• Proceedings of the Korean Vacuum Society Conference
• /
• 2012.02a
• /
• pp.470-470
• /
• 2012

Organic thin film transistors (OTFTs) backplane constitute the active elements in new generations of plastic electronic devices for flexible display. The overall OTFTs performance is largely depended on the properties and quality of each layers of device material. In solution based process of organic semiconductors (OSCs), the interface state is most impediments to preferable performance. Generally, a threshold voltage (Vth) shift is usually exhibited when organic gate insulators (OGIs) are exposed in an ambient air condition. This phenomenon was caused by the absorbed polar components (i.e. oxygen and moisture) on the interface between OGIs and Soluble OSCs during the jetting process. For eliminating the polar component at the interface of OGI, the role of high vacuum seasoning on an OGI for all solution processable OTFTs were studied. Poly 4-vinly phenols (PVPs) were the material chosen as the organic gate dielectric, with a weakness in ambient air. The high vacuum seasoning of PVP's surface showed improved performance from non-seasoning TFT; a $V_{th}$, a ${\mu}_{fe}$ and a interface charge trap density from -8V, $0.018cm^2V^{-1}s^{-1}$, $1.12{\times}10^{-12}(cm^2eV)^{-1}$ to -4.02 V, $0.021cm^2V^{-1}s^{-1}$, $6.62{\times}10^{-11}(cm^2eV)^{-1}$. These results of OTFT device show that polar components were well eliminated by the high vacuum seasoning processes.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2012.08a
• /
• pp.256-256
• /
• 2012

Oxide semiconductors such as zinc tin oxide (ZTO) or indium gallium zinc oxide (IGZO) have attracted a lot of research interest owing to their high potential for application as thin film transistors (TFTs) [1,2]. However, the instability of oxide TFTs remains as an obstacle to overcome for practical applications to electronic devices. Several studies have reported that the electrical characteristics of ZnO-based transistors are very sensitive to oxygen, hydrogen, and water [3,4,5]. To improve the reliability issue for the amorphous InGaZnO (a-IGZO) thin-film transistor, back channel passivation layer is essential for the long term bias stability. In this study, we investigated the instability of amorphous indium-gallium-zinc-oxide (IGZO) thin film transistors (TFTs) by the back channel contaminations. The effect of back channel contaminations (humidity or oxygen) on oxide transistor is of importance because it might affect the transistor performance. To remove this environmental condition, we performed vacuum seasoning before the deposition of hybrid passivation layer and acquired improved stability. It was found that vacuum seasoning can remove the back channel contamination if a-IGZO film. Therefore, to achieve highly stable oxide TFTs we suggest that adsorbed chemical gas molecules have to be eliminated from the back-channel prior to forming the passivation layers.

• Food Science of Animal Resources
• /
• v.25 no.4
• /
• pp.442-448
• /
• 2005

This study was carried out to evaluate the quality characteristics of the vacuum packed pre-aged venison with seasoning during chilled storage. The ham of deer were cut to cube and two seasonings such as red pepper sauce (T1) or soy sauce (T2) were seasoned by the proportions or meat to seasonings (1:1), respectively. The seasoned venison was aging by fill into plastic box at $0\pm1^{\circ}C$ for 10 days. And then, the aged meat from each pack was vacuum-packaged and stored at $0\pm1^{\circ}C$ for up to 28 days. pH were significantly decreased with storage periods in all treatments (p<0.05). Salinity $(\%)$ were no significant differences in T1 during the whole storage, but T2 had significantly high content $(1.33\%)$ at the storage days of 28 (p<0.05). Saccarinity $(\%)$ of T1 were significantly higher than that of T2 during the whole storage periods (p<0.05). As storage time extended the value of $L^*$ and $b^*$ in T1 were increased and those values decreased in T2. $a^*$ and shear force $(g/cm^2)$ or T1 and T2 were increased as the storage period passed In the result of sensory evaluation. all treatment had relatively high score $(T1\;6.75\~T2\;7.00)$ in overall acceptability during the storage period of 28 days. In conclusion, this study suggest that vacuum packed pre-aged venison with seasoning may be useful for new deer meat menu.

• Korean Journal of Fisheries and Aquatic Sciences
• /
• v.51 no.6
• /
• pp.632-639
• /
• 2018

To develop the high-value added seafood products from a regional speciality seafood, the seasoned dried pen shell Atrina pectinata adductor (SDPA) and seasoned smoke-dried pen shell adductor (SSPA) samples were prepared, and their optimal processing conditions, quality metrics, and shelf-life characteristics were examined. SDPA and SSPA samples were produced by thawing of frozen pen shell adductor, and cutting it into 6-7 mm slices, hot-air drying ($60^{\circ}C$, 20 min) or smoking ($110^{\circ}C$, 20 min), seasoning ($4^{\circ}C$, 12 h) with seasoning powder (60% sorbitol, 15% sucrose, 16% salt and 9.0% monosodium glutamate), hot-air drying ($60^{\circ}C$, 3 h), torching, vacuum-packaging in a laminated plastic film bag, heat treating with hot-water ($85^{\circ}C$, 15 min), and cooling. The moisture content of SDPA and SSPA samples was 44.5 and 43.0%, respectively, and the water activity was 0.845 and 0.842. The total amino acids in SDPA and SSPA samples were 20,986.8 and 21,312.4 mg/100 g, respectively, and the major amino acids in both products were aspartic acid, serine, glutamic acid, proline, glycine, alanine, valine, leucine, phenylalanine, lysine and arginine. The primary minerals were Na, S, K and P. Incubating tests indicated that the quality of SDPA and SSPA samples was maintained for 30 days of storage.

• Journal of the Korean Wood Science and Technology
• /
• v.2 no.3
• /
• pp.3-16
• /
• 1974

One of the disadvantages of. wood and wood products is their hydroscopicity or dimensional instability. This is responsible for the loss of green volume of lumber as seasoning degrade. Dimensional stabilization is needed to substantially reduce seasoning defects and degrades and for increasing the serviceability of wood products. Recently, considerable world-wide attention has been drawn to the so-called Wood-Plastic Composites by irradiation-and heat-catalyst-polymerization methods and many research and developmental works have been reported. Wood-Plastic Composites are the new products having the superior mechanical and physical properties and the combinated characteristics of wood and plastic. The purpose of this experiment was to obtain the basic data for the improvement of wooden materials by manufacturing WPC. The species examined were Mulpurae-Namoo (Fraxinus, rhynchophylla), Sea-Namoo (Carpinus laxiflora), Cheungcheung-Namoo (Cornus controversa), Gorosae-Namoo (Acermono), Karae-Namoo(Juglans mandshurica) and Sanbud-Namoo (Prunus sargentii), used as blocks of type A ($3{\times}3{\times}40cm$) and type B ($5{\times}5{\times}60cm$), and were conditioned to about 10~11% moisture content before impregnation in materials humidity control room. Methyl methacrylate (MMA) as monomer and benzoyl peroxide (BPO) as initiator are used. The monomer containing BPO was impregnated into wood pieces in the vacuum system. After impregnation, the treated samples were polymerized with heat-catalyst methods. The immersed weights of monomer in woods are directly proportionated to the impregnation times. Monomer impregnation properties of Cheungcheung-Namoo, Mulpurae-Namoo and Seo-Namoo are relatively good, but in Karae-Namoo, it is very difficult to impregnate the monomer MMA. Fig. 3 shows the linear relation between polymer retentions in wood and polymerization times; that is, the polymer loadings are increasing with polymerization times. Furthermore species, moisture content, specific gravity and anatomical or conductible structure of wood, bulking solvents and monomers etc have effects on both of impregnation of monomer and polymer retention. Physical properties of treated materials are shown in table 3. Increasing rates of specific gravity are ranged 3 to 24% and volume swelling 3 to 10%. ASE is 20 to 46%, AE 14 to 50% and RWA 18 to 40%. Especially, the ASE in relation to absorption of liquid water increases approximately with increase of polymer content, although the bulking effect of the polymerization of monomer may also be influential. WPCs from Mulpurae-Namoo and Cheungcheung-Namoo have high dimensional stability, while its of Karae-Namoo and Seo-Namoo are-very low. Table 4 shows the mechanical properties of WPCs from 6 species. With its specific gravity and polymer loading increase, all mechanical properties are on the increase. Increasing rate of bending strength is 10 to 40%, compression strength 25 to 70%, ;impact bending absorbed energy 4 to 74% and tensile strength 18 to 56%. Mulpurae-Namoo and Cheungcheung-Namoo with high polymer content have considerable high increasing rate of strengths. But incase of Karae-Namoo with inferior monomer impregnation it is very low. Polymer retention in cell wall is 0.32 to 0.70%. Most of the polymer is accumulated in cell lumen. Effective. of polymer retention is 58.59% for Mulpurae-Namoo, 26.27% for Seo-Namoo, 47.98% for Cheungcheung-Namoo, 25.64% for Korosae-Namoo, 9.96% for Karae-Namoo and 25.84% for Sanbud-Namoo.