• 제목/요약/키워드: High-Frequency isolated

검색결과 241건 처리시간 0.03초

On Wavelet Transform Based Feature Extraction for Speech Recognition Application

  • Kim, Jae-Gil
    • The Journal of the Acoustical Society of Korea
    • /
    • 제17권2E호
    • /
    • pp.31-37
    • /
    • 1998
  • This paper proposes a feature extraction method using wavelet transform for speech recognition. Speech recognition system generally carries out the recognition task based on speech features which are usually obtained via time-frequency representations such as Short-Time Fourier Transform (STFT) and Linear Predictive Coding(LPC). In some respects these methods may not be suitable for representing highly complex speech characteristics. They map the speech features with same may not frequency resolutions at all frequencies. Wavelet transform overcomes some of these limitations. Wavelet transform captures signal with fine time resolutions at high frequencies and fine frequency resolutions at low frequencies, which may present a significant advantage when analyzing highly localized speech events. Based on this motivation, this paper investigates the effectiveness of wavelet transform for feature extraction of wavelet transform for feature extraction focused on enhancing speech recognition. The proposed method is implemented using Sampled Continuous Wavelet Transform (SCWT) and its performance is tested on a speaker-independent isolated word recognizer that discerns 50 Korean words. In particular, the effect of mother wavelet employed and number of voices per octave on the performance of proposed method is investigated. Also the influence on the size of mother wavelet on the performance of proposed method is discussed. Throughout the experiments, the performance of proposed method is discussed. Throughout the experiments, the performance of proposed method is compared with the most prevalent conventional method, MFCC (Mel0frequency Cepstral Coefficient). The experiments show that the recognition performance of the proposed method is better than that of MFCC. But the improvement is marginal while, due to the dimensionality increase, the computational loads of proposed method is substantially greater than that of MFCC.

  • PDF

Study on Satellite Vibration Control Using Adaptive Algorithm

  • Oh, Choong-Seok;Oh, Se-Boung;Bang, Hyo-Choong
    • 제어로봇시스템학회:학술대회논문집
    • /
    • 제어로봇시스템학회 2005년도 ICCAS
    • /
    • pp.2120-2125
    • /
    • 2005
  • The principal idea of vibration isolation is to filter out the response of the system over the corner frequency. The isolation objectives are to transmit the attitude control torque within the bandwidth of the attitude control system and to filter all the high frequency components coming from vibration equipment above the bandwidth. However, when a reaction wheels or control momentum gyros control spacecraft attitude, vibration inevitably occurs and degrades the performance of sensitive devices. Therefore, vibration should be controlled or isolated for missions such as Earth observing, broadcasting and telecommunication between antenna and ground stations. For space applications, technicians designing controller have to consider a periodic vibration and disturbance to ensure system performance and robustness completing various missions. In general, past research isolating vibration commonly used 6 degree order freedom isolators such as Stewart and Mallock platforms. In this study, the vibration isolation device has 3 degree order freedom, one translational and two rotational motions. The origin of the coordinate is located at the center-of-gravity of the upper plane. In this paper, adaptive notch filter finds the disturbance frequency and the reference signal in filtered-x least mean square is generated by the notch frequency. The design parameters of the notch filter are updated continuously using recursive least square algorithm. Therefore, the adaptive filtered-x least mean square algorithm is applied to the vibration suppressing experiment without reference sensor. This paper shows the experimental results of an active vibration control using an adaptive filtered-x least mean squares algorithm.

  • PDF

골프장 잔디에 병을 일으키는 Rhizocatonia의 동정 및 병원성 (Identification and Pathogenicity of Rhizoctonia spp. isolated from Turfgrasses in Golf Courses in Korea)

  • 심구열;이희구
    • 아시안잔디학회지
    • /
    • 제9권3호
    • /
    • pp.235-252
    • /
    • 1995
  • Turfgrass Rhizoctonia blight is a severe disease in golf courses in Korea. Attempts were made in 1989 to 1994 to identify the Rhizoctonia species associated with turfgrass blights and also to examine their epidemiology. A total of 120 Rhizoctonia isolates collected were identified as R. solani AG1, R. solani AG2-2, R. cerealis(AG-D) and R. oryzas from brown patch, large patch, yellow patch and white patch, re-spectively. R. solani AG1 was mostly associated with brown patch of cool-season grasses. and most frequently isolated in June through July and also in September. R. solani AG2-2 was isolated exclusively from zoysiagrasses from April to November, most frequently in June through July and October through November. R. cerealis was isolated frequently from both creeping hentgrass in March through April and in November, and zoysiagrass in April and July. Thermophilic R. oryzae was isolated only from creeping bentgrass in August, although with very low frequency. R. solani AG2-2 was strongly pathogenic specifically to Korean lawngrasses(Zoysia japonica, Z.matrella, Z. tenuifolia), but non-pathogenic to creeping bentgrass(Agrostis palustris), bermudagrass (Cynodon dactylon), Kentucky bluegrass(Poa pratensis), perennial ryegrass(Lolium prenne), and creeping red fescue(Festuca rubra subsp. ruhra L.). R. cerealis was strongly pathogenic to zoysiagrass and bentgrass only, but was isolate-specific i.e., from non-pathogenic to pathogenic, for other turfgrasses. The mycelial growth was optimum at relatively high temperature ranges of 25~30$^{\circ}C$ for R.solani AG1, AG2-2 and R. oryzae, while the mycelial growth of R. cerealis was initiated at $^{\circ}C$ and almost ceased at or above $^{\circ}C$.

  • PDF

Vibration characteristics change of a base-isolated building with semi-active dampers before, during, and after the 2011 Great East Japan earthquake

  • Dan, Maki;Ishizawa, Yuji;Tanaka, Sho;Nakahara, Shuchi;Wakayama, Shizuka;Kohiyama, Masayuki
    • Earthquakes and Structures
    • /
    • 제8권4호
    • /
    • pp.889-913
    • /
    • 2015
  • Structural vibration characteristics of a semi-active base-isolated building were investigated using seismic observation records including those of the 2011 Great East Japan earthquake (Tohoku earthquake). Three different types of analyses were conducted. First, we investigated the long-term changes in the natural frequencies and damping factors by using an ARX model and confirmed that the natural frequency of the superstructure decreased slightly after the main shock of the Tohoku earthquake. Second, we investigated short-term changes in the natural frequencies and damping factors during the main shock by using the N4SID method and observed different transition characteristics between the first and second modes. In the second mode, in which the superstructure response is most significant, the natural frequency changed depending on the response amplitude. In addition, at the beginning of the ground motion, the identified first natural frequency was high possibly as a result of sliding friction. Third, we compared the natural frequencies and damping factors between the conditions of a properly functional semi-active control system and a nonfunctional system, by using the records of the aftershocks of the Tohoku earthquake. However, we could not detect major differences because the response was probably influenced by sliding friction, which had a more significant effect on damping characteristics than did the semi-active dampers.

김치에 서식하는 Gram 양성세균의 분리 및 동정의 재평가 (Reevaluation of Isolation and Identification of Gram-positive Bacteria in Kimchi)

  • 임종락;박현근;한홍의
    • 미생물학회지
    • /
    • 제27권4호
    • /
    • pp.404-414
    • /
    • 1989
  • 김치발효 중 Gram 양성세균 또는 유산균의 분리와 동정을 시도하였다. 종의 다양성은 분리배지와 온도에 영양을 받았고, 다양성은 온도가 낮아질수록 감소하는 경향이었다. MRS는 세균의 분리에 KM(김치재료로 만든 자연배지)은 종의 수를 파악 하는데 각각 적합하였다. 분리균의 동정은 Bergey's manual of Systematic Bacterio]ogy (1986)를 기초로 하여 작성한 이 분농생표(dichotomous Identification scheme)에 의하여 선행하였다. 각 온도(5, 15, $25^{\circ}C$)에서 동정된 Gram 양성세균은 Leuconostoc 5종, Streptococcus 4종, Pediococcus 3종, Bacillus 2종 그리고 Ltobacillms 18종이였다. 각 온도에서 출현 빈도가 높은 종은 $25^{\circ}C$에서 LactobaIlus ptantanmz, Streptococcµs faffinolactis, Leuconostoc maιnteroid, subsp mlsentιroides 이었고, $15^{\circ}C$에서 L. mesenteroides Lactobacillus fructosus, L. maen teroid,l.I subsp. mesent,roid, 이였고, $5^{\circ}C$ 에서 Leuconostoc sp.(65.2 빈도)에 의하여 이루어졌다. 그리고 각 온도에 따른 김치발효 중 지금까지 알려진 Pediococcus cerevisiae 와 Streptococcus faecalis는 분리되지 않았다.

  • PDF

Cellulomonas속 원형질체 재생과 종간 융합조건 (Protoplast Regeneration and Interspecific Fusion of the Genus Cellulomonas)

  • 배무;조보연
    • 한국미생물·생명공학회지
    • /
    • 제16권4호
    • /
    • pp.303-309
    • /
    • 1988
  • Cellulose를 이용할 수 있는 Cellulomonas속 균주의 종간 세포의 융합방법을 확립하기 위해 원형질체 재생 및 융합조건에 대해 검토하였다. Cellulomonas속 균주의 원형질체는 osmotic stabilizer를 포함하는 재생배지에서 유동성 한천배지로 중층하여 재생시켰고 재생 확인은 주사전자현미경으로 하였다. 원형질체 융합은 항생물질 내성과 영양요구성 돌연변이주의 유전자 표지에 확인하였다. Lysozyme을 처리하여 형성된 C. flavigena 원형 질체의 세포벽 재생은 osmotic stabilizer로 0.4M sorbitol을 포함하는 재생배지에서 약 15% 수준이었으며 여기에 Polyvinyl Pyrrolidone(PVP) 3% 첨가로 재생율을 약 3배정도 증가시킬 수 있었다. Cellulomonas속 균주의 변이주간의 원형질체 융합은 융합유도제로 PEG 6000을 취하여 최적농도 40% (w/v), 치적 처리시간 15분, Ca농도 25mM에서 약 2.0$\times$$10^{-4}$ - 4.0$\times$$10^{-4}$의 융합빈도를 얻을 수 있었다.

  • PDF

필드 밀을 이용한 대지전장 측정장치 개발 (Development of Measuring Device for Electric Field on the Ground Level Using a Field Mill)

  • 송재용;김명진;길경석;천상규
    • 한국정보통신학회:학술대회논문집
    • /
    • 한국해양정보통신학회 2001년도 춘계종합학술대회
    • /
    • pp.469-473
    • /
    • 2001
  • This paper describes a rotation-type field mill to measure the electric field intensity caused by thunderclouds on the ground level. The field mill developed is consisted of two isolated electrode vanes, a grounded stator and a rotor. To develop a high sensitive field mill, the principles and design rules of a rotation-type field mill are studied. Also, two types of calibration system, such as a cylindrical guard electrodes and a parallel-plate electrodes, are proposed to determine the sensitivity and frequency bandwidth of the field mill. From the calibration experiment, the frequency bandwidth and the sensitivity of the field mill arc DC ∼ 200 [MHz] and 0.267 [mV/Vm], respectively. Therefore, it can measure the electric field intensity from 73[V/m] to 18.7[kV/m].

  • PDF

Genetic Structure in Korean Populations of Hosta capitata (Liliaceae)

  • Chung, Myong-Gi
    • Journal of Plant Biology
    • /
    • 제37권3호
    • /
    • pp.277-284
    • /
    • 1994
  • I investigated levels of genetic diversity, population genetic structure, and gene flow in Hostacapitata, a herbaceous perennial native to South Korea and southwestern Japan. Starch gel electrophoresis was conducted on leaves collected from 310 plants in 19 Korean populations. Twenty-two of 25 putative loci examined were polymorphic in at least one populatin and the mean number of alleles per locus was 1.65. In addition, mean expected heterozygosity within populations (Hep=0.153) was higher than average values for species with similar life history traits. Significant differences in allele frequency were detected between populations at all loci (P<0.01), and slightly over 30% of the genetic variation was found among populatins (GST=0.308). Indirect estimates of the number of migrants per generation (Nm) (0.506, calculated from GST; 0.852, calculated from the mean frequency of ten private alleles) indicate that gene flow is restricted among the isolated Korean populations of H. capitata. Factors contributing to the high levels of genetic differentiation among populations of H. capitata include small and discrete populations, human disturbance, and low frequencies of pollinator foraging behavior.

  • PDF

주변압기를 소음원으로한 전동차 실내소음의 저감사례연구 (Case study for noise reduction of an electric train caused by Main Transformer as a noise source)

  • 이강원;김원경;백광선;김진환
    • 한국철도학회:학술대회논문집
    • /
    • 한국철도학회 2003년도 추계학술대회 논문집(III)
    • /
    • pp.513-518
    • /
    • 2003
  • Noises are defined as unwanted sound and invoke the physical harm and unconvenience. The higher the noise level is, the more damage peoples have. Low frequency noise is less harmful than high frequency one. In case of train, noises inside of train which is isolated from outer circumstances reduce the convenience of passenger very much. This paper reviewed the noise standard of train for urban subway and investigated the main transformer as the main noise source of train and suggested the method to diminish the noise resulted from main transformer of train and compared the measured results of before and after the improvement of main transformer.

  • PDF

Wind-induced response of a twin-tower structure

  • Xie, Jiming;Irwin, Peter A.
    • Wind and Structures
    • /
    • 제4권6호
    • /
    • pp.495-504
    • /
    • 2001
  • With a newly developed multi-force-balance system(MFB), a twin-tower structure was studied for its wind-induced responses. The MFB system allowed the twin towers, which were linked structurally, to be treated as a single structural system with its corresponding modes of vibration involving coupled motions of the two towers. The towers were also studied using a more conventional force balance approach in which each tower was treated as an isolated structure, i.e., as though no structural link existed. Comparison of the results reveals how the wind loads between the towers are redistributed through the structural links and the modal couplings. The results suggest that although the structural links usually have beneficial impacts on wind-induced response, they may also play a negative role if the frequency ratios of pair modes are near 1.0.