• 한국초전도ㆍ저온공학회논문지
• /
• 제23권3호
• /
• pp.5-9
• /
• 2021

Comprehensive utilization of sulfur-containing iron tailings (SIT) not only solves environmental problems but also creates certain economic value. The iron element from SIT was enriched by the superconducting high gradient magnetic separation (S-HGMS) technology in this study. In the experiments, the total iron content (TFe) was increased from 26.3% to 60.5% with the total sulfur content (TS) of 5.9% under the optimal parameters, i.e., a magnetic flux density of 0.4 T, a slurry flow rate of 1500 mL/min. The high-quality sulfur-containing material with TFe of more than 60% was obtained, which can be used for preparing high-sulfur free cutting steel. The S-HGMS technology can realize the resource utilization of iron tailings with high added value.

• 도시과학
• /
• 제8권1호
• /
• pp.45-49
• /
• 2019

The land treatment of sewage sludge is necessary because sewage sludge is increasing year by year. Therefore the research of sewage sludge solidification is underway as one of the land treatment methods. However, the problem with existing sewage sludge solidification is that the moisture content of sewage sludge is high and the dewaterability is low. Because of high drying cost the efficiency of energy production is low and the calorific value is insufficient. So the disposer is supplied with a filtration and caloric aid for improving dewaterability and calorific value. In this study, it is aimed to improve the fuel value of sewage sludge by confirming the feasibility of waste wood as a filtration and caloric aid. The dewaterability was measured by CST-test and the calorific value was measured by bomb calorimeter. As a result the dewaterability and calorific value are improved in all of the samples. The dewaterability was improved as the waste wood was added in the sewage sludge. By adjusting the waste wood adding rate into the sewage sludge the dewaterability and calorific value of sewage sludge will be improved. This study confirmed possibility of the waste wood used as filtration and caloric aid.

• 한국정보처리학회논문지
• /
• 제7권4호
• /
• pp.1263-1270
• /
• 2000

The operation frequency of High-speed Communication System becomes very fast with the advanced technology of VLSI chips and system implementation. There may exist various types of noise sources degrading the signal integrity in this system. The present main system is made of backplane, so faults can be brought whenever a board is removed, replaced or added. This backplane boards testing is a very important process to verify the operation of system. firstly, we model the effects of the internal noises in the High-speed Communication System to the signal line and propose a new design method to minimize these effects. For the design methodology, we derive the characterization value for each mode land them construct the optimal simulation model. We compare the result of own proposing method with that fo the existing methods, through simulation and show that the quality of High-speed Communication System is significantly enhanced. Secondary our proposing BIST for the Backplane Boards Testing is designed to guarantee that there is no fault in the high-speed communication system.

• Elastomers and Composites
• /
• 제57권4호
• /
• pp.215-221
• /
• 2022

In this study, high-penetration asphalt with low greenhouse gas emissions was used in the asphalt mixing process to reduce the carbon emissions during the reaction due to its capacity to be produced even at low temperatures. In effect, cationic, anionic, and non-ionic dispersants were added and mixed in different feeding ratios, seeking an effective dispersion of the modifiers (SIS, PS, TPEE, and SEBS) into the high-penetration asphalt matrix and forming an asphalt binder with a melting point of 120 ℃. The compatibility of the modifiers and the high-penetration asphalt was examined using SEM and DSC techniques, and the role of NDP-1 as a dispersant was carefully investigated with respect to dissolution time. The analyses showed that: (1) the dispersibility of the asphalt binder is good when the non-ionic dispersant is used; (2) as the concentration of the non-ionic dispersant increases, the dissolution time decreases and the domain size contracts; (3) the ND70-PS has the shortest dissolution time, the lowest agglomeration rate, and a single Tg value.

• 한국공작기계학회:학술대회논문집
• /
• 한국공작기계학회 2004년도 춘계학술대회 논문집
• /
• pp.231-234
• /
• 2004

Ratio that robot occupies is low level worldwide fairly in suspension wire, electricity electron and neutralization learning industry and domestic industry of this is staring in average love. Can speak that grafting of robotic machine and neutralization learning industry is high in terms of side of creation of the added value or progress of technology rightly hereupon. This research raises or designed multi-function handling robot that can make welding, assembly conveniently catching large size work water

• 한국가스학회:학술대회논문집
• /
• 한국가스학회 1998년도 추계학술발표회 논문집
• /
• pp.277-280
• /
• 1998

• 기술사
• /
• 제32권6호
• /
• pp.77-79
• /
• 1999

This paper has the general idea and definition of product design in industrial design which creates high value added for new products. In addition, it has the relationship to be desired between the engineers and product designers, while developing the products. This paper briefly introduces the role and ability of the product design professional engineers with the best skills approved by the nation.

• 산업경영시스템학회지
• /
• 제15권26호
• /
• pp.201-215
• /
• 1992

Plant industry, which get high added value, renders to finding a new market for foreign trade by reducing its trouble and promoting economic collaboration. Inspite of this advance, korea plant industry has low techical know-how and has not been koreanized yet. This report presents the range and characteristics of the korean plant industry in chapter one, the present condition in chapter two, and the trend of plant industry of the world in chapter three. It concludes by showing the reform measures of korean plant industry which promoting korean export.

• 한국섬유공학회:학술대회논문집
• /
• 한국섬유공학회 1998년도 가을 학술발표회논문집
• /
• pp.402-405
• /
• 1998

Among the production technologies of nonwoven fabrics, a needle punching technique has one of the long history aid holds still important place. At the present time, it is used not only for scrimming with woven or knitted fabrics and other nonwoven fabrics, but also for applying the special fibers blending nonwovens at the web forming process in ender to manufacture economical and high value added-Products such as home furnishing industrial and technical purpose. (omitted)

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 1996년도 추계학술대회 논문집
• /
• pp.542-547
• /
• 1996

So far, this report is written by knowledge auf standard through several reference drawing and experienced contents with drawing ere die of Item. The contents about actual production is so huge that I will write about it next time. Comparatively high added value Hemming die of is important for automobile development but its not proper for producing small quantity. In the future, I believe that simple easy to correct and reasonable price hemming die will be producted