• Proceedings of the KIPE Conference
• /
• 2000.07a
• /
• pp.641-644
• /
• 2000

Recently As the performance of the personal computer has been improving rapidly lots of research for the pc-based numerical computer actively progress in an easy repair maintenance and improving the performance with less cost. This paper presents the design using complex programmable logic device(CPLD). The CPU of Motion Controller that function as the real time control of the independent multi-axis motion the error-detect module and external I/O control made use of 80C196KC, In this paper The PC-NC effectively distributed to the load of NCK(numerical computer kernel) and have the advantage of high speed and precision.

• Journal of information and communication convergence engineering
• /
• v.1 no.4
• /
• pp.228-232
• /
• 2003

The previous design work for very large final amplifier pumped by electron beam module was described from the point of view of energy characteristics. In this work, the design problems for phase front distortion, ASE, and gain control in large aperture amplifier are presented in detail.

• Proceedings of the IEEK Conference
• /
• 2001.06b
• /
• pp.349-352
• /
• 2001

As microprocessor and SOC (System On a Chip) performance moves into the GHz speed, the high-speed asynchronous design is becoming challenge due to the disadvantageous power and speed aspects in synchronous designs. The next generation on-chip systems will consist of multiple independently synchronous modules and asynchronous modules for higher performance, so the interface module for data transfer between multiple clocked IPs is designed with Xilinx FPGA and simulated with RISC microprocessor.

• Proceedings of the KIEE Conference
• /
• 1999.11d
• /
• pp.1078-1080
• /
• 1999

A laser pulse generator which consists of charging resistor, energy storage capacitor laser diode, and switching elements was designed in order to generate 15ns, 20W laser pulses. And the effects of performances of SCR and FET as switching elements are compared. When SCR is used, the SCR's low maximum voltage makes the circuit so complicated, and when FET is used, the FET needs the special sate driver which improves the FET's operation.

• Proceedings of the KSR Conference
• /
• 2008.06a
• /
• pp.1853-1859
• /
• 2008

IGBT modules are designed for low loss, rugged for all environments and user friendly. Low on state saturation voltage with high switching speed is the primary concerns. In this paper selection of IGBT, module ratings and characteristics are discussed. The IGBT design topic of protection against over voltage and over current are covered. Emphasis on turn off switching, short circuit switching and necessary precautions are dealt. Selection of IGBT device, gate drive power, and its lay out considerations are covered in detail.

• Proceedings of the KIPE Conference
• /
• 2012.07a
• /
• pp.345-346
• /
• 2012

본 논문에서는 공진탱크만으로 고승압(>10)을 성취할 수 있는 새로운 비절연 컨버터를 제안한다. 제안한 컨버터는 스위치의 ZVS 턴온 및 다이오드의 ZCS 턴오프가 가능하여 스위칭 손실을 최소화 할 수 있으며 스위치의 전압정격이 출력전압보다 작아 작은 도통손실을 갖는 소자 선정이 가능하다. 제안하는 컨버터의 동작원리를 제시하고 실험을 통하여 타당성을 검증하였다.

• Journal of the Korean Institute of Illuminating and Electrical Installation Engineers
• /
• v.21 no.10
• /
• pp.59-65
• /
• 2007

Recently, ubiquitous sensor network(USN) techniques have been applied to electric power facility management. This paper dealt with the designed and fabricated ubiquitous sensors which monitor transformers and lightning arresters installed in overhead distribution systems. The sensors consist of a 8-[bit] microprocessor unit, a wireless communication nodule specified in IEEE 802.15.4, and associated electronics. A Rogowski coil was fabricated to measure load of transformer and surge current without saturation having good linearity up to 1000[A]. A zero-phase current transformer with a high relative permeability of $10^5$ at 180[Hz] was used to detect small leakage current of $50[{\mu}A]{\sim}1[mA]$ flowing lightning arrester, and the frequency bandwidth of the module is ranges from 12[Hz] to 1.24[kHz] at -3[dB].

• Journal of Advanced Navigation Technology
• /
• v.20 no.1
• /
• pp.86-92
• /
• 2016

Recently, solar module is installed in crowded areas to offers services so that people can charge their smartphones or tablets. However, the burden in terms of cost is high to install in areas where utilization ratio is low and installation is difficult in limited spaces. In this paper, a system for collecting and providing the optical power is proposed from the analysis about the person that receives service in each area using the real-time data provided by the state and collected from the actual environment as well as considering the waiting time and the solar charging time in different environments. As a result, This study shows that charge was not delayed since collecting power exceeds charging power. Smartphone was fully charged in ninety-five minutes. we confirmed that with one smartphone, it can be charged a approximately fifty percent of the battery in between ten to twenty minutes, with multiple units they can be charged a approximately twenty percent of the battery in between ten to twenty minutes.

• The Journal of the Institute of Internet, Broadcasting and Communication
• /
• v.12 no.6
• /
• pp.279-283
• /
• 2012

In is paper, we design and implement the low power, high speed touch screen controller that calculates and outputs the coordinate of touch point on the touch screen of mobile devices. The system clock is 10HMz, the number of input channels is 21, standby current is $20{\mu}A$, dynamic range of input is 140pF~400pF and the response time is 0.1ms/frame. It contains the power management unit for low power, automatic impedance calibration unit in order to adapt to humidity, temperature and evaluation board, adjacent key and pattern interference suppression unit, serial interface unit of I2C and SPI. The function and performance is verified by using FPGA and $0.18{\mu}m$ CMOS standard process. The implemented touch screen is designed for using in the double layer ITO(Indium Thin Oxide) module with diamond pattern and single layer ITO module for cost-effective which are applied to mobile phone or smart remote controller.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.22 no.3
• /
• pp.380-388
• /
• 2011

In this paper, we developed the X-band 63 watt pulsed SSPA(Solid State Power Amplifier) by using HMIC(Hybrid Microwave Integrated Circuits). The pulsed SSPA consists of power supply and 3-stage amplifier modules : pre-amplifier stage, driver-amplifier stage, final-amplifier stage. The developed pulsed SSPA provides more than 63 watts of output power with a short pulse width and the duty cycle of up to 1.2 % at $70^{\circ}C$. The fabricated module offers great than 37 dB of saturated gain across the operating band. Input and output VSWR is <1.5:1. This module has an average current of 400 mA typical and operates at a +28 $V_{dc}$ supply. The developed SSPA in this paper can apply to pulsed Doppler radar with high speed operation.