• Applied Biological Chemistry
• /
• v.35 no.6
• /
• pp.485-489
• /
• 1992

Plants are altered not only in the outward appearance but also in their physiological and biochemical properties with reaction to the environmental stresses; particularly, the biosynthetic system of protein in situ rapidly responds to this. In order to investigate the change of properties of polypeptides in rice plants induced by several stresses, the seedlings were subjected to exposure to NaCl, drought, and low and high temperatures, respectively, and then some aspects of polypeptide variations were compared. Without exception, the rice plant, which is somewhat tolerant to environmental change, shows the alteration in several polypeptides. Moreover, newly synthesized polypeptides were observed in response to stresses. The existing proteins for the primary metabolic pathways were markedly decreased as each treatment progressed.

• Journal of the Korean Institute of Electrical and Electronic Material Engineers
• /
• v.35 no.4
• /
• pp.412-417
• /
• 2022

Capacitive-type humidity sensors with a high sensitivity and fast response/recovery times have attracted a great attention in non-contact respiration biological signal monitoring applications. However, complicated fabrication processes involving high-temperature heat treatment for the hygroscopic film is essential in the conventional ceramic-based humidity sensors. In this study, a non-toxic ceramic/metal halide (BaTiO₃(BT)/NaCl) humidity sensor was prepared at room temperature using a solvent-free aerosol deposition process (AD) without any additional process. Currently prepared BT/NaCl humidity sensor shows an excellent sensitivity (245 pF/RH%) and superior response/recovery times (3s/4s) due to the NaCl ionization effect resulting in an immense interfacial polarization. Furthermore, the non-contact respiration signal variation using the BT/NaCl sensor was determined to be over 700% by maintaining the distance of 20 cm between the individual and the sensor. Through the AD-fabricated sensor in this study, we expect to develop a non-contact biological signal monitoring system that can be applied to various fields such as respiratory disease detection and management, infant respiratory signal observation, and touchless skin moisture sensing button.

• Proceedings of the Korea Concrete Institute Conference
• /
• 2002.05a
• /
• pp.201-206
• /
• 2002

The purpose of this study is to improve the anti-corrosive properties of coated reinforcing bar using polymer cement slurry. Poymer cement slurry are prepared with three types of polymer dispersions and corrosion inhibiting admixture. And tested for corrosion accelerating tests such as immersion in NaCl 10% solution NaCl 10% solution spray, high temperature and pressure steam in condition of 8cycles, carbonation before and after, penetration of NaCl solution. From the test results, it is concluded that the anti-corrosive properties are considerably improved by coating using polymer cement slurry at surface of reinforcing bar. And this trend is marked by adding of corrosion inhibiting admixture. The difference of the anti-corrosive properties is hardly recognized according to types of polymer dispersions. The anti-corrosive properties of coated reinforcing bar using polymer foment slurry are improved to a great extent compared to those of plain reinforcing bar accordiy to increasing content of chloride ion in cement concrete.

• Economic and Environmental Geology
• /
• v.27 no.3
• /
• pp.231-236
• /
• 1994

Fluid inclusions have been studied in phenocryst quartz from the Cretaceous porphyritic granite. Three main types of fluid inclusion were found: liquid-rich inclusion (I type), gas-rich inclusion (II type) and solid-bearing inclusions (III-A, III-B). The solid-bearing inclusions (III-A, B) represent the earliest trapped fluids. They have salinities between 63 and 67.5 wt.% equivalent NaCl. These are high saline inclusions containing NaCl and KCl daughter crystals. Homogenization temperature inferred from the fluid inclusion study ranges from 620 to $700^{\circ}C$. Type I and II inclusions were observed within the same fracture. This cause for these differences in degree of filling is evidence of boiling. Salinities of type I and II inclusions range from 10.24 wt.% to 13.44 wt.%, from 8.4 wt.% to 11.48 wt.% NaCl equivalent, respectively.

• Bulletin of the Korean Chemical Society
• /
• v.32 no.9
• /
• pp.3448-3452
• /
• 2011

Solvent-free reduction of various aldoximes and ketoximes to the corresponding amines was performed easily and efficiently with $NaBH_4$ in the presence of $ZrCl_4$ supported on $Al_2O_3$. The reactions were carried out rapidly (within 2 min) at room temperature to afford the amines in high to excellent yields.

• Journal of Plant Biology
• /
• v.23 no.1
• /
• pp.27-33
• /
• 1980

The germination character and the salt tolerance of seeds collected in a salt reclaimed area were studied. Twenty species of seeds out of 30 species collected were germinated under natural or continuous light conditions but only 16 species under dark condition. Germination percentage of seeds under dark was more decreased than those under other two conditions and speed of germination was accelerated at high temperature. It is clear that almost all the wild weeds were the light germinated seeds. The higher concentration of NaCl for germination inhibited to make the lower percentage and rate of germination. The germination curves of seeds treated with NaCl solution were classified into 3 different curves; a steeper, a parabola and intermediate. The critical concentrations of NaCl for germination were 2.3% for Brassica napus, 1.8% for Echinochloa hispidula, 1.5% for Setaria lutescens, 1.3% for Aster koraiensis, 0.7% for Bromus japonicus and 0.6% for Glyceria acutiflora.

• Journal of the Korean Ceramic Society
• /
• v.42 no.7 s.278
• /
• pp.503-508
• /
• 2005

A simple and effective method for the synthesis of LiMn$_{2}$O$_{4}$ powder as a cathode material for lithium secondary battery is reported. Micrometer size LiMn$_{2}$O$_{4}$ was prepared by combustion synthesis technique employing initial mixture of l.l LiNO$_{3}$ -1.3Mn-0.7MnO$_{2}$-1NaCl composition. Parametric study of the combustion process including molar ratio of Mn/MnO$_{2}$ and NaCl concentration were carried out under air atmosphere. The combustion products obtained were additionally heat treated at the temperature 900$^{\circ}C$ and the washed by distilled water. The results of charging-discharging characteristics revealed that LiMn$_{2}$O$_{4}$ cell synthesized in the presence of NaCl had a high capacity and much better reversibility than one formed without NaCl An approximate chemical mechanism for LiMn$_{2}$O$_{4}$ formation is proposed.

• Korean journal of food and cookery science
• /
• v.6 no.4 s.13
• /
• pp.9-14
• /
• 1990

The emlsifying properties of small red bean protein isoates were evaluated through their emulsion capacity and stability of the resulting emulsions. The influence of pH, Sodium Chloride and heat treatment on the efficiency of small red bean protein isolates as emulsifying agents was studied. The surface hydrophobicity (So) of small red bean protein islates also examined. The results were obtained as follows; 1. The emusion capacity of small red bean protein isolates was high at pH 11, low at pH 3 and decreased by heat treament. With addition of NaCl, emulsion capacity decreased steadily and showed lowest value when 0.2M NaCl was added. 2. The emulsion stability at pH 4.5 and heat treatment over $60^{\circ}C$ decreased emulsion stability at pH 4.5. When NaCl was added, emulsion stability was generally increased. 3. The surface hydrophobicity of small red bean protein isolates showed the highest value at pH 3 and lowest at pH 11 and increased as the heating temperature increased When 0.2 M NaCl was added, surface hydrophobicity also increased at pH 4.5.

• Corrosion Science and Technology
• /
• v.10 no.5
• /
• pp.180-188
• /
• 2011

In the present study, denting corrosion experiments were performed as a function of crevice gap size (50, 100 and 200 ${\mu}m$) in a solution containing 3,500 ppm NaCl + 0.2 M $CuCl_2$ (pH = 3 adjusted by HCl). The effects of chloride ion concentrations (3, 3,500 and 35,000 ppm as NaCl) were also outlined with two different crevice gap sizes (100, 200 ${\mu}m$). In addition, the effect of NiB on the denting corrosion was also investigated in a solution of 35,000 ppm NaCl + 0.2 M $CuCl_2$ (pH = 3 adjusted by HCl). The results showed that denting rate increased with the increasing crevice gap size at an initial stage and became nearly constant afterwards. As the concentration of chloride ion increased, the denting rate also increased. However, the addition of a NiB powder of 4 g/L in to the acid-chloride solution was observed to suppress the denting rate significantly.

• Applied Biological Chemistry
• /
• v.34 no.4
• /
• pp.307-311
• /
• 1991

A moderate halophile, ES 10 which produces a high level of alkaline protease was isolated from the salted anchovies and indentified as a strain of Halomonas sp. The optimum growth of the Halomonas sp. was revealed in the presence of 2 M NaCl and its growth rate in the Temporary Synthetic Medium was increased by adding DL-alanine, but inhibited by adding L-proline. The concentration of $Na^+$, $K^+$ and $Mg^{2+}$ in the cell mass of the Halomonas sp. ES 10 was 5-, 25- and 35-fold higher by dry weight basis, respectively than those of B. subtilis or E. coli. Norberg and Hofsten medium with 1 M NaCl was selected as the best medium for producing high level of alkaline protease. The optimum temperature for the growth and protease production was equally $20^{\circ}C$.