• Journal of Astronomy and Space Sciences
• /
• 제23권4호
• /
• pp.453-464
• /
• 2006

일반적으로 웹 카메라는 PC간 화상통신을 위해 많이 쓰이고 있으나, 화소수도 적고 장시간 노출촬영도 불가능하기 때문에 천문용으로 사용하기에는 어려움이 있다. 하지만 장시간 노출이 필요 없는 달이나 행성 등을 촬영하기에는 부족함이 없기 때문에 아마추어 관측자들이 행성 촬영용으로 많이 이용하고 있다. 웹 카메라 중에 CCD를 사용한 Philips사의 ToUcam Pro II를 사용하여 행성촬영을 하였고, 촬영한 동영상은 상용 프로그램인 Registax를 이용하여 합성을 하였다. 또한 웹 카메라의 기본적인 특성을 알아보기 위해, CCD의 특성 분석에 활용하는 직선성, 이득 등의 특성을 살펴보았다. 행성 촬영할 때 기존에는 필름이나 디지털 카메라, CCD로 한 장씩 찍었지만, 웹 카메라로 촬영할 경우 동영상으로 촬영하여서 중은 이미지만을 골라서 합성하기 때문에, 훨씬 더 고해상도의 행성이미지 촬영이 가능하게 되었다. 행성관측 방법과 동영상 합성 방법 등에 대해 논의하기로 한다.

• 대한방사선기술학회지:방사선기술과학
• /
• 제2권1호
• /
• pp.15-22
• /
• 1979

Author made a experiment on the exposure dose with various intensifying screens in taking chest roentgenogram and obtained the results as follows; 1. Special speed type was the most sensitive intensifying screen, the r(gamma) value of this screen was distributed from 2.6 to 2.9. 2. The resolution activity of intensifying screen was inversely proportional to its sensitivity. If, the sensitivity and detail of the fine detail speed type intensifying screen at 100 KV were 100, those of the special speed type were 549 and 54.44 respectively. 3. If the exposure dose of the fine detail type intensifying screen was 1.0 at 60 KV, that of the special speed type intensifying screen was 0.1 at 80KV, and the skin dose of patient was as follows; it was 64.8 mRad at 60KV in mid speed type, 8.1 mRad at 80KV in super high speed type, and 7.2 mRad at 80KV in special speed type intensifying screen respectively.

• 전자공학회논문지D
• /
• 제36D권10호
• /
• pp.61-70
• /
• 1999

본 논문에서는 균일한 다중 홀로그램을 얻기 위한 몇 가지 노출 시간 계획을 분석하고 실험을 통해 $LiNbO_3$:Fe(0.015wt%) 결정에 기록된 홀로그램의 회절 효율을 측정하였다. 높은 각도 분해능을 갖는 시스템 (최소 각도 : $0.0028^{\circ}$)을 이용하여 두 입사빔의 세기비와 최소 단위의 다중화 각도가 정밀하게 조사되었다. 초기 기록시간, 전체 노출시간, 그리고 시간상수를 고려하여 100개의 회절분포(0.014 ${\pm}$ 0.005%)를 측정하였으며, 330개의 아날로그 영상을 동일한 장소에 기록하였다. 또한 공간 다중화를 통해 총 500개 이상의 홀로그램이 재생되었다.

• 대한디지털의료영상학회논문지
• /
• 제12권2호
• /
• pp.127-132
• /
• 2010

In this study, the correlation among the changes of Modulation Transfer Function(MTF) in the noise and high-contrast resolution and the change of Contrast to noise ratio(CNR) in the low-contrast resolution will be examined to investigate the estimation of image quality according to the type of algorithms. The image data obtained by scanning American Association of Physicists in Medicine(AAPM) phantom was applied to each algorithm and the exposure condition of 120 kVp, 250 mAs, and then the CT number and noise were measured. The MTF curved line of the high-contrast resolution was calculated with Point Spread Function(PSF) by using the analysis program by Philips, resulting in 0.5 MTF, 0.1 MTF and 0.02 MTF respectively. The low-contrast resolution was calculated with CNR and the uniformity was measured to each algorithm. Since the measurement value for the uniformity of the equipment was below ${\pm}$ 5 HU, which is the criterion figure, it was found to belong to the normal range. As the algorithm got closer from soft to edge, the standard deviation of CT number increased, which indicates that the noise increased as well. As for MTF, 0.5 MTF, 0.1 MTF and 0.02 MTF were all sharp algorithms, and as the algorithm got closer from soft to edge, it was possible to distinguish more clearly with the naked eye. On the other hand, CNR gradually decreased, because the difference between the contrast hole CT number and the acrylic CT number was the same while the noise of hole increased.

• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 2000년도 제15차 학술회의논문집
• /
• pp.302-302
• /
• 2000

This paper presents the measurement and correction of PCB alignment errors for PCB-manufacturing machines. The conventional PCB-manufacturing machine doesn't have enough accuracy to accommodate the demand for high-resolution circuit pattern and high-density mounting capacity of electronic chips. It is because of alignment errors of PCB loaded to the PCB-manufacturing machine. Therefore, this study focuses on the development of the system which is able to measure and correct alignment errors whit high-accuracy. An automatic optical inspection part measures the PCB alignment error using two cameras, and the high-accuracy 3-axis stage makes correct of these error. The operating system is run in the environment of Window 98 (or NT). Finally we implemented this system to PCB screen printer and PCB exposure system.

• 한국콘텐츠학회논문지
• /
• 제13권8호
• /
• pp.275-283
• /
• 2013

자동노출제어장치를 사용하는 흉부 후전 검사는 이온전리조의 선택에 따라 환자가 받는 피폭선량이 달라진다. 본 논문에서는 자동노출제어장치의 이온전리조의 선택에 따른 최적의 진단 영상을 획득하면서 피폭선량을 최소화하는 방안에 대해 연구하였다. 실험방법은 흉부 후전 검사와 동일한 조건으로 자동노출제어장치의 이온전리조 선택과 감도변화에 따라 실험하였다. 이온전리조의 상단 2개, 하단 1개의 센서를 on/off 선택에 따라 7가지의 경우로 나누어 각각 5회씩 측정하여 평균값을 구하고 피폭선량을 산출하였다. 영상평가는 변조전달함수, 최대신호 대 잡음비, 평균제곱근, 신호 대 잡음비, 대조도 대 잡음비, 평균대표준편차비를 각각 측정하여 평가를 시행하였다. 실험결과 피폭선량 평가에서 이온전리조 상단 2개를 선택한 경우가 다른 조합에 비해 가장 낮은 선량을 나타내었고, 해상력 평가결과로는 감도 625(High)에서 상단2개를 선택한 영상이 두 번째로 높은 공간주파수 1.343 lp/mm를 나타내었다. 상단 2개를 선택한 영상의 평균제곱근 결과값이 두 번째로 낮게 나타났으며, 신호 대 잡음비, 대조도 대 잡음비, 평균 대 표준편차비는 두 번째로 높은 결과값을 나타내었다. 그리고 감도가 증가함에 따라 피폭선량은 감소하였으며, 영상품질 측면에서도 보다 우수한 영상을 얻을 수 있었다. 따라서 피폭선량을 최소화하고, 최적의 의료 영상을 얻기 위해서는 감도 625(High)에서 이온전리조 상단 2개를 선택하는 것이 임상적으로 유용할 것으로 사료된다.

• 한국환경보건학회지
• /
• 제37권6호
• /
• pp.440-449
• /
• 2011

Objectives: This study was designed to determine the levels of polybrominated diphenyl ethers (PBDEs) in breast milk and to evaluate the relations with factors affecting these levels. Methods: The congener levels of PBDE in 22 samples of breast milk were analyzed using a high resolution gas chromatograph with a high resolution mass detector. In accordance with our standard operating procedures, the recoveries of internal standards had to range between 68% and 118%. Since the distribution of PBDE concentrations is close to log-normal, the data were logarithmically transformed before analysis. Test subjects were healthy primipara and multipara mothers with a mean age of 32 (SD = 2.7) in 2006. Results: Seven PBDE congeners (BDE-28, 47, 99, 100, 153, 154, and 183) were detected and identified in all of the pooled breast milk samples, indicating widespread contamination from PBDEs in the environment in Korea. Residue levels of total PBDEs (sum PBDEs from tri- to hepta-BDE) ranged from 0.84-13.1 ng/g lipid with median and geometric mean levels of 2.6 ng/g lipid and 2.74 ng/g lipid, respectively. PBDE congeners 47, 99 and 153 markedly predominated and accounted for about 75% of the amount of the PBDE congeners analyzed. BDE-47 was the dominant congener in most samples, whereas BDE-153 was predominant in a few (n = 7/22). BDE-47 was highly correlated with total PBDEs (r = 0.987, p < 0.01). In analyses of the differences of the means of log transformed breast milk PBDE levels for groups of potential covariates, only breast milk BDE-47 and BDE-99 levels were significantly associated with fish (p < 0.05) and meat consumption (p < 0.01). However, we did not find significant correlations between PBDE levels and maternal age, body mass index (BMI), parity, job presence and smoking status. Conclusions: Our findings are mainly limited due to the small sampling size and low doses of PBDEs exposure. Background and human exposure data of PBDEs is lacking, and longitudinal investigations into the environment and biota are encouraged to determine the health impact on future populations in Korea.

• 한국가시화정보학회지
• /
• 제12권3호
• /
• pp.9-14
• /
• 2014

Two-photon microscopy (TPM) has been used in plant research as a high-resolution high-depth 3D imaging modality. However, TPM is known to induce photo-damage to the plant in case of long time exposure, and optimal excitation wavelength for plant imaging has not been investigated. Longer excitation wavelength may be appropriate for in vivo two-photon imaging of Arabidopsis thaliana leaves, and effects of longer excitation wavelength were investigated in terms of imaging depth, emission spectrum. Changes of emission spectrum as a function of exposure time at longer excitation wavelength were measured for in vivo longitudinal imaging. Imaging depth was not changed much probably because photon scattering at the cell wall was a limiting factor. Chloroplast emission spectrum showed its intensity peak shift by 20 nm with transition of excitation wavelength from 849 nm or below to 850 nm or higher. Emission spectrum showed different change patterns with excitation wavelengths in longitudinal imaging. Longer excitation wavelengths appeared to interact with chloroplasts differently in comparison with 780 nm excitation wavelength, and may be good for in vivo imaging.

• 대한치과교정학회지
• /
• 제37권2호
• /
• pp.159-163
• /
• 2007

심한 치근 만곡을 동반한 매복은 흔하지 않으며, 특히 상악 전치의 경우에 그러하다. 이는 외과적 노출과 교정적 견인이 임상적으로 매우 어려우며, 치근유착, 치근의 외흡수, 교정적 견인 후 치근 노출 등의 위험이 있을 수 있기 때문이다. 비록 성공적으로 치료된 증례라 하더라도 치은의 심미를 향상시키기 위하여 치주수술이 필요한 경우가 많다. 본 증례보고는 발육중인 만곡된 치근을 가진 역위 매복된 상악 중절치의 closed eruption technique를 이용한 교정 치험예를 소개하였다.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2008년도 추계학술대회 논문집 Vol.21
• /
• pp.301-301
• /
• 2008

Ion beam (IB)-induced alignment of inorganic materials has been investigated intensively as it provides controllability in a nonstop process for producing high-resolution displays[1][2]. LC orientation via ion-beam (IB) irradiation on the nitrogen doped diamond like carbon (NDLC) thin film deposited by physical deposition method-sputtering was embodied. The NDLC thin film that was deposited by sputter showed uniform LC alignment at the 1200eV of the ion beam intensity. The pretilt angle of LC on NDLC thin films was measured with various IB exposure time and angle. The maximum pretilt angle were showed with IB irradiation angle of $45^{\circ}$ and exposure time of 62.5 sec, respectively. To show NDLC thin film stability in high temperature, thermal stability test was proceeded. The uppermost of the thermal stability of NDLC thin film was $200^{\circ}C$. In this investigation, the electro-optical (EO) characteristics of LC on NDLC thin film were measured.