• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 1996.11a
• /
• pp.621-625
• /
• 1996

The feed system of the machine tools is limited by the mechanical transmission elements. However, thanks to the advanced modern technology, those machines are able to equip with linear motors. In this paper, the types and application aspects of linear motor are discussed and a synchronous type of the linear motors has been applied to X-Y table for machining center. The performance shows an outstanding result in terms of the accuracy, speed and stiffness. Machine tool system with linear motors is expected to be more productive machines using linear motor in the near next years.

• Journal of the Korean Society for Precision Engineering
• /
• v.14 no.3
• /
• pp.66-74
• /
• 1997

In a high speed and high precision vertical machining center, chatter vibration is easily generated due to unbalanced masses in rotating parts and changtes of cutting forces. In this paper, modal test is performed to obtain modal parameters of the vertical machining center. In order to predit the cutting force of endmilling process for various cutting conditions, a mathematical model is given and this model is based on chip load, cutting geometry, and relationship between cutting forces and the chip load. Specific cutting constants of the model are obtained by averaging forces of cutting tests. The interactions between the dy- namic characteristics and cutting dynamics of the vertical machining center make the primary and the secondary feedback loops, and we make use of the equations of system to predict the chatter vibration. The chatter prediction is formulated as linear differential-differene equations, and simulated for several cases. Trends of vibration as radial and axial depths of cut are changed are shown and compared.

• Transactions of the Korean Society of Machine Tool Engineers
• /
• v.12 no.3
• /
• pp.17-24
• /
• 2003

One of the most important performance criteria related to the gain tuning of controller for CNC machining center is the contour error. This study analyzed circular error by the axis-matched and mismatched cases. To reduce ellipse and radius error, it is necessary to set the gain for each axis to be same bandwidth and high response. Based on the analysis in the frequency domain, we simulate feed system by mathematical model and then predict bandwidth of each axis. For analysis of structure vibration while the each axis is moving, we try the various of measuring method and position loop is improved by jerk limit.

• Proceedings of the Korean Society of Machine Tool Engineers Conference
• /
• 2004.10a
• /
• pp.315-320
• /
• 2004

Cutting fluid usually has been used in order to improve machinability, tool life, surface quality. However, problems such as pollution, costs of chip and fluid treatment caused. In this paper, compressed chilly air was used to machine aircraft parts and investigate possibility and advantage of that. The experiments were carried out in various cutting environments, such as wet and compressed chilly air. With respect to the cutting environment, compressed chilly air gave advantages such as decrease of pollution and easy chip treatment.

• Journal of the Korean Society of Manufacturing Process Engineers
• /
• v.4 no.1
• /
• pp.18-23
• /
• 2005

This paper reports experimental results on microdrilling process for silicon parts used in semiconductor equipments. An experimental system was developed consisting of a high speed precision machine, microscope system, and project profile instrument. The experimental results indicate that the amount of chipping at the entrance and exit of micro hole decreases as the spindle speed increases up to 18,000 rpm. At higher spindle speed, however, the amount of chipping increases rapidly. The amount of chipping and infeed rate show proportional relationship up to 20 m/min of infeed rate. Beyond that infeed rate, however, sudden increase in the amount of chipping has occurred.

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 1997.10a
• /
• pp.420-424
• /
• 1997

n the ballscrew slide system the ~najor problems in accomplishing the high-speed and high-precision are the friction between elements and the decrease of axial stiffness. Especially the friction on the guide have a bad effect on the precision of slidlng. Furthermore stick-slip occur when the low stiffness of slide system. The sticli-slip have a bad influence on the precision. In this research, the affection of stick-slip friction to the precision of the slide system is studied and the possible solution of the precision is proixjsed.

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 2009.06a
• /
• pp.1059-1060
• /
• 2009

• Proceedings of the Korean Society of Machine Tool Engineers Conference
• /
• 2002.10a
• /
• pp.446-449
• /
• 2002

Recently, advanced manufacturing system with high speed and intelligent have been developed for the betterment of machining ability. In this case, reliability prediction work with motion characteristic evaluation of sliding cover has also important roll from design procedure to manufacturing and assembly process. Accordingly in this study, H/W test -bed system for reliability evaluation of sliding cover has been developed to obtain proper reference data for design of new model, and also prevention trouble, quality and life cycle improvement extremely for advanced mother machinary.

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 2000.11a
• /
• pp.1014-1017
• /
• 2000

Reliability engineering is regarded as the major and important roll for all industry. And advanced manufacturing systems with high speed and intelligent have been developed for the betterment of machining ability. In this study, we have systemized evaluation of reliability for machinery system. We proposed the reliability assessment and design review method using analyzing critical units of high speed and intelligent machine system. In addition, we have not only designed and developed test bed system for acquiring reliability data, but also have constructing WEB system for suppling reliability which is provided in design phase. From this study, we will expect to guide and introduce the reliability engineering in developing and processing phase of high quality product.

• Journal of the Korean Society of Manufacturing Process Engineers
• /
• v.2 no.2
• /
• pp.5-13
• /
• 2003

In this study, experiments of high speed grinding had been earned out in a STD11 specimen for evaluating the grindability with designed CBN grinding wheels Ground surfaces were analyzed and evaluated by means of surface Integrities and wheel damages. The surface roughness and 3 dimensional profile had been used for analyzing the micro-surface integrity. The residual stress of the ground surface had been measured by the x-ray diffraction method. Also, the surface state of the ground specimens and the grinding wheels were evaluated by a metallurgical microscope and SEM system after high speed grinding in order to choose the suitable machining conditions.