 대한 실험을 진행하였다. 토양 유실율의 측정 장비로는 초음파 변위계를 이용하여 실험 전, 후의 세굴심 변화를 이용하여 토양의 세굴면적을 수치화 시킨 수치로 적용하여 토양 유실율을 산정하였다.

• Korean Chemical Engineering Research
• /
• v.47 no.5
• /
• pp.572-579
• /
• 2009

This study is to investigate experimentally the flame structure and propagation mechanism in dust explosions and to provide the fundamental knowledge. Upward propagating laminar dust flames in a vertical duct of 1.8 m height and 0.15 m square cross-section are observed and flame front is visualized using by a high-speed video camera. Also, the thicknesses of preheated and reaction zone have been determined by a schlieren, electrostatic probe and thermocouple. The thickness of preheated zone in lycopodium dust flame is observed to be 4~13 mm, about several orders of magnitude higher than that of premixed gaseous flames. From the experimental results by a PIV(Particle Image Velocimetry) system, a certain residence time of the unburned particle in preheated zone is needed to generate combustible gas from the particle. The residence time will depend on preheated zone thickness, particle velocity and flame propagation velocity.

• Journal of Ocean Engineering and Technology
• /
• v.29 no.2
• /
• pp.154-162
• /
• 2015

In this study, experimental and numerical methods were applied to observe sloshing impact phenomena. A two-dimensional rectangular tank filled with water and air was considered with a specific excitation condition that induced a hydrodynamic impact without an air pocket at the top corner of the tank. High-speed cameras and a pressure measurement system were synchronized, and a particle image velocimetry (PIV) technique was applied to measure the velocity field and corresponding pressure. The experimental condition was implemented in a numerical computation to solve incompressible two-phase flows using a Cartesian-grid method. The discretized solution was obtained using the finite difference and constraint-interpolation-profile (CIP) methods, which adopt a fractional step scheme for coupling the pressure and velocity. The tangent of the hyperbola for interface capturing (THINC) scheme was used with the weighed line interface calculation (WLIC) method to capture the interface between the air and water. The calculated impact pressures and velocity fields were compared with experimental data, and the relationship between the local velocity and pressure was investigated based on the computational results.

• 한국전산유체공학회:학술대회논문집
• /
• 2008.03b
• /
• pp.6-9
• /
• 2008

Analyzing the characteristics of blood flow in the blood vessels is very important to diagnose the circulatory diseases. In order to investigate the hemodynamic characteristics in vivo, the measurements of blood flows inside the extraembryonic arterial and venous blood vessels of chicken embryos were carried out using an in vivo micro-PIV technique. The circulatory diseases are closely related with the formation of abnormal hemodynamic shear stress regions, thereby it is important to get blood velocity and vessel's morphological information according to the vessel configuration and the flow conditions. In this study, the flow images of RBCs in blood vessels were obtained using a high-speed CMOS camera with a spatial resolution of approximately 14.6${\mu}$m${\times}$14.6${\mu}$m in the whole circulation network of blood vessels. The blood flows in the veins and arteries show steady laminar and unsteady pulsatile flow characteristics, respectively. The mean blood flows merged (in veins) and bifurcated (in arteries) smoothly into the main blood vessel and branches, respectively, without any flow separation or secondary flow which accompanying large variation of shear stress. Vorticity was high in the inner regions for both types of vessels, where the radius of curvature varied greatly. The instantaneous flows in the arterial blood vessels showed noticeable pulsatility due to the heart beat, and the main features of the velocity waveforms, including pulsatile shape, retrograde flow, mean velocity, maximum velocity and pulsatile frequency, were significantly dependent on the pulsatile condition which dominates the arterial blood flow. In near future, these in vivo experimental results of blood flow measured in various extraembryonic blood vessels would be very useful to understand the hemodynamic characteristics of human blood flows and various blood flow researches for clinically useful hemodynamic discoveries as well.

• Journal of Mechanical Science and Technology
• /
• v.20 no.5
• /
• pp.710-716
• /
• 2006

Micro-PIV system with a high speed CCD camera is used to measure the flow field near the advancing meniscus of a water slug in microchannels. Image shifting technique combined with meniscus detecting technique is proposed to measure the relative velocity of the liquid near the meniscus in a moving reference frame. The proposed method is applied to an advancing front of a slug in microchannels with rectangular cross section. In the case of hydrophilic channel, strong flow from the center to the side wall along the meniscus occurs, while in the case of the hydrophobic channel, the fluid flows in the opposite direction. Further, the velocity near the side wall is higher than the center region velocity, exhibiting the characteristics of a strong shear-driven flow. This phenomenon is explained to be due to the existence of small gaps between the slug and the channel wall at each capillary corner so that the gas flows through the gaps inducing high shear on the slug surface. Simulation of the shape of a static droplet inside a cubic cell obtained by using the Surface Evolver program is supportive of the existence of the gap at the rectangular capillary corners. The flow fields in the circular capillary, in which no such gap exists, are also measured. The results show that a similar flow pattern to that of the hydrophilic rectangular capillary (i.e., center-to-wall flow) is always exhibited regardless of the wettability of the channel wall, which is also indicative of the validity of the above-mentioned assertion.

• Proceedings of the KSME Conference
• /
• 2002.08a
• /
• pp.733-736
• /
• 2002

The inside configuration of intake nozzle of vacuum cleaner greatly affects the dust-collection efficiency and acoustic-noise effect generated from flow separation Interaction between high-speed flow and internal structure. In order to improve the performance of the vacuum cleaner, flow fields inside the intake nozzles were investigated using flow visualization and FIV (Particle Image Vetocimetry) technique. The measurement to aerodynamic power, suction efficiency and noise level were also carried out. Valuable information was obtained from the experiments, revealing how to modify the intake nozzle. In this paper, the results of visualization, velocity distribution of flow fields, aerodynamic power, suction efficiency and noise level are discussed.

• Geomechanics and Engineering
• /
• v.35 no.2
• /
• pp.195-208
• /
• 2023

The nodular diaphragm wall (NDW) is a novel type of foundation with favorable engineering characteristics, which has already been utilized in high-rise buildings and high-speed railways. Compared to traditional diaphragm walls, the NDW offers significantly improved vertical bearing capacity due to the presence of nodular parts while reducing construction time and excavation work. Despite its potential, research on the vertical bearing characteristics of NDW requires further study, and the investigation and visualization of its displacement pattern and failure mode are scant. Meanwhile, the measurement of the force component acting on the nodular parts remains challenging. In this paper, the vertical bearing characteristics of NDW are studied in detail through the indoor model test, and the displacement and failure mode of the foundation is analyzed using particle image velocimetry (PIV) technology. The principles and methods for monitoring the force acting on the nodular parts are described in detail. The research results show that the nodular part plays an essential role in the bearing capacity of the NDW, and its maximum load-bearing ratio can reach 30.92%. The existence of the bottom nodular part contributes more to the bearing capacity of the foundation compared to the middle nodular part, and the use of both middle and bottom nodular parts increases the bearing capacity of the foundation by about 9~12% compared to a single nodular part of the NDW. The increase in the number of nodular parts cannot produce a simple superposition effect on the resistance born by the nodular parts since the nodular parts have an insignificant influence on the exertion and distribution of the skin friction of NDW. The existence of the nodular part changes the displacement field of the soil around NDW and increases the displacement influence range of the foundation to a certain extent. For NDWs with three different nodal arrangements, the failure modes of the foundations appear to be local shear failures. Overall, this study provides valuable insights into the performance and behavior of NDWs, which will aid in their effective utilization and further research in the field.

• Journal of the Korean Society of Propulsion Engineers
• /
• v.17 no.5
• /
• pp.121-131
• /
• 2013

The characteristics of flame dynamics occurring near the bluff body was experimentally investigated in a model combustor with V-gutter bluff body. Measurements of chemiluminescence with high speed camera and PIV were performed for visualization of flame structure. Flashback occurs due to the change of pressure gradient in the combustor, and the flashback distance depends on equivalent ratio. Unstable flames can be classified into three types depending on the flashback distance and structure. When the flame goes over the bluff body, an unusual flame structure occurs at the front of the bluff body. Re-stabilization takes place as the flame moves downstream of the combustor. This process is supported by a strong vortex structure behind the bluff body.

• Proceedings of the Korea Water Resources Association Conference
• /
• 2018.05a
• /
• pp.79-79
• /
• 2018

하천시설물 설계, 시공 및 관리에 재료에 따른 호안이나 제방의 보호능력이 저하되어 설계 시 예상하지 못한 조건에서 쉽게 파손될 수 있으며, 하천환경의 변화를 야기시킬 수 있다. 제방 표면재료는 제외 비탈면의 침식 방지를 목적으로 사용되는 재료로 주로 호안블록. 식생 매트, 사석, 돌망태, 식생등이 주로 사용되며 국내에서는 2000년대 이전에는 자연 흙사면의 식생, 돌망태, 단순 돌기형 콘크리트 블록 등이 주로 사용되었으며 2000년대 이후에는 하천환경을 고려하여 식생의 생장이 가능한 친환경 호안 블록 및 식생 매트의 적용이 일반적인 실정이다. 제방의 수리적 설계를 위해서는 표면 재료의 수리 특성, 즉, 조도계수 및 한계 유속, 한계 소류력이 제시되어야 하는데 이는 실험을 통해서 결정되어야 한다. 때문에 본 연구에서는 자연형 하상재료를 이용하여 바이오 폴리머 첨가시 증가하는 방어능력에 대한 향상도를 평가하는 실험적 평가 방법을 제안하기위해 홍수시 수리조건을 반영하여 상류에서부터 사류까지 다양한 유속범위에 따른 세굴 및 침식에 대한 실험을 진행하였다. 본 연구에서는 실험연구를 통해 연구에 사용된 재료 외 추가적인 재료에 대해서도 평가방법이 적용될 수 있도록 제방 재료의 안정성 평가시스템을 개발하였고, 안정성 평가를 위한 실험진행은 기 개발된 바닥응력을 직접측정하는 장치와 PIV시스템을 이용하여 수리특성을 측정하였다.(Park J.H. et al. 2016, Flow Measurment and instrumentation.) 이러한 측정 장치를 이용하여 바이오폴리머의 첨가에 유무에 따라 세굴에 대한 방어능력의 향상정도를 측정하고자 세굴 및 침식에 대한 평가 방법을 제시하고 있다.

• Journal of Advanced Marine Engineering and Technology
• /
• v.38 no.10
• /
• pp.1275-1280
• /
• 2014

In this study, the performance of a real-time micro telescopic monitoring system is evaluated, in which an artificial neural network is adopted for the diagnoses of vibratory bodies, such as solid piping system or machinery. The structural vibration was measured by a non-contact remote sensing method, in which images of a high-speed high-definition camera were used. The structural vibration data that can be obtained by the PIV (particle image velocimetry) technique were used for training the neural network. The structures of the neural network are dynamically changed and their performances are evaluated for the constructed diagnosis system. Optimized structures of the neural network are proposed for real-time diagnosis for the piping system. It was experimentally verified that the performances of the neural network used for real-time monitoring are influenced by the types of the vibration data, such as minimum, maximum and average values of the vibration data. It concludes that the time-mean values are most appropriate for monitoring the piping system.