• 콘크리트학회논문집
• /
• 제12권4호
• /
• pp.103-111
• /
• 2000

The influence of the improvement of grain shape of the coarse aggregate to the unit powder content of concrete and the fine aggregate ratio for the increase of the flowability and segregation resistance of high performance concrete was examined. According to the experimental results, flowability and compacting of concrete presents best states in the S/a which has the smallest 패야 ratio. The coarse aggregate after improvement of grain shape, that has changed from the 0.68 of spherical rate of disk shape to 0.73, led fine aggregate ratio to be down 6% (i.e from 47% to 41%). The improvement of grain shape of the coarse aggregate also led the lowest unit powder content to be down 60kg/㎥ (ie from 530kg/㎥ to 470kg/㎥). And approximate 10% of unit water content has been reduced as unit powder content was down. However, the compressive strength after the improvement of grain shape of the coarse aggregate decreased to 5% due to decrease of adhesiveness of the aggregate and cement paste.

• 한국콘크리트학회:학술대회논문집
• /
• 한국콘크리트학회 1995년도 봄 학술발표회 논문집
• /
• pp.48-53
• /
• 1995

Recently, work of construction industry is not enough to do in tamping because of a lack of expert, advanced-age of worker, increase of structure of high-dengity arrangment and machanization of concrete pumping method Accordingly it is required for high-qualuily concrete with excellent flowability, Self-placeability and regregation registance. In this point of view, this study is investigated for requiremend properties of ultar-flow concrete using dimestic material as for development of Ultra-Flow concrete in the side of material

• 콘크리트학회지
• /
• 제8권3호
• /
• pp.135-146
• /
• 1996

본 연구에서는 5종류의 플라이애쉬를 포함한 초유동 콘크리트와 3종류의 일반 콘크리트에 대한 재료물성을 측정하여 서로 비교.분석하였다. 경화 전의 물성측정을 위해서 슬럼프 실험, 슬럼프 플로우 실험, O형 깔대기 실험, 박스 충전성 실험, L형 충전성 실험을 수행하였고 경화 후의 물성측정을 위해 압축강도 실험, 할렬인장강도 실험, 탄성계수 실험, 크리프 실험, 건조수축 실험 등을 수행하였다. 경화전의 물성측정 실험결과들을 바탕으로 초유동 콘크리트와 일반 콘크리트의 유동성과 충전성을 평가하였고 두 결과를 비교.분석하였다. 또한 경화 후의 물성측정 실험결과를 통하여 초유동 콘크리트의 재료역학적인 특성을 파악하였다. 자기충전성을 만족시킬만한 유동성과 작업성을 가지면서 40 MPa이상의 28일 압축강도를 갖는 양호한 재료역학적인 특성을 나타내는 초유동 콘크리트의 개발 가능성을 보였다. 일반적으로 초유동 콘크리트의 크리프 변형량은 일반 콘크리트보다 상대적으로 작았지만 건조수축은 일반 콘크리트보다 30%이상 컸다.

• 한국콘크리트학회:학술대회논문집
• /
• 한국콘크리트학회 2005년도 추계 학술발표회 제17권2호
• /
• pp.399-402
• /
• 2005

In ultra-high strength SFRCC(Steel Fiber Reinforced Cementious Composites), much silica fume are used to improve strength, flowability and durability. Silica fume have merits of filling the voids, enhancement of reheological chracteristics, production of secondary hydrates by pozzolanic reaction in reactive powder concretes. However silica fume has been imported in high-cost in domestic industry, we need to investigate replaceable material in stead of silica fume in a view of economy Therefore, in this paper, in order to investigate replacement of silica fume in ultra-high strength SFRCC we used the granulate blast-furnce slag with finess 4000, 6000, 8000. As a results, we have evaluated that the bigger the finess the more increase compressive strength of ultra-high strength SFRCC using the blast-furnce slag and there was no problem from the viewpoint of flowability and compressive strength when we use blast-furnce $50\%$ with replacement ratio of silica fume

• 콘크리트학회논문집
• /
• 제24권1호
• /
• pp.37-44
• /
• 2012

최근 건설 시공기술의 발달에 따라 고유동 고강도화된 고성능 콘크리트의 사용이 일반화되고 있는 추세이다. 이러한 고성능 콘크리트는 일반 콘크리트에 비해 혼화재 및 고성능AE감수제의 사용 등을 통해 요구 성능을 확보할 수 있으며, 기존의 경우 고성능 콘크리트의 품질 변동에 미치는 혼화재료의 영향에 대해 다양한 연구 결과는 보고되고 있다. 그러나, 콘크리트의 가장 중요한 원자재인 시멘트가 고유동 콘크리트 품질에 미치는 영향에 대한 연구 보고는 아직은 미흡한 실정이다. 따라서 시멘트 품질과 고유동 콘크리트의 유동 특성의 상관성을 검토하기 위해 국내 시판중인 시멘트 제품들을 대상으로 제품별 품질 특성을 명확히 구명하고, 시멘트 품질 특성이 고유동 콘크리트 제조시 유동 특성에 미치는 영향을 평가하였다. 연구 결과 분말도 및 시멘트의 초기 수화과정에 관여하는 화학조성, 간극상 등은 감수제의 사용량에 영향을 미치며, 특히, 분말도는 제조사별 품질 특성에 상관없이 매우 높은 상관성을 나타내고 있다. 강도발현특성에 있어서는 감수제 사용량의 변화는 초기 재령에 영향을 미치지만 장기재령에서는 거의 영향이 없는 것으로 나타났다.

• 한국콘크리트학회:학술대회논문집
• /
• 한국콘크리트학회 1995년도 가을 학술발표회 논문집
• /
• pp.41-44
• /
• 1995

The purpose of this study is analyze to the properties of high fluidity concrete(W/C 35~50%) with the dosage of viscosity agent(Hydroxy Propyl Methyl Cellulose ; HPMC ; 15U), From the resuls, flowability was good about 200g/㎥. segregation-resisibility and placeability were good upward 300g/㎥, To synthetic, the dosage of viscosity agent are discovered best in 200~400g/㎥

• 한국콘크리트학회:학술대회논문집
• /
• 한국콘크리트학회 2002년도 봄 학술발표회 논문집
• /
• pp.551-556
• /
• 2002

High-performance concrete is defined as concrete that meets special combinations of performance and uniformity requirements that cannot always be achieved routinely using conventional constituents and normal mixing, placing, and curing practices. Ever since the term high-performance concrete was introduced into the industry, it had widely used in large-scale concrete construction that demands high-strength, high-flowability, and high-durability. To obtain such performances that cannot be obtained from conventional concrete and by the current method, a large number of trial mixes are required to select the desired combination of materials that meets special performance. In this paper, therefore, using genetic algorithm which is a global optimization technique modeled on biological evolutionary process-natural selection and natural genetics-and can be used to find a near optimal solution to a problem that may have many solutions, the new design method for high-performance concrete mixtures is suggested to reduce the number of trial mixtures with desired properties in the field test. Experimental and analytic investigations were carried out to develop the design method for high-performance concrete mixtures and to verify the proposed mix design.

• 한국건축시공학회지
• /
• 제8권5호
• /
• pp.85-91
• /
• 2008

Prepacked concrete has recently been used in the special constructions fields such as underwater concrete work, heavy-weight concrete work, underground structure work, partial repair works for damaged reinforced concrete structures. and polymer-modified mortars have been employed as grouting mortars for the prepacked concrete. The purpose of this study is to recommend the optimum mix design of polymer-modified grouting mortars for prepacked concrete. Polymer-modified mortars using SBR and EVA emulsions as admixture of grouting mortars for prepacked concrete are prepared with various mix proportions such as sand-binder ratio, fly ash replacement ratio, polymer-binder ratio. and tested for flowability, viscosity of grouting mortars, bleeding ratio, expansion ratio, flexural and compressive strengths of grouting mortars and compressive and tensile strengths of prepacked concretes. From the test results, it is apparent that polymer-modified mortars can be produced as grouting mortars when proper mix design is chosen. We can design the mix proportions of high strength mortars for prepacked concrete according to the control of mix design factors such as type of polymer, polymer-binder ratio, sand-binder ratio and fly ash replacement ratio. Water-binder ratio of plain mortars for a constant flowability value are in the ranges of 43% to 50%. SBR-modified mortar has a little water-binder ratios compared to those of plain mortar, however, EVA-modified mortar needs a high water-binder ratio due to a high viscosity of polymer dispersion. The expansion and bleeding ratios of grouting mortars are also controlled in the proper value ranges. Polymer-modified grouting mortars have good flexural. compressive and tensile strengths, are not affected with various properties with increasing fly ash replacement to cement and binder-sand ratio. In this study, SBR-modified grouting mortar with a polymer-binder ratio of 10% or less, a fly ash replacement of 10% to cement and a sand-binder ratio of 1.5 is recommended as a grouting mortar for prepacked concrete.

• 한국콘크리트학회:학술대회논문집
• /
• 한국콘크리트학회 1998년도 가을 학술발표논문집(II)
• /
• pp.301-306
• /
• 1998

Aggregate as the component of High Flowing Concrete has much influence on the properties of High Flowing Concrete according to the quality and condition because the aggregate occupy a lot of concrete volume. The shape and size of aggregate affect a lot spatial passibility and fillingability. The segregation is easy to occur when the rate of Fine aggregate is high so that Fluidity is much affected by aggregate factor. In this study, therefore, we try to understand the various fluidity according to the fine aggregate of standard grade rang, the size of Coarse aggregate and the rate of fine aggregate to confirm the manufacturing possibility of High Flowing Concrete by examination on the influence of fresh state of high flowing concrete such as flowability, reinforcement passibility, fillingability, segregation resistance.

• 한국콘크리트학회:학술대회논문집
• /
• 한국콘크리트학회 1997년도 가을 학술발표회 논문집
• /
• pp.381-384
• /
• 1997

It is necessary for manufacturing the high flowing to use the fly-ash as binder of concrete, therefore, Quality of fly-ash is very important to the fluidity of high flowing concrete. In this study, it is comparing and investigating the fludity of high flowing concrete used some fly-ash which it's Ignition loss is 2.44, 4.90, 7.10%. As a result of this experimental study, Ignition loss of fly-ash effects the properties of high flowing concrete, such as air content, flowability, passability etc. but even if valve of ignition loss is upper the specification, properties of high flowing concrete such as setting and hardening time, compressive strength etc.