• Journal of rehabilitation welfare engineering & assistive technology
• /
• v.12 no.1
• /
• pp.46-52
• /
• 2018

The purpose of this study was to investigate the factors affecting falls in 107 elderly living in the city aged 65 or older by evaluating general characteristics, chronic disease status, medical variables related to falls, balance-related confidence, physical ability and depression. Also, the correlations between the significant differences in variables were identified, and the prediction power was determined by deriving the variables with high influence to induce the fall. In the faller group, urinary incontinence, foot pain, lower extremity weakness, number of chronic disease and medication use were significantly higher than those of the nonfaller group. Also, statistically significant differences were evaluated in ABC (Activities-specific Balance Confidence) score, BBS (Berg Balance Scale) score, SGDS (Short Geriatric Depression Scale), FRT (Functional Reach Test) value. The main correlated factor for fall was ABC score, the lower the ABC score, fall risk is increased which is a significant negative impact. When the evaluation is performed by combining those scales, the hit ratio to classify whether faller or nonfaller is increased to 70.01% which is quite higher value.

• Asian-Australasian Journal of Animal Sciences
• /
• v.15 no.9
• /
• pp.1250-1256
• /
• 2002

A novel fine-mapping method exploiting linkage disequilibrium (LD) was applied to better refine the quantitative trait loci (QTL) positions for milk production traits on bovine chromosome 14 in the pedigree comprising 22 paternal half-sib families of a Black-and-White Holstein-Friesian grand-daughter design in the Netherlands for a total of 1,034 sons. The chromosome map was constructed with the 31 genetic markers spanning 90 Kosambi cM with the average inter-marker distance of 3.5 cM. The linkage analyses, in which the effects of sire QTL alleles were assumed random and the random factor of the QTL allelic effects was incorporated into the Animal Model, found the QTL for milk, fat, and protein yield and fat and protein % with the Lod scores of 10.9, 2.3, 6.0, 25.4 and 3.2, respectively. The joint analyses including LD information by use of multi-marker haplotypes highly increased the evidence of the QTL (Lod scores were 25.1, 20.9, 11.0, 85.7 and 17.4 for the corresponding traits, respectively). The joint analyses including DGAT markers in the defined haplotypes again increased the QTL evidence and the most likely QTL positions for the five traits coincided with the position of the DGAT gene, supporting the hypothesis of the direct causal involvement of the DGAT gene. This study strongly indicates that the exploitation of LD information will allow additional gains of power and precision in finding and localising QTL of interest in livestock species, on the condition of high marker density around the QTL region.

• Earthquakes and Structures
• /
• v.15 no.4
• /
• pp.369-382
• /
• 2018

A free vibration analysis and wave propagation of functionally graded porous beams has been presented in this work using a high order hyperbolic shear deformation theory. Unlike other conventional shear deformation theories, a new displacement field that introduces indeterminate integral variables has been used to minimize the number of unknowns. The constituent materials of the beam are assumed gradually variable along the direction of height according to a simple power law distribution in terms of the volume fractions of the constituents. The variation of the pores in the direction of the thickness influences the mechanical properties. It is therefore necessary to predict the effect of porosity on vibratory behavior and wave velocity of FG beams in this study. A new function of the porosity factor has been developed. Hamilton's principle is used for the development of wave propagation equations in the functionally graded beam. The analytical dispersion relationship of the FG beam is obtained by solving an eigenvalue problem. Illustrative numerical examples are given to show the effects of volume fraction distributions, beam height, wave number, and porosity on free vibration and wave propagation in a functionally graded beam.

• Asian-Australasian Journal of Animal Sciences
• /
• v.21 no.1
• /
• pp.11-18
• /
• 2008

We created a cDNA microarray representing approximately 3,500 pig genes for functional genomic studies. The array elements were selected from 6,494 cDNA clones identified in a large-scale expressed sequence tag (EST) project. These cDNA clones came from normalized and subtracted porcine adipose tissue cDNA libraries. Sequence similarity searches of the 3,426 ESTs represented on the array using BLASTN identified 2,790 (81.4%) as putative human orthologs, with the remainder consisting of "novel" genes or highly divergent orthologs. We used the gene microarray to profile transcripts expressed by adipose tissue of fatty Chinese Xiang pig (XP) and muscley Large White (LW). Microarray analysis of RNA extracted from adipose tissue of fatty XP and muscley LW identified 81 genes that were differently expressed two fold or more. Transcriptional differences of four of these genes, adipocyte fatty acid binding protein (aP2), stearyl-CoA desaturase (SCD), sterol regulatory element binding transcription factor 1 (SREBF1) and lipoprotein lipase (LPL) were confirmed using SYBR Green quantitative RT-PCR technology. Our results showed that high expression of SCD and SREBF1 may be one of the reasons that larger fat deposits are observed in the XP. In addition, our findings also illustrate the potential power of microarrays for understanding the molecular mechanisms of porcine development, disease resistance, nutrition, fertility and production traits.

• Journal of Acupuncture Research
• /
• v.20 no.1
• /
• pp.144-158
• /
• 2003

This study was carried out to investigate what kinds of statistical techniques have been used to analyze data from oriental medicine research, For study, 551 original articles which used statistical techniques in their data analysis were selected form the articles published in The journal of Korean Acupuncture & Moxibustion Society(JKAMS) between 1984 to 2002. among them, 122 articles used descriptive statistics while 429 articles used inferential statistics for data analysis. For that 429 articles, t-test (189 articles), analysis fo variance (111 articles), chi-square test (14 articles), correlation (10 articles), regression analysis (4 articles), factor analysis(5 articles), or nonparametric test (23 articles) were chose to analyze the data. Nonparametric approach has substantial power in case data do not meet the assumption of normality. This method is not only easy to use ut also provides measures of the statistical variation of nominal and ordinal scale. This study shows that more and more recent papers use nonparametric test compared to the old articles. nine different statistical software or packages (SAS, SPSS, Statview, Minitab, Sigma plot, ISP, Graphpad prism, Excel, Access) have been used in the articles published JKMAS. High level statistical techniques such as SAS, SPSS, and Statview are user friendly and used most for acupuncture and Moxibustion research. Including tables and plots in an article facilitates understanding family process data from a descriptive standpoint, minimized erroneous statistical conclusions, and clarifies theoretically important relationships among variables. Table and plots have been used 500 and 233 articles, respectively. A computer procedure is proposed and illustrated with statistical packages using SAS, SPSS, Statview and ISP.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2014.02a
• /
• pp.257.1-257.1
• /
• 2014

We investigated characteristics of ITO/Ag-Pd-Cu (APC)/ITO multilayer electrodes prepared by direct current magnetron sputtering for use as an anode in organic solar cells (OSCs). To optimize electrical properties of ITO/APC/ITO multilayer, we fabricated the ITO/APC/ITO multilayer at a fixed ITO thickness of 30 nm as a function of APC thickness. Compare to the surface of Ag layer on ITO, the APC had a smooth surface morphology. At optimized APC thickness of 12 nm, the ITO/APC/ITO multilayer exhibited a sheet resistance of $6{\Omega}/square$ and optical transmittance of 84.15% at a wavelength of 550 nm which is comparable to conventional ITO/Ag/ITO multilayer. However, the APC-based ITO multilayer showed a higher average transmittance in a visible region than the Ag-based ITO multilayer. The higher average transmittance of ITO/APC/ITO multilayer indicated the multilayer is suitable anode for organic solar cells with P3HT:PCBM active layer. OSCs fabricated on the optimized ITO/ACP/ITO multilayer exhibited a better performance with a fill factor of 64.815%, a short circuit current of $8.107mA/cm^2$, an open circuit voltage of 0.59 V, and power conversion efficiency (3.101%) than OSC with ITO/Ag/ITO multilayer (2.8%).

• The Korean Journal of Financial Management
• /
• v.1 no.1
• /
• pp.119-131
• /
• 1985

Although Korea is short of capital technology, and natural resources, she has achieved an outstanding progress by the export-drive policies by Korean government and the creative endeavor of Korean firms. As a result of that, Korean economy and enterprises are in the same file of newly industrialized countries and Korea is ready for an economic take-off as a developed country. But in the early 1980s, each country strengthens protective trade theory and resources nationalism, and this has a great influence on the field of international trade environment. In spite of that, to continue the same high development as that of the past. Korea must try to secure and find export markets, solve trade barriers, make sure of the long-term security of resources, develop technology, and strengthen economic cooperations. To satisfy these desires by 2000s, we must try to make Korean enterprises have the global competitive power and them grow strongly among world wide firm through capital and technology accumulated during the passed years, and to do so, there must be a foreign production and marketing management, too, this can be achieved only through foreign overseas direct investment. This investment has various forms, to say, verifical integrated, horizontal integrated. conglomerate integrated forms, and the amount of investment in each country from 18 century to today reaches 500 billion dollars. This investment is done by strategic, behavioral economic, and financial motives. So I am going to approach the fields of like these; in spite of the differences among political, economical, caltural, and social systems, and many risk compared with domestic enterprises, why do Korean firms witsh to transfer the productive facilities to overseas countries and run them there? What is the comparative advantage of foreign direct investment compared with domestic investment ?. why is the factor of comparative advantage transferred through foreign direct investment?, what is the motive of foreign overseas direct investment?, and last the ownership-specific factors and the theory of internalization, and the location specific factors were analysed chiefly. But in consideration of the given condition in Korea, Korean overseas direct investment must be propelled rationally on the basis of the above mentioned theory.

• Journal of the Korean Society of Fisheries and Ocean Technology
• /
• v.53 no.4
• /
• pp.446-455
• /
• 2017

The improvement of resistance performance for the 4.99 ton class fishing boats was shown. The 4.99 ton fishing boats are the most commonly used one in the Korean coastal region. The evaluation of resistance performance was estimated by the Computational Fluid Dynamics (CFD) analysis. The CFD simulation was performed by the validation for various types of bow shapes on the hull. The optimized hull form from the simulation was selected and showed the best resistance performance. This hull type was tested on the towing tank in the National Institute of Fisheries Science (NIFS). The effective horsepower (EHP) was estimated by the resistance test on the towing tank with the bare hull condition. The drag force on the three service speed conditions was obtained for the resistance analysis to power prediction. The measured drag forces are compared with the results from the CFD simulation with one another. As results of the model tests, it was confirmed that the shape of the bow is an important factor in the resistance performance. The effective horsepower decreased about 30% in comparison with the conventional hull form. Also, the resistance performance improved the reduction of required horsepower, which especially contributed to the energy-saving for the fisheries industry. In the CFD analysis, the resistance performance improved slightly. In this case, the ratio of the residual resistance ($C_R$) in the total resistance ($C_T$) was high. Therefore, the CFD analysis was not enough to satisfy with reflection for the free surface and wave form in the CFD procedure. Both model test and CFD calculation in this study can be applied to the initial design process for the coastal fishing vessel.

• Journal of Preventive Medicine and Public Health
• /
• v.43 no.5
• /
• pp.411-422
• /
• 2010

Objectives: This study aims to investigate the factors related to Korean physicians' trust in the government. Methods: We used structured questionnaires that were composed of multidimensional scales for each of the various categories. Results: The recognition levels of trust of the government by Korean physicians were not high, and they ranged from 3.6 to 4.8 for ten scales. The factors related to trust in the government were categorized into seven factors on the basis of a factor analysis. On the regression analysis, a positive relationship was found between "the individual propensity to trust" and trust in the government, while a negative relationship was found between "the recognition level regarding the government as an authoritarian power" and trust in the government. "Confidence about participation in the policy process" as internal efficacy and "belief in governmental ability and motivation toward public demand" as external efficacy also showed a strong positive relationship with trust in the government. Conclusions: From these results, we can draw the conclusion that making efforts to improve the recognition level of trust in the government among physicians is an important policy task. To increase the trust level, participation of physicians in the policy process in various ways and open communication between the physicians' associations and the government should be facilitated.

• Journal of Welding and Joining
• /
• v.33 no.1
• /
• pp.35-40
• /
• 2015

Recently, there have been the increase of ship size and the development of oil and gas in arctic region. These trends have led to the requirements such as high strength, good toughness at low temperature and good weldability for prevent of brittle fracture at service temperature. There has been the key issue of crack arrestability in large size structure such as container ship. In this report for the first time, crack arrest toughness of thick steel plate welds was evaluated by large scale ESSO test for estimate of brittle crack arrestability in thick steel plate. For large structures using thick steel plates, fracture toughness of welded joint is an important factor to obtain structural integrity. In general, there are two kinds of design concepts based on fracture toughness: crack initiation and crack arrest. So far, when steel structures such as buildings, bridges and ships were manufactured using thick steel plates (max. 80~100mm in thickness), they had to be designed in order to avoid crack initiation, especially in welded joint. However, crack arrest design has been considered as a second line of defense and applied to limited industries like pipelines and nuclear power plants. Although welded joint is the weakest part to brittle fracture, there are few results to investigate crack arrest toughness of welded joint. In this study, brittle crack arrest designs were developed for hatch side coaming of large container ships using arrest weld, hole, and insert technology.