• 한국광학회지
• /
• 제10권6호
• /
• pp.524-526
• /
• 1999

본 논문에서는 외부 공진기 반도체 링 레이저 내부에 에탈론을 삽입함으로써 외부 공진기 링 레이저의 종모드 간격이 현저히 변화하는 사실을 관측하고 이에 대한 이론적 분석을 수행하였다. 외부공진기 링 레이저의 종 모드 간격은 에탈론의 단면 반사율에 의존하여 변화하였으며, 공진모드의 분석을 통해 이에 대한 정량적인 해석을 보였다. 또한 이러한 효과가 에탈론이나 FP 필터의 단면 반사율의 정밀한 측정에 응용될 수 있다는 것을 실험을 통해 증명하였다. 제안된 방법은 특히 높은 반사율에 대해서도 정밀한 측정결과를 얻을 수 있으며 측정이 쉽고 매우 빠르게 이루어진다.

• KIEAE Journal
• /
• 제15권3호
• /
• pp.49-56
• /
• 2015

Purpose: Due to recent increase on energy consumption for light in building, many studies to mitigate this issue have been conducted. Various researches have been carried out to suggest light shelf as one of the solutions, but researches for its reflectivity is very few. In fact, existing research on light shelf shows that utilizing more than 90% of high-illumination materials causes imbalance of glare and illuminance. Method: Therefore this research aimed to evaluate the performance of light shelves depending on reflectivity and to identify proper solution through test-bed. Result: The results are following: 1) Increased reflectivity generally contributed to increase of indoor illuminance but degrade uniformity factor related with indoor comfort of light environment. 2) The $0^{\circ}fixed$ light shelf with 75% of reflectivity and width of 300mm and 40mm appeared to consume more energy than other shelves. Therefore, it is analyzed as unsuitable. 3) This research was conducted by calculating appropriate angle of light shelf around winter and summer solstices and vernal/autumnal equinox. Based on this, performance evaluation was undertaken depending on reflectivity of movable light shelf, which is activated by external sources and can be applied with lower reflectivity than fixed shelf. However, one exception was a movable shelf with width of 600mm that increased light energy consumption when 75% of reflectivity was applied. 4) Performance evaluation of fixed and movable light shelf showed that the shelf with 80% of reflectivity came up with suitable results, but 75% of reflectivity may be applied depending on the width and angle of the shelf. This research is meaningful in that estimation of appropriate reflectivity of light shelf can resolve the glare problem and improve light environment, and further research would be desirable under more diverse conditions to identify proper solution.

• 통합자연과학논문집
• /
• 제6권2호
• /
• pp.82-86
• /
• 2013

This paper describes a method for the preparation of porous polymethylmethacrylate showing optical reflectivity from the porous silicon template. A porous polymethylmethacrylate showing optical reflectivity was prepared by replicating porous silicon template which was obtained by applying a computer-generated periodic square current density and resulted in a mirror with high reflectivity in a specific narrow spectral region. A porous polymethylmethacrylate showing an excellent reflectivity was successfully obtained by dissolving the Porous silicon template from the porous polymethylmethacrylate composite film. A porous polymethylmethacrylate exhibited a sharp reflection resonance in the reflectivity spectrum. Surface image of the porous polymethylmethacrylate indicated that the surface of the porous polymethylmethacrylate film had a porous structure. These porous polymethylmethacrylate films in aqueous solutions were stable for several days without any degradation.

• 한국방사선학회논문지
• /
• 제12권1호
• /
• pp.101-106
• /
• 2018

다층박막거울은 높은 반사 효율로 엑스선을 단색화 하는데 많이 사용되고 있다. 반사되는 엑스선의 파장은 두께주기와 입사각도에 의해 결정되고, 반사율은 층수와 표면 거칠기에 크게 의존하게 된다. 다층박막거울은 중원소와 경원소가 번갈아 적층되어 있는 구조로 되어 있으며 각 계면에서의 거칠기를 고려해야 한다. 본 논문에서는 두께 변화 W/Si 다층박막거울에서 계면 거칠기와 상호확산을 동시에 고려하여 반사율을 조사하였다. 두께 변화 다층박막거울은 균일한 다층박막거울에 비해 반사율은 감소하나 각도 및 에너지 반치폭이 넓은 특징을 보였으며, 상호확산에 따른 반사율의 저하가 크게 증가하였다. 이론적인 설계값에 가까운 반사율을 획득하기 위해서는 다층박막거울을 제작 할 때 나타나는 상호확산의 효과를 고려하여 설계함으로써 목적에 부합하는 최적의 다층박막거울을 설계하고 제작할 수 있을 것이다.

• 한국광학회지
• /
• 제28권6호
• /
• pp.346-350
• /
• 2017

본 논문에서는 고굴절률 폴리머와 에포다이즈드 격자를 이용한 파장가변필터를 구현하였다. 기존의 에포다이즈드 브래그 격자는 격자의 깊이가 감소하는 부분이 있기 때문에 균일 분포 브래그 격자와 비교하였을 때 반사율이 낮아지게 된다. 이와 같은 문제점을 개선하기 위해서 에포다이즈드 격자 층에 고굴절률 폴리머를 삽입하면 좁은 대역폭을 유지하면서 높은 반사율을 얻을 수 있다. 제작된 파장 가변 필터의 반사율은 98.5%이며, 3-dB와 20-dB 대역폭은 각각 0.51 nm, 1.05 nm 이다.

• 통합자연과학논문집
• /
• 제2권3호
• /
• pp.211-214
• /
• 2009

A new porous silicon (PSi) microcavity sensor for the detection of volatile organic compounds (VOCs) was developed. PSi microcavity sensor exhibiting unique reflectivity was successfully obtained by an electrochemical etching of silicon wafer. When PSi was fabricated into a structure consisting of two high reflectivity muktilayer mirrors separated by an active layer, a microcavity was formed. This PSi microcavity is very sensitive structures. Reflection spectrum of PSi microcavity indicated that the full-width at half-maximum (FWHM) was of 10 nm and much narrower than that of fluorescent organic molecules or quantum dot. The detection of volatile organic compounds (VOCs) using PSi microcavity was achieved. When the vapor of VOCs condensed in the nanopores, the refractive indices of entire particle increased. When PSi microcavity was exposed to acetone, ether, and toluene, PSi microcavity in reflectivity was red shifted by 28 nm, 33 nm, and 20 nm for 2 sec, respectively.

• 통합자연과학논문집
• /
• 제2권2호
• /
• pp.82-85
• /
• 2009

Distributed Bragg reflector (DBR) porous silicon (PSi) was generated by an electrochemical etching a bragg structure into a silicon wafer through electrode current in aqueous ethanolic HF solution. DBR PSi exhibiting unique reflectivity was successfully obtained by an electrochemical etching of silicon wafer using square current waveform. The multilayered photonic crystals of DBR PSi exhibited the reflection of a specific wavelength with high reflectivity in the optical reflectivity spectrum. In this work, we have developed a method to create refractive index in Si substrate through intensity of an electric current. The electrochemical process allows for precise control of the structural properties of DBR PSi such as thickness of the porous layer, porosity, and average pore diameter. The number of reflection peak of DBR PSi and its pore size increased as the intensity of electric current increased. This might be a demonstration for the fabrication of specific reflectors or filters.

• 한국결정성장학회지
• /
• 제29권5호
• /
• pp.229-237
• /
• 2019

야간이나 악천후에서도 높은 도로의 차선인식률을 유지하기 위해, 통상 재귀반사(retro-reflectivity) 특성이 뛰어난 고 굴절률의 글라스비드(glass bead)를 도로표시 페인트 위에 도포한다. 국가별로 일반 도로표시의 재귀반사 기준이 다르며, 국내는 백색광 기준으로 $240mcd/m^2{\cdot}lux$, 선진국들은 $250{\sim}300mcd/m^2{\cdot}lux$로 규정되어있다. 본 논문에서는 도로표시 관련 규정과 글라스비드에 대한 동향에 대하여 고찰하고, 향후 자율주행차량 상용화에 대비하여 규정 기준치 및 글라스비드물성 향상 필요성에 대하여 논의하였다.

• 대한전기학회논문지:전기물성ㆍ응용부문C
• /
• 제55권2호
• /
• pp.55-60
• /
• 2006

In order to suppress lasing oscillation and obtain high light power, We have proposed a novel SLD which is formed with a straight and tilted waveguide. The window region is used to suppress lasing oscillation and reduce the facet reflectivity. High power and low reflectivity is obtained by the straight and tilted waveguide. Based on the theoretical analysis, we have fabricated the SLD with the waveguide of 500 $\mu$m length and window region of 50 $\mu$m by LPE equipment. Through the measurements of optical characteristics, the output light power of 3 mW was obtained at the 150 mA CW injection current and 25$^{circ}C$. We have confirmed that the proposed SLD has a 0.8 dB spectrum ripple lower than 1 dB which is sufficiently low reflectivity for preventing lasing.

• 대기
• /
• 제30권4호
• /
• pp.347-360
• /
• 2020

The automatic algorithm optimized for the Korean Peninsula was developed to detect and track the center of typhoon based on a geometrical method using high-resolution retrieved WISSDOM (WInd Syntheses System using DOppler Measurements) wind and reflectivity data. This algorithm analyzes the center of typhoon by detecting the geometric circular structure of the typhoon's eye in radar reflectivity and vorticity 2D field data. For optimizing the algorithm, the main factors of the algorithm were selected and the optimal thresholds were determined through sensitivity experiments for each factor. The center of typhoon was detected for 5 typhoon cases that approached or landed on Korean Peninsula. The performance was verified by comparing and analyzing from the best track of Korea Meteorological Administration (KMA). The detection rate for vorticity use was 15% higher on average than that for reflectivity use. The detection rate for vorticity use was up to 90% for DIANMU case in 2010. The difference between the detected locations and best tracks of KMA was 0.2° on average when using reflectivity and vorticity. After the optimization, the detection rate was improved overall, especially the detection rate more increased when using reflectivity than using vorticity. And the difference of location was reduced to 0.18° on average, increasing the accuracy.