• 한국환경과학회지
• /
• 제19권1호
• /
• pp.9-16
• /
• 2010

This pilot study evaluated fueling feasibility of sewage sludge, which contains a large amount of water content, by applying melting of thermoplastic polyethylene (PE). This study has identified a simultaneous achievement of drying and heating value improvement of the sewage sludge. The sewage sludge collected from a sewage sludge treatment plant during a winter period had a water content of 83.7 wt%, a combustible volatile content of 12.5 wt%, and an ash content of 3.8 wt%. The higher heating value (HHV) of the dried sewage sludge, before impregnation or coating of PE, was 4,600 kcal/kg. The collected sewage sludge was immersed into the melted PE solution, which had a HHV of 11,070 kcal/kg, and kept immersing with increasing reaction time. As the reaction (immersing or coating or impregnation) time increased, the water content of the sludge decreased. However, the HHV of the sludge increased with increasing the reaction time. The HHVs of the sewage sludge immersed or dipped into the melted PE solution for 15 min ranged from 6,780 to 8,170 kcal/kg with water content less than 7 wt%. This result indicates the melted PE solution can be utilized as an improvement technology for dryness and heating value of the sewage sludge with high water content. The sewage sludge impregnated or coated with melted PE can be utilized as potential fuel or energy resources.

• 한국지반공학회논문집
• /
• 제29권2호
• /
• pp.57-64
• /
• 2013

본 논문에서는 정수슬러지의 고함수비 문제를 해결하고 재활용을 촉진하기 위해 정수슬러지와 화강풍화토를 다양한 배합비로 혼합하여 슬러지혼합토(sludge mixture)를 제작하고, 다양한 실내 시험을 통해 슬러지혼합토의 물리적 특성과 불포화 특성을 분석하였다. 시험 결과, 정수슬러지 함량이 증가함에 따라 동일한 모관흡수력에 대응하는 체적 함수비는 증가하였다. 또한 정수슬러지 함량 또는 세립분 함량이 증가함에 따라 공기함입치는 0.9kPa에서 2.4kPa로 증가하였다. 슬러지혼합토의 포화투수계수 값과 함수특성곡선의 결과를 활용하여 강우 시 침투해석을 수행하는데 있어서 중요한 인자인 불포화 투수함수를 산정하였다.

• KSBB Journal
• /
• 제13권3호
• /
• pp.279-283
• /
• 1998

To investigate the feasibility of the microbial process for removal of heavy metals from the high solid content sludge, the effect of sludge concentration on the solubilization of heavy metals by an iron oxidizing bacterium Thiolbacillus ferrooxidans was examined. With increasing the sludge concentration, the removal efficiency of heavy metals and the oxidation rate of iron were inhibited. Especially, when the sludge concentration is over 5% (w/v), the activity of T. ferrooxidans was remarkably inhibited. This inhibition is considered to occur due to the dissolved inhibitory materials such as organic compounds, heavy metals, and others which were extracted from the sludge during incubation period. In conclusion, the microbial process by T. ferrooxidans is only effectively used in ranges of 1.3 to 4.0% (w/v) sludge concentration.

• 한국물환경학회지
• /
• 제31권5호
• /
• pp.476-481
• /
• 2015

Water permeable block was manufactured using waste sewage sludge, loess and clay for the purpose of recycling waste sludge due to the prohibition of waste sludge ocean dumping. Experiments for determining optimum mixing ratio was conducted by changing sludge content in water permeable block as 5~20%. In respect of compressive strength, $1,600N/cm^2$ ($163.3kg/cm^2$) was obtained when the mixing ratio of sludge : loess : clay were maintained by 5% : 65% : 30%, 10% : 65% : 25% and 15% : 65% : 20%, respectively. These mean that relatively high compressive strength can be obtained when the sludge content is maintained 5, 10, 15% at the 65% of loess content. In terms of water permeability and absorption rate, the higher values can be obtained as the sludge content increases. The optimum mixing ratio of sludge : loess : clay came out to be 15% : 65% : 20% when water permeability, absorption and strength were considered altogether, which matches the result observed by an electron microscope. The heavy metal leaching test result of the prepared permeable block appeared to satisfy the environmental standard in the content of Cd, Cu, Pb and As.

• KSBB Journal
• /
• 제25권1호
• /
• pp.103-107
• /
• 2010

Oil degradation agent was developed with organic sludge and modified peat moss (MPM) to recover oil contaminated soil. Waste sludge discharged from wastewater treatment plant of chemical plant in Ulsan National Industrial Park was used as organic sludge, and MPM was purchased. Organic sludge was adequate to use as growth medium for microorganism, the surface of MPM had porous structure which could enhance the cultivation condition of oil degradation microorganisms. Water contents and TPH variation with time were observed to investigate the degradation capacity of developed degradation agent. Water contents were rapidly decreased with higher contents of MPM, however, in case of TPH, high MPM content decreased the degradation capacity. Therefore, it was recommended that the content of MPM was controlled to below 10% in degradation agent as mixing organic sludge with MPM.

• 한국환경농학회지
• /
• 제9권2호
• /
• pp.121-131
• /
• 1990

도시생활하수의 처리에서 생산된 물질인 sludge를 토양개량제로 토양에 처리하여 재배한 식물체중 Cd 및 Zn의 흡수 축적되는 정도를 비교분석하기 위하여, sludge를 0. 22.5, 45.0, 90.0t $ha^{-1}$ 수준으로 토양에 처리하고 쪽파, 무우, 감자, 배추 등 4종의 작물을 pot 재배하여 각 식물체 부위별 Cd 및 Zn 농도를 분석하고 토양중에서 의 이들 중금속 농도의 증가 요인과 식물체중의 Cd 및 Zn함량 증가와의 관계를 통계분석한 결과는 다음과 같다. 1. 공시작물체 중의 Cd 및 Zn 함량은 sludge 처리량이 증가할수록 증가하였다. 2. 공시작물 뿌리중의 Cd 및 Zn함량도 sludge 처리량이 증가할수록 증가하였으며 쪽파>감자>배추>무우순으로 증가하였다. 3. 작물별 잎중의 Cd 함량은 쪽파>무우>감자>배추 순으로 증가하였고 Zn 농도는 배추>감자>무우>양파 순으로 증가하였다. 4. 식물체 부위별 Cd농도가 가장 낮았던 부위는 감자의 괴경, 무우뿌리, 배추잎으로 그 범위가 0.03-0.12ppm 이었다. 5. Sludge 90.0t $ha^{-1}$ 수준으로 토양에 처리하여 재배한 식물체 중의 Cd함량은 부위에 따라 원토양에서 재배한 식물체중 함량의 1.2-10배까지 흡수축적 되었고, Zn함량은 0.4-2.3배 증가하였다 6. Sludge처리에 의한 Cd 및 Zn농도 증가에 대한 식물체 부위 중의 흡수 축적율은 쪽파의 뿌리에서 Cd의 경우를 제외하고는 거의 일정하였다.

• 한국연소학회:학술대회논문집
• /
• 한국연소학회 1999년도 제19회 KOSCO SYMPOSIUM 논문집
• /
• pp.81-91
• /
• 1999

Fuel characteristics of sewage sludge as required for the fluidized bed incinerators have been evaluated. Sewage sludge is basically a solid fuel with high percentage of moisture. Moisture content of the fuel directly affects the heating value of the fuel and the exhaust gas composition. When the sludge of transported into the incinerator, sludge cake is subject to the mixing, break-up and heat-up. Fluidization process would enhance these physical processes. The sludge fuel could then undergo the moisture evaporation and devolatilization process. Subsequent oxidation of volatiles as well as the remaining char would then follow. Sludge samples are characterized with high percentage of volatiles out of total combustibles. Quantitative understanding of above listed subprocesses would certainly help in the utilization of fluidized bed incinerators. A limited set of fuel characterization tests including calorimetric analysis, proximate analysis, elemental analysis and thermogravimetric analysis were conducted for the selected sludge samples. The measurement reasults of sludge samples were reported along with some published data. Limited experience in the actual incinerator plant is also presented.

• 한국유체기계학회 논문집
• /
• 제7권2호
• /
• pp.35-40
• /
• 2004

A generation rate of sludge in Korea had increased dramatically about $200\%$ for a decade. A requirement for high efficiency dewatering system being possible to produce the low water content cake have suggested due to the appearance of commercial and social problems about handling of dewatered cake. The conventional dewatering system with mechanical compression device was not suitable to produce the low water content cake and didn't cope with lots of requirements. Therefore, this paper was to develop the high efficient filter press with the compressive and heating forces through the heating plate to be built between membrane fillet plates. It is possible to produce the low water content cake and improve the dewatering rate, so this equipment positively coped with several types of problems related to the sludge dewatering. The plate heated by heat transfer materials such as steam, hot water and thermo-oil made the sludge make the residual moisture within the cake to discharge easily and to improve the dewatering efficiency of equipment. The pilot scale experiment with 500kg of cake production showed that the dewatering efficiency determined by the final water content and dewatering velocity was improved $30\%$ more than the conventional dewatering equipment.

• 유체기계공업학회:학술대회논문집
• /
• 유체기계공업학회 2003년도 유체기계 연구개발 발표회 논문집
• /
• pp.278-283
• /
• 2003

A generation rate of sludge in Korea had increased dramatically about 200 % for a decade. A requirement for high efficiency dewatering system being possible to produce the low water content cake have suggested due to the appearanceof commercial and social problems about handling of dewatered cake. The conventional dewatering system with mechanical compression device was not suitable to produce the low water content cake and didn'tcope with lots of requirements. Therefore, this paper was to develop the high efficient filter press with the compressive and heating forces through the heating plate to be built between membrane filter plates. It is possible to produce the low water content cake and improve the dewatering rate, so this equipment positively coped with several types of problems related to the sludge dewatering. The plate heated by heat transfer materials such as steam, hot water and thermo-oil made the sludge make the residual moisture within the cake to discharge easilyand to improve the dewatering efficiency of equipment. The pilot scale experiment with 500kg of cake production showed that the dewatering efficiency determined by the final water content and dewatering velocity was improved 30% more than the conventional dewatering equipment.

• Environmental Sciences Bulletin of The Korean Environmental Sciences Society
• /
• 제4권4호
• /
• pp.215-220
• /
• 2000

This study on the incineration ash and sintering pellet from sewage sludge was carried out to evaluate the possibility of recycling in sewage sludge disposal. The samples used in this experiment were raw sewage sludge, its incineration ash, and sintering pellet. The characteristics of the three sample types were identified using X-ray diffraction(XRD), X-ray fluorescence(XRF), atomic absorption spectroscopy(AAS), and inductively coupled plasma spectroscopy(ICP). The chemical compositions of all three sample types were similar in their clay component, however, the sewage sludge had a high content of organic materials. From an analysis of the mineral content of the three sample types, the conversion of their compositions was found to be relative to temperature. Accordingly, incineration ash and sintering pellet both have potential for use as a functional construction material.