• 수산해양기술연구
• /
• 제50권3호
• /
• pp.274-283
• /
• 2014

Swelling of the heat-treated netting for gillnet was estimated through the netting height in square acrylic tank. Experimental Nylon netting and PBSAT netting were heat-treated by using the high-degree vacuum method in hot water after net making. Heat-treatment temperatures were conducted with Nylon netting $105^{\circ}C$ and PBSAT netting $62^{\circ}C$, $65^{\circ}C$, $66^{\circ}C$, $67^{\circ}C$. The swelling measurement method of a netting using the square tank was capable of the reduction measurement errors comparing with measurement methods of a mesh inner angle and the shortening rate of a mesh size. In addition, this method was available to comparison evaluation for each netting more easily. Wet type heat-treatment apparatus with high-degree vacuum was shown higher $7{\sim}8^{\circ}C$ inner side temperature than a setting temperature. The tensile strength and elongation of Nylon netting and PBSAT netting were shown higher wet condition than dry condition. The tensile strengths of PBSAT monofilaments in dry and wet condition were sharply decreased at heat-treatment temp. $75^{\circ}C$ than heat-treatment temp. $74^{\circ}C$.

• 전기전자학회논문지
• /
• 제22권1호
• /
• pp.193-196
• /
• 2018

In this study, we investigated the reliability of anisotropic conductive paste (ACP) and anisotropic conductive films (ACF), which are anisotropic conductive adhesives, applied to automotive touch panels. Adhesive material is also important as a key factor in assembling the touch panel. In order to measure the resistance change of the parts in two kinds of high temperature test, the reliability of the two types of anisotropic conductive adhesives was compared and evaluated through the results of the resistance change. For 615 hours of reliability testing, the anisotropic conductive film exhibited a higher stability in a high temperature environment than the anisotropic conductive paste.

• 대한원격탐사학회:학술대회논문집
• /
• 대한원격탐사학회 2002년도 Proceedings of International Symposium on Remote Sensing
• /
• pp.530-535
• /
• 2002

An approach for quickly updating GIS building data using high resolution remotely sensed data is proposed in this paper. High resolution remotely sensed data could be aerial photographs, satellite images and airborne laser scanning data. Data from different types of sensors are integrated in building extraction. Based on the extracted buildings and the outdated GIS database, the change-detection-template can be automatically created. Then, GIS building data can be fast updated by semiautomatically processing the change-detection-temp late. It is demonstrated that this approach is quick, effective and applicable.

• 한국안전학회지
• /
• 제15권2호
• /
• pp.8-12
• /
• 2000

The fatigue crack propagation tests were performed in triangular and holding-time stress waveforms at $650^{\circ}C$. The behavior of fatigue crack propagation was investigated according to waveform. The analysis of high temperature fatigue crack propagation by the stress intensity factor range ${\Delta}K$, elastic fracture mechanics parameter, was not available. The behaviors of high temperature fatigue crack propagation by the J-integral(${\Delta}J_f$, J' and ${\Delta}J_c$), elasto-plastic fracture mechanics parameter, were investigated in a number of stress waveforms. The fast-fast waveform exhibited cycle-dependent(fatigue type), the slow-fast and the hold time with 500sec waveforms appear to be time-dependent(creep type) and the fast-slow and the hold time with 5, 25sec waveforms exhibited conbined behavior of both types(fatigue-creep conbined type).

• 한국전기전자재료학회논문지
• /
• 제15권4호
• /
• pp.289-300
• /
• 2002

In this study, the experiments are carried out by boron ion implantation at energies ranging from 700keV to 2MeV in silicon. The distribution of boron profiles are measured by SIMS(Cameca 6f). Boron dopants profiles after high temp]erasure annealing are also explained by comparisons of experimental and simulated data. A new electronic stopping model for Monte Carlo simulation of high energy implantation is presented. Also the comparisons of profiles by profiles boron ion implantations are demonstrated and interpreted with theoretical models. Finally range moments of SIMS and SRP profiles are calculated and compared with simulation results.

• 한국식품과학회지
• /
• 제30권5호
• /
• pp.1024-1028
• /
• 1998

압출성형 방법에 의하여 고아밀로즈 옥수수전분으로부터 제조된 난소화성 전분의 분자구조적 특징을 규명하기 위하여 X-ray 회절 실험과 $^{13}C\;NMR$ 분석을 시도하였다. X-ray를 이용한 전분구조분석에서 전분의 결정 구조 비율은 압출성형시 낮은 바렐온도 $(100^{\circ}C)$에서는 원료투입 수분함량 증가시$(25{\sim}45%)$ 6.08%에서 8.37%로 약간 증가하는 경향을 보였으며, 시료간의 큰 차이는 보이지 않았다. X-ray pattern에서 $Peak\;2{\theta}$ 비교시 고 아밀로즈 압출성형물이 투입원료 수분함량이 감소하고$(45\;{\rightarrow}\;25%)$, 바렐온도가 상승하면$(120\;{\rightarrow}\;140^{\circ}C)$ 결정격자 간격 d가 작은 조밀한 결정구조가 붕괴되고 d가 증가한 느슨한 결정구조로 변형됨을 알 수 있다. $4^{\circ}C$ 저장중 압출성형된 고아밀로즈 옥수수 전분 결정 비율은 4주 저장 후에$(6.3{\sim}8.3%)$에서$(4.5{\sim}5.8%)$로 약간 감소되는 결과를 나타내었다. $^{13}C\;NMR$ 실험을 통한 이중나선 구조 비율은 바렐온도 상승시, 투입원료 수분함량이 적을수록 그 비율이 60%에서 42.5%로 감소되었고 저장 중에는 큰 변화를 보이지 않았다. 전보에서 발표한 pancreatin에 의한 난소화성 전분 수율과 비교해 보면, 이중 나선구조 구성 비율은 저장전에는 서로 상관관계가 있어 보이나 저장중 변화에서는 서로 연관성을 나타내지 않았다. 즉, 저장중 난소화성 전분수율의 증가는 X-ray 분석에 의한 상대적 결정성화가 약간 감소하면서 이중나선구조 비율에는 변화가 없는 특징적 분자구조 변형에 의한 것이라 사료된다.

• 한국약용작물학회지
• /
• 제4권4호
• /
• pp.294-300
• /
• 1996

수력발전(水力發電)을 위해 배출되는 소양강댐의 냉수(冷水)를 이용한 고추냉이 재배가능성 확인과 적지 선정을 위한 기초자료를 얻고자 강원도 춘천시 소양댐 하류 하천주변과 수원지방에서 1994년 11월 10일부터 1996년 6월까지 약 19개월동안 고추냉이 품종 달마종을 공시하여 재배지의 생육환경과 생육특성 및 수량성, 건물분배율등을 시험한 결과는 다음과 같다. 1. 소양댐의 수질은 수원지방의 지하수보다 인산을 제외한 무기성분함량이 적었으며 용존 산소량과 전기전도도(電氣傳導度)는 재배에 적합한 범위에 있었으나, 수원지방의 지하수는 전기 전도도가 0.45mm hos/cm로 재배 한계치를 넘었으며 용존산소량이 크게 부족하였다. 2. 수원의 지하수는 $15.2^{\circ}C$로 비교적 균일한데 비해 소양댐의 물은 연평균 수온이 $10.1^{\circ}C$로 계절별 수온의 진폭이 매우컸으며 생육범위의 수온인 $8{\sim}18^{\circ}C$ 사이에 속한 달은 $5{\sim}11$월이였고 생육억제 수온인 $6^{\circ}C$이하의 달은 $1{\sim}3$월이었다. 3. 소양댐의 냉수를 이용하는 경우 육모기간을 포함한 32개월재배로 개체당 주경(主莖)의 근경중(根莖重) 63g이 생산 되었고 상품율(商品率) 80%였으나, 수원지방의 지하수를 이용한 경우 주경(主莖)의 근경중(根莖重) 22g으로 수량(收量)이 극히 적고 상품률(商品率)이 0%였다. 4. 춘천의 소양댐 물을 이용한 경우 수량성은 주근경중(主根莖重) 1099kg/10a, 얼자근경중(蘖子根莖重) 1830kg/10a, 뿌리 1038kg/10a, 엽병(葉柄) 8086kg/10a이었으며 수원의 지하수를 이용하는 경우 주근경중(主根莖重) 343kg/10a, 얼자근경중(蘖子根莖重) 726kg/10a, 뿌리 220kg/10a, 엽병(葉柄) 437kg/10a이었다. 5. 춘천지방에서는 지상부 생육이 왕성하여 엽병중(葉柄重)의 건물분배율(乾物分配率)이 가장 높았으나 수원지방에서는 가장 낮았으며 얼자(蘖子) 발생이 심하여 전한근경중(全根莖重)에서 주한경중(主恨莖重)이 차지하는 비율이 매우 낮았다. 6. 춘천지방의 경우 주근경중(主根莖重)은 초장, 생체중과 유의한 정의상관을 보였고 얼자수(蘖子數)와 부의상관을 보였으며 수원지방의 경우 주한경중(主根莖重)은 근중(根重)과 유의한 정상관을, 전엽수(全葉數), 얼자수와 고도의 유의한 정상관을 보였다.

• 한국복합재료학회:학술대회논문집
• /
• 한국복합재료학회 2002년도 추계학술발표대회 논문집
• /
• pp.193-197
• /
• 2002

Polyurethane casting wing fairings included in F-5E/F 15% spar kit are to be installed on aircraft wing surfaces and used for compensating the changes of the aerodynamic configuration by the leading edge extension fairings. These fairing are mandatory items in repairing wing areas and was imported from foreign supplier with long term delivery and high cost. Accordingly, local manufacturing is necessary to get rid of above disadvantages such as long term delivery and high cost. Basic properties test of specimen to be developed and part's requirements after localization was taken and its values were similar or higher when comparing with the original's even in low temp test at -55C. Casting mold process was used to manufacture the polyurethane fairings and its demensional stability ＆ physical condition was proper and met to the related specification and drawing's requirements

• 한국공작기계학회:학술대회논문집
• /
• 한국공작기계학회 1999년도 추계학술대회 논문집 - 한국공작기계학회
• /
• pp.530-535
• /
• 1999

In recently, annealing process of cold rolled sheet tend to change to continuous annealing process for improving quality, saving yield. In the meantime as demand for various kind and small lot of products has been increasing, batch annealing has been appreciated for its small restriction for the operation. So, we tested on the effect for the proper heating temperatures, heating time of cycle, cooling time and total cycle time in this annealing process of hi tensile strength steel for automobile. As a result of several investigation. we confirmed for the following characteristics; In this process, we knew that 68$0^{\circ}C$ is suitable for this heating temp. cycle heating time of 38 Hr, cooling time of 31 Hr and total cycle time of 70 Hr. Still more, we could know that it is proper for cold rolling before annealing to be managed by 7 pass because of the act on high pressure.

• Journal of Pharmaceutical Investigation
• /
• 제26권3호
• /
• pp.221-232
• /
• 1996

An abrasive, calcium hydrogen phosphate dihydrate (DCPD), was synthesized in a Box-wilson experimental design by reactions between phosphoric acid and milk of lime, and calcium chloride and sodium phosphate solutions, and stabilized with TSPP and TMP. The optimum conditions for preparation of DCPD from phosphoric acid with milk of lime were such as; reaction temp.; $51.9^{\circ}C$, conc. of lime; 25.9%, conc. of phosphoric acd; 77.9%, drying temp.; $60.2^{\circ}C$ and final pH; 6.46. The physico-chemical and pharmaceutical properties of DCPD were showed as follows: glycerin absorption value(68 ml/100g), whiteness(99.5%), particle size(10.9 nm), pH(7.8), and set test(pass). XRD and SEM of DCPD indicated a monoclinic system crystallographically. $N_2$ adsorption isotherm curve by BET showed non porous type II form. The micromeritic parameters of DCPD showed that surface area was $3.27{\sim}4.6\;cm^{2}/g$ and pore volume, pore area and pore radius were negligible. The rheogram of the toothpaste containing DCPD showed pseudoplastic flow with yield value of 321, and thixotropic behavior forming hysteresis loop. These results meet the requirements as abrasive standard, and sythesized DCPD is expected as a good dental abrasive such as a high quality grade in practice.