• Proceedings of the Korean Society of Laser Processing Conference
• /
• 2005.11a
• /
• pp.26-31
• /
• 2005

• Proceedings of the Optical Society of Korea Conference
• /
• 2004.02a
• /
• pp.102-103
• /
• 2004

• Proceedings of the KIPE Conference
• /
• 2012.07a
• /
• pp.605-606
• /
• 2012

The cost of a PV(Photovoltaic) installation are driving the market and the need for subsidized schemes, such as feed-in tariffs. Concentrated photovoltaic(CPV) is leading the development of future low cost renewable energy sources. CPV is offering high efficiency systems. This paper proposes technology and market for CPV.

• Journal of the Microelectronics and Packaging Society
• /
• v.22 no.4
• /
• pp.15-23
• /
• 2015

Lead-free bonding has attracted significant attention for automotive power device packaging due to the upcoming environmental regulations. Silver (Ag) is one of the prime candidates for alternative of high Pb soldering owing to its superior electrical and thermal conductivity, low temperature sinterability, and high melting temperature after bonding. In this paper, the bonding technology by Ag paste was introduced. We classified into two Ag paste bonding according to applied pressure, and each bonding described in detail including recent studies.

• 한국정보디스플레이학회:학술대회논문집
• /
• 2008.10a
• /
• pp.1525-1528
• /
• 2008

High-luminance CNT-FED character-displays using simple line-rib-structure was performed. One display-panel had $48{\times}480$-dots and the sub-pixel pitch was 1mm. Another panel had $32{\times}256$-color-pixels, and the subpixel size was $0.6mm{\times}1.8mm$. The power consumption was less than 10W at character-displaying module. It should be useful for public display even under emergent no-power condition.

• Proceedings of the KIPE Conference
• /
• 2010.07a
• /
• pp.256-258
• /
• 2010

MPM(Microwave Power Module)은 진공 전력증폭기인 진행파관(TWT,Traveling Wave Tube)과 반도체 전력증폭기(SSA, Solid State Amplifier)를 결합한 구조로서, 미세한 RF신호를 입력 받아 고출력의 RF 신호로 증폭하는 장치이다. 본 논문은 MPM을 구동하기 위해, 필요한 수 kV이상의 높은 전압을 TWT에 공급해주는 고전압 전원공급기(HVPS, High Voltage Power Supply)에 관한 것이다. Main Topology는 Resonant Phase Shift Full Bridge Converter이며, 승압의 효과를 높이기 위해 2차 측에는 Voltage Multiplier를 사용하였다. MPM을 구동하는데 필요한 전압인Cathode(-4kV), FE_Bias(-5.25kV), Collector(-2kV)를 생성하며, FE_ON, OFF신호에 따라 고전압 스위칭 동작을 하여, RF 증폭을 제어 할 수 있다. 최종적으로 Prototype을 제작하고, 고찰된 실험결과를 제시하여 개발된 HVPS의 우수성을 검증한다.

• Transactions on Electrical and Electronic Materials
• /
• v.17 no.1
• /
• pp.21-24
• /
• 2016

A junction box used in a 3 kW photovoltaic power generation system plays a role in collecting and supplying the direct current voltage produced by photovoltaic modules to an inverter. It is also used for facilitating maintenance checks and protecting the module and inverter by keeping the voltage constant. As for the junction box, using it in a parallel connection creates a difference between the setup modules. In order to compensate, an inverse voltage diode is used. But the high-power created through the solar generator can be delivered to the inverter through the inverter regularly. Therefore, a component can break down due to excess heat. And consequently short circuits and electric leakage occurs. In this study, using a junction box that enabled the bypass of high electric power, it was possible to reduce heat generation by approximately 35℃ when compared to a standard junction box.

• Journal of the Korean Solar Energy Society
• /
• v.29 no.4
• /
• pp.28-33
• /
• 2009

In 2008, the global photovoltaic(PV) market reached 5.6GW and the cumulative PV power installed totalled almost 15GW compared to 9GW in 2007. Due to a favourable feed-in-tariff, Korea emerged in 2008 as the 4th largest PV market worldwide. PV power installation rose 495.5 percent to 268MW in 2008 compare to 45MW in 2007. Building integrated photovoltaic(BIPV) has the potential to become a major source of renewable energy in the urban environment. BIPV has significant influenced on the reflection by rear materials such as white back sheet and the heat transfer through the building envelope because of the change of the thermal resistance by adding or replacing the building elements. In this study, to use as suitable building materials into environmentally friendly house like green home, characteristic analysis of BIPV module according to rear materials achieved. Electrical output of PV module with white back sheet is high about 10% compared to other pv module because of 83% reflectivity of white back sheet compared to 8.4% reflectivity of other PV modules with different rear materials(black back sheet and glass). In the result of outdoor experiment during a year, electrical output of four different PV module is decreased about 3.72%.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 1999.11a
• /
• pp.467-474
• /
• 1999

In this paper, Fault tolerant digital governor, using duplex I/O module and triplex CPU module and also 2 out of 3 voting algorithm and adding self diagnostic ability, is designed to realize ceaseless controlling and to improve the reliability of control system. The processor module of the system(SIDG-3000) is developed based on MC68EC040 32 Bit of Motorola, which guaranteed high quality of the module ,and SRAM for data also SRAM for command are separated. The process module also includes inter process communication function and power back up function (SRAM for back-up). System reliability is estimated by using the model of Markov process. The reliability of triplex system in mission time can be improved about 1.8 times in reliability 86%. 2.8 times in 95 %, 6 times in 99 % compared with a single control system. Designed digital governor system is applied after modelling of the steam turbine generator system of Buk-Cheju Thermal Power Plant. Simulation is carried out to prove the effectiveness of the designed digital governor system

• Journal of the Korean Institute of Electrical and Electronic Material Engineers
• /
• v.34 no.2
• /
• pp.110-114
• /
• 2021

In this study, we fabricated light-weight solar module for various applications such as building integrated photovoltaics (BIPV), vehicles, trains, etc. Ethylene tetra fluoro ethylene (ETFE) film was applied as a material to replace the cover glass, which occupies more than 65% of the weight of the PV module. Glass fiber reinforced plastic (GRP) was applied to the ones with a low durability by replacing the cover glass to ETFE. Moreover, to achieve a high solar power conversion in this study, we applied a shingled design to weight reduced solar modules. The shingled module with GRP shows 183.7 W of solar-to-power conversion, and the output reduction rate after weight load test was 1.14%.