• The Journal of Korean Society for Radiation Therapy
• /
• v.30 no.1_2
• /
• pp.169-176
• /
• 2018

Purpose : The purpose of this study is to evaluate clinical applicability of Co-60 ViewRay treatment plan to increase the skin dose in case of high skin dose is required such as Malignant Fungating Wound By measuring the presence / absence of Bolus application and skin dose by the treatment device and comparing it Materials and Methods : Nine inner measuring points of 2.5 cm lattice arrangement and all 13 measuring points including upper and lower left and right measuring points touching the chest and skin were marked. After CT was taken, each treatment plan was formulated through Eclipse and ViewRay-TPS, and a Fixed beam-IMRT treatment plan was formulated so that the left chest V2Gy=95 % is delivered. Before measurement QED detector was calibrated and the QED detector was positioned at the 13 measurement points displayed on Phantom and surface dose of each treatment planner was measured using 5 mm Bolus application using True-beam and View-ray before and after, measure three times and compare each before applying 5 mm Bolus. Results : The surface dose of the Co-60 ViewRay and the linear accelerator appeared at $76.8%{\pm}5.2%$ vs. $67.3{\pm}%7.5%$ and the surface dose after application of 5 mm Bolus was $87.6%{\pm}8.9%$ vs. $80.3%{\pm}10.2%$ It was measured at 10.2 % (p<0.001). Conclusion : As a result of the surface dose measurement of each treatment instrument, Co-60 ViewRay confirmed that the surface dose reached 95.6 % of 6 MV Linac with conventional 5 mm bolus, despite not using Bolus (p<0.001). Also, by utilizing magnetic resonance images for each treatment, it is possible to observe the change in the treatment site without the problem of exposure, it is easy to formulate an adaptive treatment plan and it is easy to secure the skin dose, so the size In the case of Malignant Fungating Wound patients who need fast skin changes and need high skin doses, Co-60 ViewRay is considered to be more useful than linear accelerators.

• Korean Journal of Heritage: History & Science
• /
• v.55 no.2
• /
• pp.24-48
• /
• 2022

Bronze mirrors found in pagodas were regarded as simple offerings and thus have received little attention in studies. Furthermore, the few studies on bronze mirrors enshrined in pagodas have focused on the line-engraved mirrors found in the pagodas of the Kingdom of Wuyue; therefore, it is difficult to understand the general characteristics of the bronze mirrors enshrined in the pagodas. This study assumes that the bronze mirrors found in many pagodas in the Kingdom of Wuyue and the Song dynasty were enshrined for a specific purpose. To explore this assumption and accurately understand the artifacts, this study focuses on the location and method of enshrinement. The number of bronze mirrors enshrined in pagodas increased during the Kingdom of Wuyue, with the mirrors expressing statues and inscriptions related to Buddhism rather than being simple offerings. This shows that the purpose of the bronze mirror changed. The influence of the Kingdom of Wuyue continued during the Song dynasty; however, the pattern of bronze mirror enshrinement changed due to the culture and social atmosphere of the time. The most common types of enshrined bronze mirrors were plain, and bronze mirrors from the Dang dynasty were also used consistently. Plain bronze mirrors were used more frequently in this period despite the lingering influence of the Kingdom of Wuyue because it was less laborious to engrave images and inscriptions such as the inscription of Buddha. Additionally, bronze mirrors were valued during this period because of the attention toward the imitation of the archaic bronze(仿古銅器) of the Song dynasty and the influence of the emperor. Moreover, it is believed that bronze mirrors were enshrined in pagodas as offerings as they were deemed valuable at the time. There was a change in the method of enshrining bronze mirrors in pagodas during the Kingdom of Wuyue and the Song dynasty. During this time, bronze mirrors that were positioned on the floor or in iron boxes were intentionally attached to walls or hung from the ceiling. This method was largely divided into two types: attaching to walls or the ceiling(嵌入鏡) and hanging from the ceiling(懸鏡). A typical example of hanging a bronze mirror from the ceiling can be seen in the Jingzhisa Temple Pagoda, and Teng County's Fushengsa Temple Pagoda contains an example of attaching a bronze mirror to the ceiling. The methods of hanging or attaching bronze mirrors to the ceiling were closely related to the methods employed in Chinese tombs. Song dynasty burial chambers had a high and wide structure, so to defend against evil spirits(辟邪用), bronze mirrors were used to protect the burial rooms. Bronze mirrors were, therefore, placed high to illuminate the burial room. This was achieved in the ways mentioned above. As underground chambers became wider and higher, mirrors also protected the important areas of the chambers and illuminated the interiors. Thus, it is believed that the methods of enshrining bronze mirrors in the pagodas during the Kingdom of Wuyue and the Song dynasty arose from the method of enshrining bronze mirrors in tombs at the time. Thereafter, pagodas, such as the Miaojuesa Temple Pagoda, in which the placement of a bronze mirror was actively considered from the design stage were constructed.

• Korean Association of Arts Management
• /
• no.49
• /
• pp.5-35
• /
• 2019

The main purpose of this study was to use semantic network analysis to examine the international trend of arts management and other studies pertinent to this field. The subject was based on 357 keywords listed on the abstract of 185 research papers in the International Journal of Arts Management. To examine the most current trends of arts management based studies the time frame was restricted from 2008 to 2017. To briefly summarize the result, first, 'museum' was the most frequently appeared keyword. This was followed by 'performing arts' and 'arts' with more than 20 appearances. 'Motion picture industry' and 'theater' were the next frequently appeared keywords. 'Customer behavior' and 'market strategy', keywords related to management, were also included in the high ranked group along with art related keywords. Second, yearly research trend shows that arts management has been regularly studied for past ten years with average of 19 research papers with about 53 keywords. Keywords such as 'museum' and 'performing arts' has been regularly studied for past ten years. 'Culture', 'theater' and 'motion pictures industry' does not regularly appear in the result of yearly research trend but nevertheless they have sparsely made an appearance along the past decade. 'Art gallery' has not been cited till 2011 but from 2012 it was regularly and continuously made an appearance in the yearly research trend. Overall, the yearly trend result shows that the trend of international arts management studies within IJAM, was at first centered on fine arts but as the time passed there has been diversified keywords related to management. Third, 'performing art' and 'art' has the highest link frequency(34). Fourth, density result was 0.039 which shows that the keyword density is not very high. Fifth, 'art', 'performing art', 'museum', 'theater' and 'brand' were positioned in the middle when looking at the visualized version of centrality result. This means that these five keywords has the highest centrality among other keywords.

• The korean journal of orthodontics
• /
• v.30 no.5 s.82
• /
• pp.613-623
• /
• 2000

The purpose of this study was to amount of the frictional forces with the brackets and wires, ligation methods, dry/wet, offsets, interbracket distances, velocity and to compare them each other by different conditions. This study tested 0.018'x0.025' slot sized 8 types of orthodontic bracket systems and 0.016', 0.016'x0.022' sized stainless steel, NiTi, Cu-NiTi orthodontic wires. One cuspid bracket were positioned on the slide glass and archwire was engaged into bracket and ligated with elastomeric modules. The values of frictional forces were measured with the instron universal testing machine. The results were as follows; 1. Polycrystalline ceramic bracket had the highest mean frictional forces and followed and by ceramic reinforced plastic bracket, metal bracket, plastic bracket with metal slot, monocrystalline ceramic bracket, single bracket, self-ligating bracket, friction free bracket in descending order. The self-ligating bracket showed low frictional forces in the round wires and high frictional forces in the rectangular wires. 2. Stainless steel wires had the least frictional forces and followed by NiTi, Cu-NiTi wires in descending order. Round wires had lower frictional forces then that of rectangular wires. 3. The stainless steel ligation method had significantly greater mean frictional forces them the elastomeric module ligation method. 4. Artificial saliva statistically increased the frictional forces in stainless steel wire, NiTi wire and Cu-NiTi wire. 5. There was a statistically significant difference with offset change 6. There was no statistically significant difference with interbracket distance in stainless steel wires but a significant difference in NiTi wires as the interbracket was decreased. 7 There was no statistically significant difference with velocity change. From the above findings, self-ligating bracket, stainless steel wires and the elastomeric module ligation method might be effective than any other materials to reduce the frictional forces in the orthodontic treatment and can be correlated to clinical situations seen in orthodontic patient care.

• The Journal of Korean Academy of Prosthodontics
• /
• v.51 no.3
• /
• pp.183-189
• /
• 2013

Purpose: The aim of this study was to evaluate clinical outcomes of implant supported fixed-hybrid prostheses (FHP) in the fully edentulous arches. Materials and methods: Patients in this retrospective study were restored with fixed-hybrid prostheses supported by 4 to 6 implants and functioned more than 1 year of loading. Outcome measures were marginal bone change of implant related with sex, anatomical location (maxilla vs. mandible), opposing teeth, loading time of patients, tilting of posterior implant by Mann- Whitney U test and cantilever length of superstructure by regression analysis, and complication rates. Significance level was set P<.05. Results: A total number of 84 implants (16 restorations) placed in 16 patients were observed for 28 months and mean marginal bone loss was $0.53{\pm}0.39mm$. There were no differences of marginal bone loss according to sex, anatomical location (maxilla vs. mandible), opposing teeth, loading time of patients (P>.05), and cantilever length was not significantly related with a marginal bone loss of implant next to cantilever (P>.05). Complication was shown in 11 patients and veneer fracture and dislodging of artificial teeth were most prevalent. Conclusion: Within the limitations of this study, although marginal bone loss of FHP was very little, complication rates were high. Irrespective of tilting of most posterior implants, marginal bone loss of most posterior implants next to cantilever was less than those of the other implants positioned anteriorly. Cantilever length (<17 mm) did not affect a marginal bone loss of most posterior implants.

• Journal of Korea Soil Environment Society
• /
• v.2 no.2
• /
• pp.81-94
• /
• 1997

In many solute transport studies, either flux or resident concentration has been used. Choice of the concentration mode was dependent on the monitoring device in solute displacement experiments. It has been accepted that no priority exists in the selection of concentration mode in the study of solute transport. It would be questionable, however, to accept the equivalency in the solute transport parameters between flux and resident concentrations in structured soils exhibiting preferential movement of solute. In this study, we investigate how they differ in the monitored breakthrough curves (BTCs) and transport parameters for a given boundary and flow condition by performing solute displacement experiments on a number of undisturbed soil columns. Both flux and resident concentrations have been simultaneously obtained by monitoring the effluent and resistance of the horizontally-positioned TDR probes. Two different solute transport models namely, convection-dispersion equation (CDE) and convective lognormal transfer function (CLT) models, were fitted to the observed breakthrough data in order to quantify the difference between two concentration modes. The study reveals that soil columns having relatively high flux densities exhibited great differences in the degree of peak concentration and travel time of peak between flux and resident concentrations. The peak concentration in flux mode was several times higher than that in resident one. Accordingly, the estimated parameters of flux mode differed greatly from those of resident mode and the difference was more pronounced in CDE than CLT model. Especially in CDE model, the parameters of flux mode were much higher than those of resident mode. This was mainly due to the bypassing of solute through soil macropores and failure of the equilibrium CDE model to adequate description of solute transport in studied soils. In the domain of the relationship between the ratio of hydrodynamic dispersion to molecular diffusion and the peclet number, both concentrations fall on a zone of predominant mechanical dispersion. However, it appears that more molecular diffusion contributes to the solute spreading in the matrix region than the macropore region due to the nonliearity present in the pore water velocity and dispersion coefficient relationship.

• Journal of Soil and Groundwater Environment
• /
• v.18 no.4
• /
• pp.19-31
• /
• 2013

To figure out the decay characteristics of naturally occurring radionuclides, eight sampled groundwaters from a monitoring borehole having high levels of uranium and radon concentrations in a two mica granitic area have analyzed by liquid scintillation counters (LSC) for over 1 year. In December 2011, three groundwater samples (DJ1, DJ2, DJ3) were obtained from each aquifer system located at -20 m, -40 m, -60 m of the monitoring borehole below the ground surface, respectively. Five samples (DJ4, DJ5, DJ6, DJ7, DJ8) were additionally gained from each aquifer positioned -20 m, -40 m, -60 m, -100 m, -105 m of the borehole in February 2012, respectively. Temporal variation characteristics of uranium and radon concentrations have showed over maximum 2.1 times and 1.4 times fluctuations of the values in the same sampling intervals over time, respectively. The intervals of -40 m and -105 m in the borehole have the highest values of uranium and radon concentrations, respectively. This may imply that the concentrations of naturally occurring radionuclides such as uranium and radon in groundwater have been changed over time and indicate that the qualities of groundwaters from the aquifers developed at each interval in the borehole are different each other. This discrepancy, moreover, could be caused by behaviour differences between uranium which is in ionic status having a half life of 4.6 billion years and is transported along with the flowing groundwater, and radon which is in gaseous status having a 3.82 day's half life in the aquifer systems. Physicochemical characteristics of groundwaters from the aquifer systems could be identified by the results of the on-situ measuring items such as pH and Eh, and the major ionic contents. The CPM values of eight groundwater samples analysed by LSC over one year have shown not to follow the theoretical decay curve of the radon. The CPM values of the samples have ranged from 2 to 7.5 after it had passed two months when the theoretical CPM values of the radon started zero since the initial analysis. Alpha and beta particle spectrums have shown the peaks of radium-226, however they have not revealed any peaks of radon and it's daughter products such as polonium-218 and 214, bismuth-214 for the late stage of the analysis. This implies that the groundwater from the borehole may contain radium-226 having a half life of 1,600 years which decays continuously.

• Journal of the Korean Institute of Landscape Architecture
• /
• v.41 no.6
• /
• pp.147-157
• /
• 2013

The purpose of this study was to determine the correlation between wetland visitors' consciousness of ecology and their needs and thereby, provide for some effective measures to manage them. For this purpose, 3 study points were set up: "wetland visitors' consciousness of ecology and their needs", "differences of such consciousness depending on their demographic variables" and the "relationship between such consciousness and their needs". To this end, Upo Wetland visitors were surveyed for an empirical analysis. The visitors' awareness about ecology was measured with Dunlap's 15-item NEP Inventory, while their needs were analyzed in reference to Maslow's 7-Step Human Desire Ladder. The survey was conducted at Upo Wetland for 3 days, and as a result, a total of 228 questionnaires were returned. The results of this study can be summarized as follows; First, the visitors' consciousness of ecology and their needs were higher than the normal level. In terms of their consciousness of ecology, their awareness of the ecological crisis potential and anti-humanism was highest. In terms of their needs, the aesthetic need was highest, followed by the cognitive one. On the other hand, the needs for self-achievement and self-esteem were lowest; except them, the higher the needs were positioned at Maslow's ladder of desire, and subjects were more responsive to them. As a result of analyzing the correlation between the subjects' consciousness of ecology and their needs, it was found that the correlation was negative in some sub-areas, while being positive in other sub-areas. After all, the ratio of the sub-areas having a positive correlation was as 3 times high as that of the sub-areas having a negative correlation. Even as for the correlation coefficient values, they were higher in the positive sub-areas, which suggests that the correlation between wetland visitors' consciousness of ecology and their needs were positive, although at a lower level, in overall terms. As a result of comparatively analyzing visitors' needs by dividing them into 3 sub-groups depending on the levels of their consciousness of ecology, it was found that the higher their consciousness of ecology was, their needs were higher. Overall, wetland visitors' awareness of ecology was higher than the normal level, and it was estimated that such awareness would continue to increase. Hence, it could be inferred that their needs, particularly, their aesthetic and cognitive ones would continue to increase, too. Accordingly, it is deemed important to manage the wetland landscape making use of its visual resources, while continuing to provide the visitors with the contents fulfilling their need for knowledge.

• Investigative Magnetic Resonance Imaging
• /
• v.18 no.1
• /
• pp.52-58
• /
• 2014

Purpose : To establish a pH measurement system for a mouse tumor study using a clinical scanner, to develop the $^1H$ and 31P radio frequency (RF) coil system and to test pH accuracy with phantoms. Materials and Methods: The $^1H$ and the $^{31}P$ surface coils were designed to acquire signals from mouse tumors. Two coils were positioned orthogonally for geometric decoupling. The pH values of various pH phantoms were calculated using the $^1H$ decoupled $^{31}P$ MR spectrum with the Henderson-Hasselbalch equation. The calculated pH value was compared to that of a pH meter. Results: The mutual coil coupling was shown in a standard $S_{12}$. Coil coupling ($S_{12}$) were -73.0 and -62.3 dB respectively. The signal-to-noise ratio (SNR) obtained from the homogeneous phantom $^1H$ image was greater than 300. The high resolution in vivo mice images were acquired using a $^{31}P$-decoupled $^1H$ coil. The pH values calculated from the $^1H$-decoupled $^{31}P$ spectrum correlated well with the values measured by pH meter ($R^2$=0.97). Conclusion: Accurate pH values can be acquired using a $^1H$-decoupled $^{31}P$ RF coil with a clinical scanner. This two-surface coil system could be applied to other nuclear MRS or MRI.

• Journal of the Korean Society for Marine Environment & Energy
• /
• v.15 no.1
• /
• pp.9-18
• /
• 2012

Annual power consumption of our country is positioned in the upper percentile in the world, and because the proportion of fossil power generation is high, which ranks the 10th $CO_2$ emission country. In this regard, government has established and is implementing the National Energy Basic Plan to realize to get out of fossilization in energy supply while focusing on securing the technology for renewable energy as well as its commercialization in order to reduce greenhouse gas. Resource recovery technology for deep seawater thermal energy which is one of renewable energies is newly getting attention domestically as well as in overseas for securing resources and environmental improvement as a core technology for multilateral use of marine resources for low carbon and green growth. Economic feasibility analysis was conducted for the research and development as follows on the use of ocean thermal energy conversion and seawater air conditioning. First, in the case of power generation using deep seawater and warm discharge water from ocean thermal energy conversion plant of 1MW level, it is judged that the economic feasibility is insufficient but the feasibility will be significantly improved if we consider not only power generation but also drinking water and certified emission reduction by developing the power plant to the size for commercialization. Second, the economic feasibility for the use of deep seawater as air conditioning for the power plant of 1,000RT level turned out to be very good. Especially, when we consider certified emission reduction, it will be possible to secure sufficient economic feasibility. When we use it in connection with ocean thermal energy conversion, water conversion and agricultural and fishery use, it is judged that economic ripple effect will be significant and therefore it will be necessary to conduct research and development for early commercialization, distribution and diffusion of deep seawater energy.