• Convergence Security Journal
• /
• v.17 no.5
• /
• pp.87-92
• /
• 2017

MANET is a network composed itself because mobile nodes are connected wirelessly. It has been applied to various fields for group communication. However, the dynamic topology by the movement of the nodes causes routing failure frequently because it is difficult to maintain the position information of the nodes participating in the group communication. Also, it has a problem that network performance is decreased due to high overhead for managing information of member nodes. In this paper, we propose a multicast technique using location-based 2-tier virtual group that is flexible and reliable in management of member nodes. The network is composed of cellular zones and the virtual group is constructed using the location information of the nodes in the proposed technique. The virtual group management node is selected to minimize the overhead of location information management for member nodes in the virtual group. In order to improve the reliability for management of member nodes and multicast data transmission, it excludes the gateway node with low transfer rate when setting the route after the packet transmission rate of the member nodes is measured. The excellent performance of the proposed technique can be confirmed through comparative experiments with AMroute method and PAST-DM method.

• Smart Structures and Systems
• /
• v.29 no.1
• /
• pp.129-140
• /
• 2022

The effectiveness of system identification, damage detection, condition assessment and other structural analyses relies heavily on the accuracy and reliability of the measured data in structural health monitoring (SHM) systems. However, data anomalies often occur in SHM systems, leading to inaccurate and untrustworthy analysis results. Therefore, anomalies in the raw data should be detected and cleansed before further analysis. Previous studies on data anomaly detection mainly focused on just single type of data anomaly for denoising or removing outliers, meanwhile, the existing methods of detecting multiple data anomalies are usually time consuming. For these reasons, recognising multiple anomaly patterns for real-time alarm and analysis in field monitoring remains a challenge. Aiming to achieve an efficient and accurate detection for multi-type data anomalies for field SHM, this study proposes a pattern-recognition-based data anomaly detection method that mainly consists of three steps: the feature extraction from the long time-series data samples, the training of a pattern recognition neural network (PRNN) using the features and finally the detection of data anomalies. The feature extraction step remarkably reduces the time cost of the network training, making the detection process very fast. The performance of the proposed method is verified on the basis of the SHM data of two practical long-span bridges. Results indicate that the proposed method recognises multiple data anomalies with very high accuracy and low calculation cost, demonstrating its applicability in field monitoring.

• Journal of Information Processing Systems
• /
• v.12 no.2
• /
• pp.275-294
• /
• 2016

A primary task in wireless sensor networks (WSNs) is data collection. The main objective of this task is to collect sensor readings from sensor fields at predetermined sinks using routing protocols without conducting network processing at intermediate nodes, which have been proved as being inefficient in many research studies using a static sink. The major drawback is that sensor nodes near a data sink are prone to dissipate more energy power than those far away due to their role as relay nodes. Recently, novel WSN architectures based on mobile sinks and mobile relay nodes, which are able to move inside the region of a deployed WSN, which has been developed in most research works related to mobile WSN mainly exploit mobility to reduce and balance energy consumption to enhance communication reliability among sensor nodes. Our main purpose in this paper is to propose a solution to the problem of deploying mobile data collectors for alleviating the high traffic load and resulting bottleneck in a sink's vicinity, which are caused by static approaches. For this reason, several WSNs based on mobile elements have been proposed. We studied two key issues in WSN mobility: the impact of the mobile element (sink or relay nodes) and the impact of the mobility model on WSN based on its performance expressed in terms of energy efficiency and reliability. We conducted an extensive set of simulation experiments. The results obtained reveal that the collection approach based on relay nodes and the mobility model based on stochastic perform better.

• The Transactions of the Korean Institute of Power Electronics
• /
• v.9 no.6
• /
• pp.620-627
• /
• 2004

As h-bridge multilevel inverter is connected with series of single phase power cell, so it obtain high voltage using low voltage power semi-conductor and output voltage similar to sine wave. In this topology, the number of power cell increases in proportion to the output voltage level. Therefore, there are drawbacks that are responsibility against operating ability of main controller and signal wire increase. However, we can overcome this problems by the substitution of serial communication for the PWM signal in power cell control. Additionally, it has merits of reliability and maintenance. This paper deals with the synchronization and phase-shift method of power cell PWM using CAN(Controller Area Network) communication interrupt in H-bridge multilevel inverter. The advantages of proposed method are signal-line simplification using serial communication between main controller and cell controller, burden reduction in main controller, modularization of power cell, easy protection of each power cell, expandability improvement and reliability increase of control signal and power cell. This paper establishes propriety and reliability of proposed method through experiment of 13-level H-bridge multilevel inverter.

• Journal of Digital Convergence
• /
• v.15 no.2
• /
• pp.199-206
• /
• 2017

Embedded control system is widely spreaded and used in various fields including military defence, aviation, medical, etc. due to extended use of smart phones, connected car, IoT. Increasing examples are introduced where embedded control system that perform their unique role such as smart phone and network system organically configure to create new system. According to this trend, organic interface and reliability of each embedded control system are becoming important evaluation factors. The purpose of this paper is to develop quality evaluation criteria method for automobile embedded system, among the fields that use embedded control systems. In order to satisfy high quality level requirements of automobile embedded control system, we surveyed latest trend of automobile embedded control system, analyzed structure and application technology of embedded control system, to establish quality evaluation criteria and method for automobile embedded control system by referring international standard for software (ISO/IEC 9126), and international standard for electric & electronic products (ISO 26262).

• Journal of Advanced Marine Engineering and Technology
• /
• v.20 no.3
• /
• pp.19-28
• /
• 1996

In Asia countries the productions of ship building and marine engines have been increasing, specially Japanese marine industries have worked hard after 1960s and Korean ones after 1980s. Recently the other countries, as Taiwan and China, have been working so that these hour Asian countries are occuping the high level of shared ratio of productions for gross tonnages and horse powers, which are 74 and 64[%] of the world ones ($8.6\times10$+6[GT], $8.6\times10$+6[PS]) in 1994. Korean industries had the highest shared ratio of production of tanker vessel and 2 stroke diesel engine as 45[%]($2.2\times10$+6[GT]) and 37[%]($1.0\times10$+6[PS]) which were more than those of Japan as 34 and 16[%] in 1989 respectively. Some marine databases and their network links among Asian countries are proposed due to the posibility of collection and analyses with their own specifications by the marine industries and operators as well as Japanese ship reliability investigation works(SRIW) like SRIC in Japan. During 1966 and 1996 16 times of SRIW in Japan have been carried out by ship reliability investigation group(SRIG) in Japan. There have been collected and evaluated a great number of field data of failures and maintenances($700\times10$+3[occ], $1.6\times10$+6[MH}) during running hours($13.4\times10$+6[Hrs]), from which many kinds of evaluation indices could be gotten as the three indices of occurring rate$\lambda$(52.2[occ/1000Hrs]), average man-hour mh(2.29[MH/occ]) and manning index MI(119[MH/1000Hrs]). An estimation example having the three indices$\lambda$, mh and MI were shown by the SRIC 1990 Data Base in Japan for the two kinds of fuel oil suppling subsystems which are dual fuel oil one(DFOS) and mono fuel oil one(MFOS). Three indices MI, and mh for DFOS and MFOS results in 7.16 and 5.20[MH/1000Hrs], 2.63 and 2.06[occ/1000 Hrs]. Therefore the more simple subsystem MFOS can save approximately 30[%] of maintenance load. Finlly an utilization methods are shown for the SRIC in Japan by means of computer system and worlwide internet links.

• IEIE Transactions on Smart Processing and Computing
• /
• v.5 no.1
• /
• pp.29-34
• /
• 2016

A controller area network (CAN) controller is an integral part of an electronic control unit, particularly in an advanced driver assistance system application, and its characteristics should always be advantageous in all aspects of functionality especially in real time application. The cost should be low, while maintaining the functionality and reliability of the technology. However, a CAN protocol implementing serial operation results in slow throughput, especially in a cyclical redundancy checking (CRC) unit. In this paper, digital signal processing (DSP) algorithms are implemented, namely pipelining, unfolding, and retiming the CAN controller in the CRC unit, particularly for the encoder and decoder sections. It must attain a feasible iteration bound, a critical path that is appropriate for a CAN system, and must obtain a superior design of a high-speed parallel circuit for the CRC unit in order to have a faster transmission rate. The source code for the encoder and decoder was formulated in the Verilog hardware description language.

• IEMEK Journal of Embedded Systems and Applications
• /
• v.3 no.4
• /
• pp.198-206
• /
• 2008

Internet protocol television (IPTV), one of the most emerging services, offers multimedia streaming services with security, reliability, and relevant quality of service (QoS)/quality of experience (QoE). It provides added values to all the involving players and also brings technical and business challenges to them. For IPTV services, we expect to adopt the next generation network (NGN) environment for high quality and the Web technologies for personalization to meet the customer's necessity. Web can provide an open, flexible, and agile platform. Therefore, in this paper, we propose personalized IPTV services based on Web-based open platform in NGN environment and present functional architecture for Web-based personalized IPTV services. Technical issues for deploying the proposed IPTV services using Web are also provided. The objective of this paper is to analyze the critical architectural issues for developing viable and feasible networking platform models for personalized IPTV services.

• Proceedings of the IEEK Conference
• /
• 2003.07d
• /
• pp.1311-1314
• /
• 2003

In this paper, we propose a method to measure document similarity. First, we have exploited single-term method that extracts nouns by using a lexical analyzer as a preprocessing step to match one index to one noun. In spite of irrelevance between documents, possibility of increasing document similarity is high with this method. For this reason, a term-phrase method has been reported. This method constructs co-occurrence between two words as an index to measure document similarity. In this paper, we tried another method that combine these two methods to compensate the problems in these two methods. Six types of features are extracted from two input documents, and they are fed into a neural network to calculate the final value of document similarity. Reliability of our method has been proved by an experiment of document retrieval.

• Proceedings of the KIEE Conference
• /
• 2011.07a
• /
• pp.366-367
• /
• 2011

The DC distribution system iis a new promising topologies in a field of future smart distribution system. This system has high efficiency and reliability. So it is expected that there would be an increase in the installation of DC distribution systems. In this paper, the parameter of the DC/DC converter impact on customer's the power quailty in the DC distribution system when the fault occurred. For the analysis, DC network to be modeled using PSCAD/EMTDC. The fault is occurred at phase A in secondary side of MTR which is AC system. Then compared voltage and power at the customer side by varying the capacity of capcitor in the DC/DC converter.