• Journal of Welding and Joining
• /
• 제31권5호
• /
• pp.59-63
• /
• 2013

A bendable electronic module has been developed for a mobile application by using a low-cost roll-to-roll manufacturing process. In flexible embedded electronic module, a thin silicon chip was embedded in a polymer-based encapsulating adhesive between flexible copper clad polyimide layers. To confirm reliability and durability of prototype bendable module, the following tests were conducted: Moisture sensitivity level, thermal shock test, high temperature & high humidity storage test, and pressure cooker tester. Those experiments to induce failure of the module due to temperature variations and moisture are the experiment to verify the reliability. Failure criterion was 20% increase in bump resistance from the initial value. The mechanism of the increase of the bump resistance was analyzed by using non-destructive X-ray analysis and scanning acoustic microscopy. During the pressure cooker test (PCT), delamination occurred at the various interfaces of the bendable embedded modules. To investigate the failure mechanism, moisture diffusion analysis was conducted to the pressure cooker's test. The hygroscopic characteristics of the encapsulating polymeric materials were experimentally determined. Analysis results have shown moisture saturation process of flexible module under high temperature/high humidity and high atmosphere conditions. Based on these results, stress factor and failure mechanism/mode of bendable embedded electronic module were obtained.

• 한국표면공학회지
• /
• 제34권2호
• /
• pp.161-168
• /
• 2001

A Thermal Barrier Coating (TBC) can play an important role in protecting parts from harmful environments at high temperatures such as oxidation, corrosion, and wear in order to improve the efficiency of aircraft engines by lowering the surface temperature of the turbine blade. The TBC can increase the life span of the product and improve the operating properties. Therefore, in this study the mechanical and thermal properties of the TBC such as oxidation, fatigue and shock at high temperatures were evaluated. A samples of a bond coat (CoNiCrAlY) produced by the High Velocity Oxygen Fuel (HVOF) and Low Pressure Plasma Spray (LPPS) method were used. The thickness of the HVOF coating layer was approximately $450\mu\textrm{m}$ to 500$\mu\textrm{m}$ and the hardness number of the coating layer was between 350Hv and 400Hv. The thickness of the LPPS coating was about 350$\mu\textrm{m}$ to 400$\mu\textrm{m}$ and the hardness number of the coating was about 370Hv to 420Hv. The X-ray diffraction analysis showed that CoNiCrAlY coating layer of the HVOF and LPPS was composed of the $\beta$and ${\gamma}$phase. After the high temperature oxidation test, the oxide scale with about l0$\mu\textrm{m}$ to 20$\mu\textrm{m}$ thickness appeared at the coating surface on the Al-depleted zone was observed under the oxide scale layer.

• 한국연소학회:학술대회논문집
• /
• 한국연소학회 2005년도 제31회 KOSCO SYMPOSIUM 논문집
• /
• pp.255-260
• /
• 2005

To achieve efficient combustion within a manageable length, a successful fuel injection scheme must provide rapid mixing between the fuel and airstreams. The aim of the present numerical research is to investigate the flame holding and combustion enhancement. Additional fuel into the cavity prevents shear flow impingement on the trailing edge of the cavity. The high temperature freestream flow mixes with the cold hydrogen fuel that is injected into the cavity and raises the fuel temperature remarkably and become to start combustion. The high pressure in the cavity due to the cavity structure and combustion leads the hydrogen fuel to upstream. The shock in the cavity to be generated by the fuel injection joins together and reflects off the ceiling wall. This makes high pressure and low mach number region and makes a small recirculation in this region. This high stagnation temperature is nearly recovered in the shear layer in front of the cavity and leads to start combustion. In the downstream of the cavity, the wall pressure drops significantly. This means that the combustion phenomenon is diminished. Because fuel lumps at the trailing edge of the cavity then it spreads after the cavity so, in this region there is a strong expansion.

• 한국잠사곤충학회지
• /
• 11호
• /
• pp.63-68
• /
• 1970

가잠의 Virus다각체의 저온 및 고온처리에 대한 유발현상을 조사하기 위하여 5령기잠을 공시하고 저온(5$^{\circ}C$, 24hrs.), 고온(Hot water bath 에 4$0^{\circ}C$, 5min으로 침지 및 Oven 내에 4$0^{\circ}C$, 30min.으로 단독 및 복합처리하여 핵다각체병(N) 중장형 다각체병(C), 병발형(NC) 유발률을 조사하고 동시에 핵다각체병(N)과 중장형다각체병(C)대하여 Giemsa solution 염색법에 의한 염색성을 조사하였다. 1. 냉장(5$^{\circ}C$, 24 시간) 처리와 고온(Hot water bath, 4$0^{\circ}C$, 5분간) 처리를 한 핵복다각체병(N)은 중장형다각체병(C)보다 그 유발률이 적고 또 복합처리에 있어서도 중장형다각테병(C)의 유발율은 핵다각체병(N)보다 많다. 2. 냉장처리후 고온(4$0^{\circ}C$, 30분간 건열) 처리, 반대로 고온처리후 냉장처리한 Virus다각체의 유발률도 중장형다각체병(C) 보다 핵형다각예병(N)의 유발현상이 현저하게 많이 나타났다. 3. Giemsa solution 염색법에 의한 핵다각체병(N)의 다각체는 염색이 되지 않으나 중장형다각예병(C)의 다각체는 잘 염색되어 염색성에 의하여 구별할 수 있었다.

• 한국재료학회:학술대회논문집
• /
• 한국재료학회 1993년도 춘계학술발표회
• /
• pp.118-119
• /
• 1993

Aluminium titanate (Al$_2$TiO$_{5}$) as structural ceramics is known as a low thermal exansion, a low thermal conductivity, a low Young's modulus, and excellent thermal shock resistant material. These properities allow for the testing as an insulating material in engines for portliner, piston bottom an turbo charger. However, those composites has low mechanical strength due to the presence of microcracks developed by the large difference in thermal expansion coefficients along crystallographic directions exceed the internal strength of material and its tendency to decompose into $Al_2$O$_3$ and TiO$_2$ at temperature below 130$0^{\circ}C$ limit however the application of aluminium titanate.e.

• Journal of Microbiology and Biotechnology
• /
• 제22권1호
• /
• pp.118-125
• /
• 2012

Heat shock proteins (Hsps) play a key role in the cellular defense response to diverse environmental stresses. Here, the role of Hsp genes in the acquisition of thermotolerance in the cyanobacterium Microcystis aeruginosa NIES-298 was investigated. Twelve Hsp-related genes were examined to observe their modulated expression patterns at different temperatures (10, 15, 25, and $35^{\circ}C$) over different exposure periods. HspA and HtpG transcripts showed an up-regulation of expression at low temperatures (10 and $15^{\circ}C$) and high temperature ($35^{\circ}C$), compared with the control ($25^{\circ}C$). To examine their effects upon thermotolerance, we purified recombinant HspA and HtpG proteins. During a thermotolerance study at $54^{\circ}C$, the HspA-transformed bacteria showed increased thermotolerance compared with the control. HtpG also played a role in the defense response to acute heat stress within 30 min. These findings provide a better understanding of cellular protection mechanisms against heat stress in cyanobacteria.

• 한국결정학회:학술대회논문집
• /
• 한국결정학회 2002년도 정기총회 및 추계학술연구발표회
• /
• pp.24-24
• /
• 2002

HtrA (high temperature requirement A), a periplasmic heat shock protein, is known to have molecular chaperone function at low temperatures and proteolytic activity at elevated temperatures. To investigate the mechanism of functional switch to pretense, we have determined the crystal structure of the N-terminal protease domain (PD) of HtrA from Thermotoga maritima. HtrA PD shares the same fold with chymotrypsin-like serine professes. However, crystal structure suggests that HtrA PD is not an active pretense at current state since its active site is not formed properly and blocked by an additional helical lid. On the surface of the lid, HtrA PD has hydrophobic patches that could be potential substrate binding sites for molecular chaperone activity. Present structure suggests that the activation of the proteolytic function of HtrA PD at elevated temperatures might occur by the conformational change.

• 환경위생공학
• /
• 제14권1호
• /
• pp.54-61
• /
• 1999

The industrial techniques of ultrasound have been used in the various fields, such as cleaning, medical surgery, emulsification, cell disruption etc. Especially the application of cell disruption was interested in the field of disinfection process in water by ultrasonic irradiation. It has been recognized that the ultrasounds are irradiated in aqueous solution, cavitation bubbles are generated and shock waves of high temperature and pressure are emitted as the bubbles are developed and finally broken, which function as a energy source to promote reaction efficiencies of various kinds of chemical reactions such as disinfection reaction in water. Therefore, this study was performed to apply the ultrasound for the disinfection method of infected drinking raw water and to discuss the limiting factors such as pH, sample volume and reaction temperature influenced on the removal efficiency of E. coli from experimental analysis of the results obtained in bench-scale plant. For the experiments to measure the influence of reaction parameters in the ultrasonic disinfection process, escalated reactivity of aqueous solutions was excellent when pH in aqueous solution was low, and sample volume was small. On the contrary, the reactivity of disinfection became elevated when reaction temperature was high. It was found that the rate constant of disinfection reaction was applied by Chick's law, reaction kinetics of Chick's law was irreversible and pseudo-first order at all the tested conditions.As a conclusion it appeared that the technology using ultrasonic irradiation can be applied to the treatment of disinfection in infected water which are difficult to be treated by conventional methods.

• 암석학회지
• /
• 제19권4호
• /
• pp.255-267
• /
• 2010

최근 많은 발전을 이룬 (U-Th)/He 온도-연령 측정법은 광물내의 빠른 He 확산 특성을 이용해 지각 천부의 열역사 혹은 매우 짧은 열적 교란 등을 규명하는데 널리 쓰이고 있다. 이번 논평에서는 이 방법이 어떻게 화성운석의 열역사, 특히 화성(Mars)에서 방출시의 열적교란을 규명하는데 이용될수 있는지에 대한 기존 연구 및 전망에 대해 기술하였다. 모든 화성운석은 화성에서 방출될 당시 충격변성작용을 겪은 것으로 알려져 있는데, 이러한 작용의 온도조건을 규명하기 위해 충격실험을 통한 암석 조직 비교, 고지자기학적 연구, $^{40}Ar/^{39}Ar$ 및 (U-Th)/He 온도-연령측정법 등이 이용되었다. 각각의 방법은 장단점이 있으며 열역사를 밝히는데 단편적인 정보만을 제공하지만, 이러한 다양한 방법들이 동시에 적용되었을때 보다 신빙성있는 열역사를 알아낼 수 있다. ALH84001 화성운석의 경우 화성에서 방출될 당시의 조건에 대해 논란이 많은데 이는 위에 언급한 방법들로부터 서로 상반된 결론이 도출되었기 때문이다. 최근 단입자 (U-Th)/He 및 $^{40}Ar/^{39}Ar$ 결과를 동시에 만족하는 열역사를 규명한 연구가 ALH84001 화성운석에 대해 이루어 졌는데, 이는 앞으로의 운석 연구에 좋은 방법론을 제시할 수 있으리라 본다.

• KSBB Journal
• /
• 제24권1호
• /
• pp.96-100
• /
• 2009

본 연구에서는 저온에서의 재조합 단백질 생산성 향상을 위하여 저온에서 RNA 샤페론 활성을 지닌다고 알려진 CspA 단백질의 발현이 서로 다른 온도에서 대장균의 성장 및 GFP의 발현 속도에 어떻게 영향을 미치는지를 살펴보았다. $20^{\circ}C$, $25^{\circ}C$, $37^{\circ}C$에서는 세포 성장 및 GFP의 생산이 CspA의 발현에 영향을 받지 않았으나, $15^{\circ}C$에서는 GFP의 총 생산성이 CspA의 동시 발현에 의해 향상되었으며 이는 세포 성장 속도의 향상에 기인함을 확인하였다. 결론적으로 CspA의 발현은 $15^{\circ}C$에서 세포 당 재조합 단백질 생산량의 증가에는 영향을 미치지 않으나, 즉 재조합 단백질의 번역 효율에는 큰 영향을 미치지 않으나, 대장균 성장 속도에 영향을 미치며, 이를 통해 재조합 단백질의 총 생산량 향상을 유도 할 수 있을 것으로 기대된다.