• 한국정밀공학회지
• /
• 제18권4호
• /
• pp.112-120
• /
• 2001

In this paper, the development of a new group controller for high-speed elevator is carried out utilizing the approach of an adaptive dual fuzzy logic. Some goals of control are the minimization of waiting time, mean-waiting time and long-waiting time in a high building, when a new hall call is generated, adaptive dual fuzzy controller evaluate traffic pattern and change appropriately the membership function of a fuzzy rule base. Controls for co-operation among elevators in a group control algorithm arte essential, and the most critical control function in the group controller is an effective and proper hall call assignment of elevators. The group elevator system utilizing adaptive dual fuzzy control reveals a great deal of improvement on its performance.

• 한국군사과학기술학회지
• /
• 제4권2호
• /
• pp.157-178
• /
• 2001

In this paper, the nonlinear control of high precision pointing stabilization system using feedback-linearization design methodology based on system parameter identification is discussed. Modern nonlinear servomechanism theory is adapted to cope with the hard nonlinearities inherent in the turret system. The mathematical models of electrical turret driving system to develop a high performance control algorithm are derived, and the parameter estimation algorithm identifying the unknown system parameters such as vicious and coulomb frictions, stiffness and inertia is developed. Through computer simulation and experiments, it is shown that pointing and tracking accuracy and stabilization against the wideband stochastic disturbance induced by vehicle running on the bump course are improved. Therefore, it is considered the proposed nonlinear control technique is effective in counteracting the nonlinearities and disturbances.

• 디지털산업정보학회논문지
• /
• 제8권4호
• /
• pp.159-165
• /
• 2012

The accurate focusing position should be determined for accurate measurements In VMS. Camera lens focusing is an important problem in computer vision and video measuring systems (VMS) that use CCD cameras and high precision XYZ stages. Camera focusing is a very important step in high precision measurement systems that use computer vision technique. The auto focusing process consists of two steps, the focus value measurement step and the exact focusing position determination step. It is suitable for eliminating high frequency noises with lower processing time and without blurring. An automatic focusing technique is applied to measure a crater with a one-dimensional search algorithm for finding the best focus. Throughout this paper, the suggested algorithm for the Auto focusing was combined with the learning. As a result, it is expected that such a combination would be expanded into the system of recognizing voices in a noisy environment.

• 전자공학회논문지B
• /
• 제29B권1호
• /
• pp.76-84
• /
• 1992

The vision system is essential for SMT(Surface Mounting Technology) automation. The system plays the role of matching the positions betweem SMD and PCB, and inspecting SMD in the final stage of mounting. Real-time processing and high-precision are indispensable for practical purpose. In this paper, a new algorithm for position matching and inspection of SMD is proposed, and which is implemented on the DSP board using DSP board using DSP5600. Experimental results show mean matching error within 0.1 mm in the direction of x,y and execution time within 300msec. Therefore, we could attain high-speed and high-precision of the vision system for SMT automation.

• International Journal of Precision Engineering and Manufacturing
• /
• 제2권1호
• /
• pp.33-42
• /
• 2001

In switched reluctance motor(SRM) deives, the turn-on and turn-off angles of each phase switch should be accurately controlled for accuracy and efficiency. The accuracy of the switching angles is mainly dependent upon the resolution of the encoder and the sampling period of the microprocessor, that are used to provide the information of the rotor position and to implement a control algorithm of the SRM, respectively. Thus, the higher the speed of the SRM is increased, the larger the amount of the switching angle deviations are from preset turn-on and turn-off angles. Consequently, the motor can not be driven stably high speed region. There fore, a simples and low cost encoder suitable for the practical and stable SRM drive is proposed and the control algorithm to provide the switching signals using a simple digital logic circuit is also presented for a wide speed range operation.

• 한국정밀공학회지
• /
• 제22권4호
• /
• pp.121-127
• /
• 2005

There is a necessity for the communication between intelligent robots and human beings because of wide spread use of them. Gesture recognition is currently being studied in regards to better conversing. On the basis of previous research, however, the gesture recognition algorithms appear to require not only complicated algorisms but also separate training process for high recognition rates. This study suggests a gesture recognition algorithm based on computer vision system, which is relatively simple and more efficient in recognizing various human gestures. After tracing the hand gesture using a marker, direction changes of the gesture trajectory were analyzed to determine the simple gesture code that has minimal information to recognize. A map is developed to recognize the gestures that can be expressed with different gesture codes. Through the use of numerical and geometrical trajectory, the advantages and disadvantages of the suggested algorithm was determined.

• Journal of Mechanical Science and Technology
• /
• 제16권2호
• /
• pp.155-164
• /
• 2002

The power steering system for vehicles is becoming essential for supporting the steering efforts of the drivers, especially for the parking lot maneuver Although hydraulic power steering has been widely used for years, its efficiency is not high enough. The problems associated with a hydraulic howe. steering system can be solved by a motor driven power steering (MDPS) system. In this study, a dynamic model and a control algorithm for the ball screw type of MDPS system have been derived and analyzed by using the method of discrete modeling technology. To improve steering feel and power steering characteristics, two derivative gains are added to the conventional power boosting control algorithm. Through simulations, the effects of the control gain on the steering angle gain were verified in the frequency domain. The steering returnability and steering torque phase lag in on-center handling test were also evaluated in the time domain.

• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 1992년도 한국자동제어학술회의논문집(국내학술편); KOEX, Seoul; 19-21 Oct. 1992
• /
• pp.1072-1077
• /
• 1992

In ths paper a new active assembly algorithm for chamferless precision parts mating, is considered. The successful assembly task requires an extremely high position accuracy and a good knowledge of mating parts. However, conventional assembly mehtod alone makes it difficult to achieve satisfactory assembly performance because of the complexity and the uncertainties of the process and its environments such as imperfect knowledge of the parts being assembled as well as the limitation of the devices performing the assebled as well as the limitation of the devices performing the assembly. To cope with these problems, a self-learning rule-based assembly algorithm is proposed by intergaring fuzzy set theory and neural network. In this algortihm, fuzzy set theory copes with the complexity and the uncertainties of the assembly process, while neural network enhances the assembly schemen so as to learn fuzzy rules form experience and adapt to changes in environment of uncertainty and imprecision. The performance of the proposed assembly algorithm is evaluated through a series of experiments. The results show that the self-learning fuzzy assembly scheme can be effecitively applied to chamferless precision parts mating.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2008년도 제39회 하계학술대회
• /
• pp.677-678
• /
• 2008

In this study, the method for the measurement of harmonics at nonsinusodial signal, which utilizes two synchronized high precision digital multimeters has been developed. The harmonics of voltage and current waveforms were computed from the acquired digitize samples through the DMMs and using developed software which based on FFT algorithm. The system can be used as a reference system to calibrate harmonic analyzers.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 1995년도 춘계학술대회 논문집
• /
• pp.371-376
• /
• 1995

Computer vision is applicated to measure the position and orientation of the SMD on 8mm Camcoder PCB and advanced image processing algorithms for high accuracy and real time processing are proposed. Illumination conditions are optimized for the best image formation and a set of LEDs is used as economic illuminator, which is regarded as a summation of many point sources. Conctete optical system is constructed and the performance of the proposed algorithm is verified by several experiments.