• 한국정보전자통신기술학회논문지
• /
• 제9권2호
• /
• pp.185-189
• /
• 2016

에너지 절약형 전열제품 개발은 유가상승에 따라 국가의 최대 현안으로 꼽히고 있다. 따라서 최근에는 이러한 문제점들을 대처하기 위해 전기를 이용한 난방장치에 대한 에너지의 효율적 사용측면에서 경제성과 안정성을 높이기 위한 지속적인 연구 연구개발이 이루어지고 있고, 특히 고성능 및 신기능 소재에 대한 기술개발이 활발히 이루어지고 있다. 본 논문은 에너지 전달특성이 우수한 전열제품 개발에 관한 것으로 고효율 유도가열 장치에 관한 연구이다. 유도가열은 전자유도현상을 이용한 것으로 기존의 전도나 대류와 같은 열전달 방식과는 전혀 다르게 중간매질이 없이 피가열물에 직접 흡수되어 열로 전환되므로 급속, 균일하게 가열시키는 특징을 가진다. 또한 고주파 유도가열은 다양한 구조 설계가 가능하므로 가열 발열체를 적절히 활용하면 피가열물만을 집중가열 하는 것이 가능하다.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2006년도 춘계학술대회 논문집 전기기기 및 에너지변환시스템부문
• /
• pp.278-280
• /
• 2006

In this paper, a novel type of auxiliary active snubbingcircuit assisted quasi-resonant soft-switching pulse width modulation inverter is proposed for consumer induction heating equipments. The operation principle of this high frequency inverter is described using switching modes and equivalent circuits. This newly developed series resonant high frequency inverter can regulate its high frequency output AC power under a principle of constant frequency active edge resonant soft- switching commutation by asymmetrical PWM control system. The high frequency power regulation and actual power conversion efficiency characteristics of consumer induction heating (IH) products using the proposed soft-switching pulse width modulation (PWM) series load resonant high frequency inverter evaluated. The practical effectiveness and operating performance of high frequency inverter are discussion on the basis of simulation and experimental results as compared with the conventional soft-switching high frequency inverter.

• Journal of Power Electronics
• /
• 제7권3호
• /
• pp.246-256
• /
• 2007

In this paper, a novel type auxiliary active edge resonant snubber assisted zero current soft switching pulse modulation Single-Ended Push Pull (SEPP) series load resonant inverter using IGBT power modules is proposed for cost effective consumer high-frequency induction heating (IH) appliances. Its operating principle in steady state is described by using each switching mode's equivalent operating circuits. The new multi resonant high-frequency inverter with series load resonance and edge resonance can regulate its high frequency output power under a condition of a constant frequency zero current soft switching (ZCS) commutation principle on the basis of the asymmetrical pulse width modulation (PWM) control scheme. Brand-new consumer IH products using the proposed ZCS-PWM series load resonant SEPP high-frequency inverter using IGBTs is evaluated and discussed as compared with conventional high-frequency inverters on the basis of experimental results. In order to extend ZCS operation ranges under a low power setting PWM as well as to improve efficiency, the high frequency pulse density modulation (PDM) strategy is demonstrated for high frequency multi-resonant inverters. Its practical effectiveness is substantially proved from an application point of view.

• 전력전자학회:학술대회논문집
• /
• 전력전자학회 2001년도 Proceedings ICPE 01 2001 International Conference on Power Electronics
• /
• pp.75-79
• /
• 2001

This paper presents a novel version of an active voltage clamped ZVS-PWM high frequency inverter using IGBTs for electromagnetic induction eddy current-based rolling drum heating in new generation copy and printing machines in consumer business use. The operating principle of this inverter circuit and unique features are described herein. Its constant frequency duty cycle (asymmetrical PWM) controlled voltage source quasi-resonant soft switching high frequency inverter employing IGBTs is proposed, which is capable of achieving stable and efficient zero voltage soft switching commutation over a widely specified power regulation range from full power to low power. The operating performances in a steady state of this inverter is discussed and evaluated on basis of simulation and experimental results as an induction heated roller in new generation copy machine.

• 대한기계학회:학술대회논문집
• /
• 대한기계학회 2008년도 추계학술대회A
• /
• pp.1124-1128
• /
• 2008

Thin-wall injection molding is associated with many advantages, including increased portability, the conserving of materials, and the reduction of the molding cycle times. In the application of the thin-wall molding, a considerable reduction of the effective flow thickness results in filling difficulty. High-frequency induction is an efficient way to overcome this filling difficulty by means of heating the mold surface by electromagnetic induction. The present study applies the induction heating to the injection molding of thinwalled micro structures with high aspect ratio. The feasibility of the proposed heating method is investigated through a numerical analysis. The estimated filling characteristics of the micro-features are investigated with variations of mold temperature and part thickness, of which results are also compared with experimental measurements.

• 한국산학기술학회논문지
• /
• 제7권4호
• /
• pp.580-586
• /
• 2006

본 논문에서는 고주파 유도가열용 인버터를 제안하고 인버터의 출력제어에 대해 논하고 있다. 인버터의 출력제어 방법은 스위칭 소자에 인가되는 구동신호의 위상 천이에 따라 출력을 제어하고 있으며, 제안회로의 동작원리와 특성평가는 정규화 파라메타를 도입하여 기술하였다. 또한 회로설계에 필요한 출력특성은 수치해석에 의해 평가 자료를 도출하였고 이론결과와 실험결과를 비교하기 위하여 실험 장치를 제작하였으며 특성평가의 정당성을 입증하였다.

• 전력전자학회:학술대회논문집
• /
• 전력전자학회 2002년도 전력전자학술대회 논문집
• /
• pp.750-753
• /
• 2002

A novel single-stage half-bridge high frequency resonant inverter using ZVS(Zero Voltage Switching) with high input power factor suitable for induction heating applications is presented in this paper. The proposed high frequency resonant Inverter integrates half-bridge boost rectifier as power factor corrector(PFC) and half-bridge resonant inverter into a single stage. The input stage of the half-bridge boost rectifier is working in discontinuous conduction mode (DCM) with constant duty cycle and variable switching frequency. Simulation results through the Pspice have demonstrated the feasibility of the proposed inverter. This proposed inverter will be able to be practically used as a power supply in various fields as induction heating applications, DC-DC converter etc.

• 한국정보통신학회논문지
• /
• 제7권7호
• /
• pp.1533-1538
• /
• 2003

기존에 적용중인 유전가열 합성수지 접착기술의 경우 진공관 소자를 사용하여 10MHz 대역 이상의 스위칭 주파수를 사용하고, 유전손실이 비교적 높은 PVC 소재에 제한적으로 적용해 왔다. 다른 합성수지 소재에 비해서 유전손실이 낮은 친환경적인 소재에 대해서는 적용이 어려운 기술인 관계로 최근 들어 부각되는 친환경적 소재의 적용 확대로 인하여 기존 유전가열 방식의 접착기술은 한계에 접하고 있다. 본 논문에서는 고주파 유도가열 관련 기술을 응용하여 친환경적인 합성소재의 직접가열의 문제점을 간접가열에 의한 온도제어를 적용하여 고주파 유도가열 접착기를 설계하였다.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 1991년도 추계학술대회 논문집 학회본부
• /
• pp.214-218
• /
• 1991

This paper presents a PWM controlled cycloconverter with a DC resonant circuit for Induction heating. This cycloconverter converts commercial frequency power to high frequency power directly. So conversion efficiency improved. Controlling a input reactive power regardless of load power, it has sinusoidal input current waveforms as well as a input. displacement factor at 1.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 1990년도 추계학술대회 논문집 학회본부
• /
• pp.283-286
• /
• 1990

This paper presents a PWM controlled cycloconverter with a LC resonant circuit for induction heating. This cycloconverter converts commercial frequency power to high frequency power directly. So conversion efficiency improved. Controlling a input reactive power regardless of load power, it has sinusoidal input current waveforms as well as a input displacement factor at 1.