• Proceedings of the Materials Research Society of Korea Conference
• /
• 2003.11a
• /
• pp.101-101
• /
• 2003

• Resources Recycling
• /
• v.27 no.5
• /
• pp.23-29
• /
• 2018

Generally $NiSO_4$ and $NiCl_2$ were used as raw materials for producing nickel carbonate. In the case of the produced nickel carbonate, $Na_2SO_4$ and NaCl are generated on the surface and inside of the nickel carbonate to decrease the purity of the nickel carbonate. High purity nickel carbonate can be produced according to the degree of removal of such impurities. In this study, $NiCl_2$ produced by nickel MHP solvent extraction process was used to study the production of nickel carbonate. High purity nickel carbonate was prepared by the conditions according to the nickel salt and carbonate equivalence ratio, the reduction of Na and Cl in nickel carbonate according to the washing of nickel carbonate, and the reduction of Na and Cl according to the washing water temperature.

• Korean Chemical Engineering Research
• /
• v.56 no.4
• /
• pp.555-560
• /
• 2018

The high temperature stability of a chloride mixture, $NaCl-KCl-ZnCl_2$ (NaKZn-Chloride), is investigated to evaluate its potential as a thermal storage material. A thermal storage media should maintain a stable thermal properties within the temperature range of heat storage. Results from an a priori experiment showed that the NaKZn-chloride is stable only up the much lower temperature, while its stability limit is reported to be $850^{\circ}C$ in the literature. This study aims to investigate if the thermal property is changed by the moisture absorbed in the heat storage material. The effect of moisture content on the thermal properties was measured. The results show that the melting point remains the same regardless of the amount of moisture absorbed. Meanwhile, the high temperature stability is lower for the moisture treated samples. The results of this work infer that the loss of a hygroscopic thermal storage media can be reduced by avoiding its contacts to moisture in designing high temperature thermal storage systems.

• Microbiology and Biotechnology Letters
• /
• v.22 no.2
• /
• pp.175-181
• /
• 1994

A bacterial strain producing highly viscous polysaccharide(A29 POL) was isolated from soil and identified sa Bacillus sp. A29. The cultural conditions of the Bacillus sp. A29 for the polysaccharide prouction were dextrin 12%, soytone 0.2%, SnCl$_{2}$ $\cdot $2H$_{2}$O 0.02%, Na$_{2}$HPO$_{4}$ $\CDOT $12H$_{2}$O 0.36%, L-alanine 0.01%, initial pH6.8, and 30$\circ $C at pH 3 FOR 4 days. Final viscosity of the culture broth was 65, 000 cp and then the amount of produced polysaccharide was 8.3 g/l. A29 POL was composed of glucose and xylose. A29 POL showed high viscosity at low concentration(0.1%) and in the presence of the salts such as NaCl or CaCl$_{2}$. A29 POL showed high viscosity acid condition and at alkali condition and high pseudoplasticity in the presence of a NaCl or CaCl$_{2}$. It was shown that the viscosity at high temperature(80$\circ $C) was decreased but it was recovered at low temperature (20$\circ $C. A29 POL was able to from film and gel in the presence of MgSO$_{4}$ $\CDOT $7H$_{2}$O, Na$_{2}$CO$_{3}$ \CDOT $H$_{2}$O, MnSO$_{4}$ $\CDOT $ 7H$_{2}$O. A29 POL had anionic charge.

• Tribology and Lubricants
• /
• v.20 no.2
• /
• pp.91-96
• /
• 2004

Wear behavior of self-mated stainless steels in NaCl solution has been investigated. The experiment was done in the corrosive liquid of which NaCl concentration of $0\~3\%$ and temperature of $15\~90^{\circ}C$. Two kinds of wear type were observed: one is 'severe wear' type which shows gradually increasing wear volume with increasing sliding distances, the other is 'mild wear' type which shows change of wear rate from high value to low at transition distance. The specific wear rate in severe wear type was not sensitive to the liquid temperature and concentration of NaCl but stable at value of $1\times10^{-3}\;mm^3$ approximately.

• The Journal of Korean Medicine
• /
• v.23 no.2
• /
• pp.139-150
• /
• 2002

OBJECTIVES : Schizandra chinensis is well known for its efficacy at liver function reinforcement, relieving thirst and recovery from fatigue. In this study, we examined the effects of sports drink containing Schizandra chinensis on serum metabolic substrate, electrolyte, stress indicators, related-enzyme and exercise performance, rectal temperature, and heat shock proteinb70 (HSP70). METHODS : Elite long-distance runners (male, 21.3yrs, n=16) were selected and divided into two groups; an experimental group (EXP, n=8) and a control group (CON, n=8). A beverage containing Schizandra chinensis was supplemented 3 times per day to EXP for 4 weeks. Serum biochemical elements (glucose, lactate, total cholesterol, triglyceride, high density lipoprotein cholesterol, glutamate oxaloacetate transaminase, glutamate pyruvate transaminase, creatinine, creatine phosphokinase, lactate dehydrogenase, blood urea nitrogen, Na, K, Cl) were analyzed by auto blood analyzer. Exercise performance was measured by treadmill exercise test, HSP70 was detected by electrophoresis and Western blotting, and rectal temperature was measured by rectal temperature probe. RESULTS : Administration of the beverage increased significantly the rest level of blood Na, Cl and glucose and decreased significantly lactate dehydrogenase, glutamate oxaloacetate transaminase. No difference was found in exercise performance, rectal temperature increment or HSP70 concentration between groups. CONCLUSIONS : Administration of a sports drink containing Schizandra chinensis altered blood glucose, lactate dehydrogenase, glutamate oxaloacetate transaminase, Na and Cl levels.

• Korean Journal of Food Science and Technology
• /
• v.36 no.3
• /
• pp.456-460
• /
• 2004

Effects of sigma factor (${\sigma}^{B}$) on biofilm formation in Listeria monocytogenes 10403S and ${\sigma}^{B}-deficient$ sigB null mutant were studied under high osmotic and low temperature conditions. In brain heart infusion (BHI) medium containing 6% NaCl, wild type 10403S and ${\sigma}^{B}-deficient$sigB null mutant formed biofilms of $6.83{\pm}0.38\;and\;5.33{\pm}0.45\;log\;cfu/cm^{2}$, respectively. L. monocytogenes 10403S in BHI medium containing 6% NaCl formed 4.7 times larger biofilm than without NaCl. Culture of L. monocytogenes 10403S and sigB null mutant at $4^{\circ}C$ did not show any significant differences in biofilm formation. The results suggest biofilm formation is activated by ${\sigma}^{B}$ and NaCl, whereas not affected by low temperature stress in L. monocytogenes 10403S. More studies are necessary to determine biofilm formation mechanism in osmotolerant L. monocytogenes.

• Journal of the Korea Organic Resources Recycling Association
• /
• v.14 no.2
• /
• pp.83-90
• /
• 2006

The NaCl contents of food waste composts made by various techniques known up to now were under the level of 1% by fresh weight basis. But these techniques has some problem that is environment pollution from treated water and high equipment cost. The application to agricultural land of food waste compost that is not sufficiently removed NaCl was considered to be improper due to salt accumulation in soils and plant growth inhibition by salt stress. The purpose of this study is to decompose NaCl in food waste compost using triple salt and this method is differ from existing chemical method. Also, reaction of NaCl with triple salt produced KCl that is basic material of potassium fertilizer. Moreover Also, there was temperature rise of average $5^{\circ}C$ as result that apply triple salt in food waste 600 ton in food wast composting productive capacity. Obvious odious smell reduction effect appeared pretreatment process and fermentation process with temperature rise and this is because triple salt activation of aerobe and removes odious smell cause material by salt content decrease effectively.

• Macromolecular Research
• /
• v.17 no.12
• /
• pp.1015-1020
• /
• 2009

The role of the water structure present in hydrogels from nutlets of three species of salvias, S. miltiorrhiza (SM), S. sclarea (SS) and S. viridis (SV), was analyzed by differential scanning calorimetry (DSC). The sharp endothermic peaks that appeared at $5.9^{\circ}C$ (SM), $2.8^{\circ}C$ DC (SS) and $1.8^{\circ}C$ (SV) in each 1.0% hydrogel of 10.4-15.8% were not affected by addition of 0.1 M urea and alkali-metal salts. The order-disorder portions in the network were slightly affected by the distribution of freezable and non-freezable water in the hydrogel networks. The SV hydrogel was further used to investigate the effects of additives (0.1-8.0 M urea and 0.1-5.0 M NaCl) on its melting behavior. At 0.5-4.0 M urea and 1.0-3.0 M NaCl, two endothermic peaks appeared, corresponding to unbound (high temperature) and bound (low temperature) water in the gel networks, and eventually merged into one endothermic peak at 5.0-8.0 M urea and 4.0-4.5 M NaCl. After this merger, the endothermic peak shifted to 3.7, 4.0 and $5.6^{\circ}C$ at 5.0, 6.0 and 8.0 M urea, respectively. In the case of NaCl, a combination of peaks that occurred at 4.0-4.5 M were accompanied by a shift to lower temperature (-14.4 and $15.3^{\circ}C$) and the endothermic peak finally disappeared at 5.0 M NaCl due to the strong binding of water in the gel networks.

• Korean Journal of Materials Research
• /
• v.22 no.5
• /
• pp.243-248
• /
• 2012

ZrN nanoparticles were prepared by an exothermic reduction of $ZrCl_4$ with $NaN_3$ in the presence of NaCl flux in a nitrogen atmosphere. Using a solid-state combustion approach, we have demonstrated that the zirconium nitride nanoparticles synthesis process can be completed in only several minutes compared with a few hours for previous synthesis approaches. The chemistry of the combustion process is not complex and is based on a metathesis reaction between $ZrCl_4$ and $NaN_3$. Because of the low melting and boiling points of the raw materials it was possible to synthesize the ZrN phase at low combustion temperatures. It was shown that the combustion temperature and the size of the particles can be readily controlled by tuning the concentration of the NaCl flux. The results show that an increase in the NaCl concentration (from 2 to 13 M) results in a temperature decrease from 1280 to $750^{\circ}C$. ZrN nanoparticles have a high surface area (50-70 $m^2/g$), narrow pore size distribution, and nano-particle size between 10 and 30 nm. The activation energy, which can be extracted from the experimental combustion temperature data, is: E = 20 kcal/mol. The method reported here is self-sustaining, rapid, and can be scaled up for a large scale production of a transition metal nitride nanoparticle system (TiN, TaN, HfN, etc.) with suitable halide salts and alkali metal azide.