• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.30 no.9A
• /
• pp.850-857
• /
• 2005

Sensor networks consist of sensor nodes with small size, low cost, lowpower consumption, and multi-functions to sense, to process and to communicate. The main issue in sensor networks has been focused on minimizing power consumption of sensors to maximize network life time. In some critical applications, however, the most important issue is to transmitsensing information to the end user (the sink node) with reliability. Reliable information forwarding using multiple paths in sensor networks (ReinForM) has been proposed to achieve desired reliability in the error-prone channel, but it needs increasing transmission riverhead as the channel error rate becomes high and the number of hops between the source node and the sink node increases. In this paper, we propose a reliable transmission rnechanissmusing intermediate source nodes in sensor networks (ReTrust) to reduce packet overhead while keeping the desired reliability. ReTrust has beenshown to provide desired reliability and reduced overhead via simulationsand analysis.

• Journal of Korean Society of Water and Wastewater
• /
• v.23 no.3
• /
• pp.295-303
• /
• 2009

In the present study, a reliability analysis calculating the probability of system failure has been performed using cut set and results of numerical analysis for unsteady flow in pipe. Especially, the probability of system failure has been evaluated regarding the effect of valve closure which is a really important activity in operation of piping system. In spite of small amount of demand, it was found that fast valve closure can generate high probability of system failure. Furthermore, it was confirmed that surge tank can reduce the unsteady effects and probability of system failure in water distribution system. From the results, it was found that the unsteady flow has a significant effect on the probability of system failure Furthermore, it was able to find which pipe or cut set has high probability of system failure. So it could be used to determine which pipe or cut set has a priority of repair and replacement. Therefore, reliability analysis regarding unsteady flow has to be performed for the planning, designing, maintenance, and operation of piping system.

• Journal of the Microelectronics and Packaging Society
• /
• v.22 no.3
• /
• pp.9-17
• /
• 2015

After its inception in 1994, the Journal of the Microelectronics and Packaging Society has continued to make significant strides in the number and quality of publications within its field. The interest in the microelectronics and packaging research has become more critical as consumer electronic products continue its increasing trend towards thinner and lighter devices that tests the boundaries of electronic devices. This study utilizes social network analysis of all published literature in the Journal for the past 22 years. Using the keywords and abstracts available within each individual article, the publications within the Journal has focused on major topics covering (1) flip chip, (2) reliability, (3) Cu, (4) IMC (intermetallic compounds), and (5) thin film. Using the social network relationship between keywords within articles, flip chip was closely associated with reliability, BGA (ball grid array), contact resistance, electromigration in many of the published research works within the Journal. From the centrality analysis, it was found that flip chip, reliability, Cu, thin film, IMC, and RF (radio frequency) to have a high degree of centrality suggesting these key areas of research have relatively high connectivity with other research topics within the Journal and is central to many of the research fields within the micro-electronics and packaging area. The cohesiveness analysis showed research clustering of five major cohesive sub-groups and was mapped to better understand the major area of research within this field. Research within the field of micro-electronics and packaging converges many disciplines of science and engineering. The continued evolution within this field requires an understanding of the rapidly changing industry environment and the consumer needs.

• Journal of KIISE:Information Networking
• /
• v.31 no.2
• /
• pp.224-232
• /
• 2004

To guarantee the reliability in multicast transmission, researches providing reliability through hierarchical control tree which is independent on data channel tree are known to provide high scalability. However, the logical control tree in transport layer constructed without topology information of the corresponding network layer tree may inefficiently use the network resources because the logical control tree is not closely related to the tree topology of the network layer. A router assisted control tree mechanism presented in this paper would improve the efficiency of the link as well as it would remove the replicated data. In addition, it requires to a router a small change which examines the message type of the control tree.

• Transactions on Control, Automation and Systems Engineering
• /
• v.2 no.3
• /
• pp.182-188
• /
• 2000

High-frequency electric resistance welding (HERW) technique is one of the most productive manufacturing method currently available for pipe and tube production because of its high welding speed. In this process, a heat input is controlled by skilled operators observing color and shape of bead but such a manual control can not provide reliability and stability required for manufacturing pipes of high grade quality because of a variety of bead shapes and noisy environment. In this paper, in an effort to provide reliable quality inspection, we propose a neural network-based method for classification of bead shape. The proposed method utilizes the structure of Kohonen network and is designed to learn the skill of the expert operators and to provide a good solution to classify bead shapes according to their welding conditions. This proposed method is implemented on the real pipe manufacturing process, and a series of experiments are performed to show its effectiveness.

• Proceedings of the Computational Structural Engineering Institute Conference
• /
• 2008.04a
• /
• pp.114-119
• /
• 2008

A refined three-dimensional finite element interaction model between the high-speed train and railway bride deck has been developed in the present study. Analytical predictions of vertical deflections for a railway bridge are compared with in-situ test results and a good agreement is achieved. Then, input variables employed in the analytical comparisons are selected as random variables for the limit state functions. followed by risk assessment. For this purpose, a linear adaptive weighted response surface method has been developed and applied. A typical railway bridge has been selected and the limit state functions are employed from UIC and Korean specifications in the comparative studies. The results reveal that Korean specifications give significantly risky reliability indices in comparison with UIC specifications. It is thus encouraged from the above that the present linear adaptive weighted response surface method can be an alternative for the fast estimation of nonlinear structural systems.

• KSII Transactions on Internet and Information Systems (TIIS)
• /
• v.5 no.8
• /
• pp.1388-1403
• /
• 2011

A vehicular ad-hoc network (VANET) consists of vehicles that form a network without any additional infrastructure, thus allowing the vehicles to communicate with each other. VANETs have unique characteristics, including high node mobility and rapidly changing network topology. Because of these characteristics, routing algorithms based on greedy forwarding such as greedy perimeter stateless routing (GPSR) are known to be very suitable for a VANET. However, greedy forwarding just selects the node nearest to the destination node as a relay node within its transmission range. This increases the possibility of a local maximum and link loss because of the high mobility of vehicles and the road characteristics in urban areas. Therefore, this paper proposes a reliability-improving position-based routing (RIPR) algorithm to solve those problems. The RIPR algorithm predicts the positions, velocities, and moving directions of vehicles after receiving beacon messages, and estimates information about road characteristics to select the relay node. Thus, it can reduce the possibility of getting a local maximum and link breakage. Simulation results using ns-2 revealed that the proposed routing protocol performs much better than the existing routing protocols based on greedy forwarding.

• ETRI Journal
• /
• v.37 no.3
• /
• pp.480-490
• /
• 2015

The reliability of sensor networks is generally dependent on the battery power of the sensor nodes that it employs; hence it is crucial for the sensor nodes to efficiently use their battery resources. This research paper presents a method to increase the reliability of sensor nodes by constructing a connected dominating tree (CDT), which is a subnetwork of wireless sensor networks. It detects the minimum number of dominatees, dominators, forwarder sensor nodes, and aggregates, as well as transmitting data to the sink. A new medium access control (MAC) protocol, called Homogenous Quorum-Based Medium Access Control (HQMAC), is also introduced, which is an adaptive, homogenous, asynchronous quorum-based MAC protocol. In this protocol, certain sensor nodes belonging to a network will be allowed to tune their wake-up and sleep intervals, based on their own traffic load. A new quorum system, named BiQuorum, is used by HQMAC to provide a low duty cycle, low network sensibility, and a high number of rendezvous points when compared with other quorum systems such as grid and dygrid. Both the theoretical results and the simulation results proved that the proposed HQMAC (when applied to a CDT) facilitates low transmission latency, high delivery ratio, and low energy consumption, thus extending the lifetime of the network it serves.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.39C no.11
• /
• pp.1159-1166
• /
• 2014

In this paper, a resource management scheme for enhancing the network connectivity and reliability in wireless USB system is proposed. Wireless USB protocol is suitable for the application that supports the real-time multimedia service in Ship Area Network since it supports high speed data transfer. However, the device's mobility is caused the dramatic change of link state and network topology, and is occurred the degradation of network performance. Therefore, a resource management scheme for wireless USB system is proposed in this paper. The proposed technique can intelligently treat the change of link state, and solve the degradation of network performance. The simulation results show that proposed protocol can enhance the throughput and delay performance by selecting relay device with better link state.

• Asia Marketing Journal
• /
• v.16 no.1
• /
• pp.117-132
• /
• 2014

This study examined the use of Facebook in United Arab Emirates. There were two objectives of this study. The first purpose was to identify the motive for the use of Facebook among people in U.A.E. This study conducted the survey using both qualitative and quantitative methods. One hundred eighty-three working people were used from the survey. Thirty-five questions identified from the interviews were used for the questionnaire design in quantitative method. Factor analysis showed six factors namely usefulness, usage, reliability, making new friends, ethical issue and openness of information. The total variance explained by all the factors was fifty-two percent. This study also examined the demographic variables whether they would play an important role in using the social network site. The study included two more variables, income and married status, which were not frequently examined by previous studies. MANOVA showed statistical significant differences (p < .01) across six factors. ANOVA results showed that gender variable affected only the factor of openness of information. Males were more likely to share their information compared to females. Income variable affected all the factors except the openness of information. The results showed that high-income people had the highest meanscores on three factors (usage, reliability, making new friends) while low-income people had the highest means on usefulness and ethical factors.Marital status had significant effects on usefulness, reliability, and ethical factors. Married people had the low scores on reliability and ethical factors. Lastly, education variable had no effect on all the factors examined.