• The Journal of the Korea Contents Association
• /
• v.8 no.3
• /
• pp.156-172
• /
• 2008

The point of departure is the Popularity of the electronic games among the youth generation. This study attempts to make up a questionnaire containing the questions which are intended for the youth generation realistically and at the same time in a meaningful way pedagogically. Any researcher who wants to understand the youth culture at the present time is necessary to approach the youth generation in a positive attitude of learning, so asking the questions to the youth generation is as important as having the answers. That is to say, this paper is not a statistical analysis of the questionnaire, nor a empirical research of youth's reception of the electronic games. Now that the emphasis of the paper is located on the very way of approaching the youth generation concerning the electronic games, this study starts with the university students in the first place because they are in a more advantageous milieu for conversation in the classroom on the subject. To be sure, this study will be able to cover the whole area of primary, junior or senior high-school by way of some modifications. Conclusively, this paper aims at providing with practical ideas of teaching, which immediately can be appropriated into the classroom by the teachers in the actual field, and drawing attention to the potential educational contents of the cultural products. Furthermore, the questionnaire proposed in the paper is meant for the first step towards the aesthetics of the electronic games with a view to the game-imagination.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2008.11a
• /
• pp.10-10
• /
• 2008

Silicide is inevitable for CMOSFETs to reduce RC delay by reducing the sheet resistance of gate and source/drain regions. Ni-silicide is a promising material which can be used for the 65nm CMOS technologies. Ni-silicide was proposed in order to make up for the weak points of Co-silicide and Ti-silicide, such as the high consumption of silicon and the line width limitation. Low resistivity NiSi can be formed at low temperature ($\sim500^{\circ}C$) with only one-step heat treat. Ni silicide also has less dependence of sheet resistance on line width and less consumption of silicon because of low resistivity NiSi phase. However, the low thermal stability of the Ni-silicide is a major problem for the post process implementation, such as metalization or ILD(inter layer dielectric) process, that is, it is crucial to prevent both the agglomeration of mono-silicide and its transformation into $NiSi_2$. To solve the thermal immune problem of Ni-silicide, various studies, such as capping layer and inter layer, have been worked. In this paper, the Ni-silicide utilizing Pd stacked layer (Pd/Ni/TiN) was studied for highly thermal immune nano-scale CMOSFETs technology. The proposed structure was compared with NiITiN structure and showed much better thermal stability than Ni/TiN.

• BMB Reports
• /
• v.40 no.6
• /
• pp.861-869
• /
• 2007

The enzyme 3-hydroxy-3-methylglutaryl-CoA reductase (HMGR; EC1.1.1.34) catalyzes the first committed step of isoprenoids biosynthesis in MVA pathway. Here we report for the first time the cloning and characterization of a full-length cDNA encoding HMGR (designated as CgHMGR, GenBank accession number EF206343) from hazel (Corylus avellana L. Gasaway), a taxol-producing plant species. The full-length cDNA of CgHMGR was 2064 bp containing a 1704-bp ORF encoding 567 amino acids. Bioinformatic analyses revealed that the deduced CgHMGR had extensive homology with other plant HMGRs and contained two transmembrane domains and a catalytic domain. The predicted 3-D model of CgHMGR had a typical spatial structure of HMGRs. Southern blot analysis indicated that CgHMGR belonged to a small gene family. Expression analysis revealed that CgHMGR expressed high in roots, and low in leaves and stems, and the expression of CgHMGR could be up-regulated by methyl jasmonate (MeJA). The functional color assay in Escherichia coli showed that CgHMGR could accelerate the biosynthesis of $\beta$-carotene, indicating that CgHMGR encoded a functional protein. The cloning, characterization and functional analysis of CgHMGR gene will enable us to further understand the role of CgHMGR involved in taxol biosynthetic pathway in C. avellana at molecular level.

• Molecules and Cells
• /
• v.26 no.6
• /
• pp.536-547
• /
• 2008

Anthocyanidin synthase (ANS, leucoanthocyanidin oxygenase), a 2-oxoglutarate iron-dependent oxygenase, catalyzed the penultimate step in the biosynthesis of the anthocyanin class of flavonoids, from the colorless leucoanthocyanidins to the colored anthocyanidins. The full-length cDNA and genomic DNA sequences of ANS gene (designated as GbANS) were isolated from Ginkgo biloba for the first time. The full-length cDNA of GbANS contained a 1062-bp open reading frame (ORF) encoding a 354-amino-acid protein. The genomic DNA analysis showed that GbANS gene had three exons and two introns. The deduced GbANS protein showed high identities to other plant ANSs. The conserved amino acids (H-X-D) ligating ferrous iron and residues (R-X-S) participating in 2-oxoglutarate binding were found in GbANS at the similar positions like other ANSs. Southern blot analysis indicated that GbANS belonged to a multi-gene family. The expression analysis by real-time PCR showed that GbANS expressed in a tissue-specific manner in G. biloba. GbANS was also found to be up-regulated by all of the six tested abiotic stresses, UV-B, abscisic acid, sucrose, salicylic acid, cold and ethylene, consistent with the promoter region analysis of GbANS. The recombinant protein was successfully expressed in E. coli strain with pET-28a vector. The in vitro enzyme activity assay by HPLC indicated that recombinant GbANS protein could catalyze the formation the cyanidin from leucocyanidin and conversion of dihydroquercetin to quercetin, suggesting GbANS is a bifunctional enzyme within the anthocyanidin and flavonol biosynthetic pathway.

• Journal of Life Science
• /
• v.19 no.10
• /
• pp.1368-1373
• /
• 2009

The purpose of this study was to assess the influence of waist size on the reliability and validity of pedometers to count steps in children and youth. The participants for this study were 20 children and youth, composed of 14 Hispanic and 6 Caucasian children. Ten children and youth had waist circumferences greater than the $85^{th}$ percentile (Body Mass Index (BMI)=$28.91\pm3.07$), and 10 children and youth had waist circumferences smaller than the $50^{th}$ percentile (BMI=$18.05\pm1.55$). To examine pedometer reliability, each child completed 3 ascent and descent trials up a set of 15 stairs while wearing a Yamax SW-701 pedometer. The main effect of trials was not statistically significant for the stair ascent trials F (2, 36)=2.575 or for the descent trials F (2, 36)=0.235. The trial by group interaction was also not statistically significant. To examine the influence of waist circumference on the validity of the pedometer in counting walking steps at a self-selected walking pace, the children and youth in the two groups completed a 400-m course. The main effect on the groups was statistically significant, F (1, 18)=7.489. The main effect of counting techniques was not statistically significant, F (1, 18)=2.983 (hand-counted vs. pedometer counted). Overall, the trial and trial by group interaction comparisons for the 400-m walk were not statistically significant, suggesting that the pedometer was equally valid as a tool for assessing walking steps in high waist circumference (HWC) and low waist circumference (LWC) in children and youth.

• Fire Science and Engineering
• /
• v.25 no.3
• /
• pp.78-84
• /
• 2011

In this study, we have measured the charring rate of solid sawn timber as a preceding step for develop performance based fire safety design method of wood framed building structures. The follows are the summary of fire test results carried out with $400{\times}400$ mm cross-section Douglas-fir in varied of thickness and grain directions. I) When the timber thickness increase under same dimension, the charring rate decreases gradually. It is seemed the charring layer up on a thickness roles as a insulation, gives combustion delaying time to specimen. 2) The charring rates measured at different depths (10, 20, 30, 40 mm) in timber which varying thickness (20, 40, 80, 120 mm) when exposed maximum 1 hour standard fire increase by 30 mm depth, but decrease at 40 mm. It is seemed the minimum charr layer should be 30 mm for having role of insulation. 3) The charring rate of cross section surface (direction of perpendicular to grain) was more high than that of grain direction. It can be explained by the cracks and gaps from greater charr contraction made more heat flux incident into timber.

• The KIPS Transactions:PartD
• /
• v.13D no.4 s.107
• /
• pp.557-564
• /
• 2006

Information is used effectively and contributes in profit creation and not only support management judgment quick but important resource to be possible recycled. The recent information systems improve enterprise's competitive power by reflection of user's various requirements and becoming big and complex for adaptation of rapidly circumstance change. Also it is trend that importance of information quality is emphasized gradually. The biggest problem in user requirement that is based on low quality data support. In case of business management is achieved by low quality information, company can not help dropping their competitive power such as company's strategy establishment, strategy achievement and management concentration breakup against competitor. Information of low quality increase time and expense to improve inaccurate data or revise and it is hard to accept correct information from specific situation. To solve these problems, we have to gain high quality data through definite comprehension, data management system establishment, and systematic data management achievement etc. Up to now, information quality and connected study were developed partially, but systematic methodology of information quality management's whole condition was not existed. Therefore, in this paper can show you how to extract process for information quality management & related evaluate factor with CMM (Capacity Maturity Mode]) 5 steps that is information warranty of quality process step. This paper whishes to contributes in competitive company or organization activity through information quality improvement management process.

• Journal of Distribution Science
• /
• v.14 no.6
• /
• pp.107-118
• /
• 2016

Purpose - Over 90% of Domestic logistics industry is small enterprise and they are experiencing growth stagnation due to price-based competition structure rather than constructing logistics service of high added value. In order to get over this situation and pursue the development of logistics industry, strengthening its competitiveness, through inter-enterprise cooperative network build-up, would be a key alternative. Therefore, in this study, an index for measuring inter-enterprise cooperation level of Joint logistics business will be developed as a typical collaborative business model in logistics industry. Moreover, a strengthening competitiveness method suggests a developmental step and a key management index to mature in logistics industry. Research Design, Data, Methodology - This study is an index development research for measuring inter-enterprise cooperation level of logistics industry. Such a level was measured by performing a survey by targeting enterprises that participated in Joint logistics business. The targeting enterprises are typical cooperative models in logistics industry. Measurement items were developed which were based on the presented items in existing research. Question items were composed of selection type questions as answering Yes/No. They measures implementation status of corporate activity and detailed activity items measuring qualitative level. Total samples were based on 116 enterprise samples including 90 logistics enterprises and 26 shippers. In addition, by evaluating the importance for Joint logistics business recognition with personnel working level, the weight of measuring variable was extracted. This study has built an assessment tools (LPCI) on Joint logistics business cooperation level in a situation where there are no previous studies on joint logistics business, this study is meaningful for other studies. Results - As a result of analyzing LPCI presented in this study, the score of logistics enterprise was represented as 59.9 points based on full score of 100 points and that of shippers as 47.2 points and cooperation level among enterprises participated in Joint logistics business was revealed to be very low. In particular, as a result of measuring the importance between logistics enterprise and shippers, the difference by each measurement standard was represented among those enterprises. This difference is considered to be a key factor that cooperative operational conformity between logistics enterprises and shippers is represented to be low. Conclusions - As most joint logistics business, being promoted at present, is sharing facility and information with joint logistics business, it is hard to find such a joint logistics business in reality based on cooperative business model in main cooperation agents. Therefore, competitiveness of logistics industry could be strengthened by promoting joint logistics business based on their mutual cooperation among enterprises. In other words, it is to secure sustainable competitiveness of joint logistics business together with creation of new market by inter-enterprise cooperation based on integration of basic logistics business.

• Journal of the Korean School Mathematics Society
• /
• v.16 no.1
• /
• pp.1-29
• /
• 2013

The main goal of the research is to develop instructional consulting manual to help math teachers improve classroom teaching. Improving the quality of teaching in schools is stressed as a central focus of meaningful classroom instruction and high quality education. In this research, teaching consulting was defined as an activity that covers reflection process oriented towards formative assessment and continuing professional development. Within this context, subject-specific teaching consulting and teaching professionalism with focus on PCK was reviewed. Further, the questionnaire survey was conducted to investigate the current situation of teaching consulting and teachers' needs for consulting. And also, specific examples of subject-specific consulting based on our previous consulting experiences in math classes were shown. Alternative ways to improve subject teaching were derived through the conferences where consultants and consultees analyze video-taped lessons conducted by the consultees. By those results, a manual for invigorating teaching consulting was developed. The contents of the manual consists of setting conditions of teaching consulting and its implementation in the classroom teaching. The first part of the manual contains steps to establish teaching consulting system, the qualification and role of the consultant, system evaluation, etc. The second part of the manual presents the pre-preparation, prescription and implementation and follow-up management steps. Each part of the manual provides consultants with specific guidelines for each step. Finally, recommendations for making policy related to ways to invigorate teaching consulting was suggested. It is expected that specific examples and cases of subject-specific teaching consulting presented in this research will be used to narrow the gap between theory and practice of teaching consulting, and to help math, science and English teachers develop teaching professionalism.

• Korean Journal of Remote Sensing
• /
• v.34 no.2_2
• /
• pp.407-418
• /
• 2018

The frequency and risk of disasters are increasing due to environmental and social factors. In order to respond effectively to disasters that occur unexpectedly, it is very important to quickly obtain up-to-date information about target area. It is possible to intuitively judge the situation about the area through the image-map generated at high speed, so that it can cope with disaster quickly and effectively. In this study, we propose an image-map generation and visualization system from UAV images for real-time disaster monitoring. The proposed system consists of aerial segment and ground segment. In the aerial segment, the UAV system acquires the sensory data from digital camera and GPS/IMU sensor. Communication module transmits it to the ground server in real time. In the ground segment, the transmitted sensor data are processed to generate image-maps and the image-maps are visualized on the geo-portal. We conducted experiment to check the accuracy of the image-map using the system. Check points were obtained through ground survey in the data acquisition area. When calculating the difference between adjacent image maps, the relative accuracy was 1.58 m. We confirmed the absolute accuracy of the image map for the position measured from the individual image map. It is confirmed that the map is matched to the existing map with an absolute accuracy of 0.75 m. We confirmed the processing time of each step until the visualization of the image-map. When the image-map was generated with GSD 10 cm, it took 1.67 seconds to visualize. It is expected that the proposed system can be applied to real - time monitoring for disaster response.