• Journal of Advanced Marine Engineering and Technology
• /
• 제36권3호
• /
• pp.358-367
• /
• 2012

A study on tidal turbine using CFD simulation has been an economical and reliable method. However, large flow fields with multi-turbine arrays require high computer performance. Actuator disc theory therefore is widely applied. Actuator disc is the concept that imitates actual turbine by means of an energy absorption disc which has the same dimension and characteristics. Turbines installed in array may have disturbance effects on one another. Thus, the subject of this study is to analyze the far wake of these tidal turbines and compare to single turbine case. The main objects are to analyze two turbines positioned longitudinally at different spaces.

• 한국광학회지
• /
• 제18권1호
• /
• pp.56-65
• /
• 2007

이득 분산이 두 개의 복소 결합 DFB 영역과 위상조정 영역으로 구성되는 다중 영역 복소 결합 DFB 레이저에서 발진하는 두 모드의 비팅에 의한 self-pulsation (SP) 주파수와 출력 파워의 변조지수에 미치는 영향에 대하여 살펴보았다. 능동 영역의 이득이 최대가 되는 파장을 두 DFB 영역의 발진 모드의 파장 중심 또는 브래그 파장 중심에 위치시킨 경우가 특정 DFB 영역의 발진 모드의 파장 또는 브래그 파장에 위치시킨 경우에 비하여 두 DFB 영역의 브래그 파장 차이, ${\Dalta}{\lambda}_{B}$, 증가에 따른 두 발진 모드가 받는 이득 차이가 적게 발생하여 최대 SP 주파수가 크고, 변조지수 특성도 좋음을 볼 수 있었다. 또한 능동 영역의 이득이 최대가 되는 파장을 두 DFB 영역의 브래그 파장 중심에 위치시키는 경우가 발진 모드의 파장 중심에 위치시키는 경우에 비하여 더 큰 최대 SP 주파수를 얻을 수 있었고 변조지수 특성도 더 우수함을 볼 수 있었다.

• 대한기계학회논문집B
• /
• 제31권3호
• /
• pp.283-291
• /
• 2007

The static pressure distribution, atomization characteristics and velocity distribution of tapered nozzle swirl spray is analyzed and then compared with original swirl spray. The static pressure distribution inside the swirl spray is measured using a piezoresistive pressure transducer. Phase Doppler anemometry (PDA) is applied to measure and analyze the droplet size and velocity distribution of tapered nozzle and original swirl spray. The static pressure inside the spray shows the lower value compared to the atmospheric pressure and this pressure drop is getting attenuated as the taper angle is increased. The droplet size of tapered nozzle spray shows similar value compared to the original swirl spray at the horizontal mainstream while it shows increased value at vertical mainstream. The deteriorated atomization characteristics of tapered nozzle spray is improved by applying high fuel temperature injection without causing the spray collapse. The velocity results show that the larger portion of fuel is positioned with higher injection velocity, and the smaller portion of fuel is positioned with lower injection velocity with causing spatially non-uniform mixture distribution.

• 복식문화연구
• /
• 제2권1호
• /
• pp.123-143
• /
• 1994

The aim of this research analyze women's preference in types and formation of skirt lines by their ages and body shapes. The aim of this study is for women to select clothing which can cover their shortcomings and to present the practical and positive data about skirt design to clothing maker. The results of this research are summarized as followed : Tight skirt is the beest preferred and flare is the next. Narred silhouettes re preferred about th width of each kind of skirt, but as for the gored and flare skirts middle-width silhouettes are preferred. Preferred lengths of the skirts are different from ages; the middle like minilines, the thirties like miniline, the thirties and the forties natural line, and the fifties midiline, and according to body shapes, the skinny or standard shape like natural line and the fat midiline. All age prefer natural waist line, and twenties and the skinny like high waist line and belt compared to fifties and the fat. All ages like dart-treated skirt waist and wrinkle-decoration with narrow vertical lines or tuck-decoration with narrow horizontal line. White and blue are preferred colors of skirts in spring and summer, the skinny and the standard like blue, whereas the fat like black. All ages like soft materials and one-colored skirts without patterns Adult women like jipper to open waist of a skirt. Most of them like back positioned one, but fifties and the fat prefer side positioned ones.

• 대한금속재료학회지
• /
• 제49권12호
• /
• pp.977-982
• /
• 2011

Migration and interaction of multi-protons in a zinc-doped barium zirconate (Zn-doped $BaZrO_3$) super cell were investigated using a density functional theory. O ions in the super cell form interconnected octahedrons with Zr or Zn ions positioned in their centers and Ba ions positioned among the eight octahedrons. When one proton was added to the super cell, the energy barrier of 0.80 eV for proton transfer from the first to second nearest O ion sites from the Zn ion reached its highest value. When two protons were added to the super cell, the two protons preferred the first nearest O ions from the Zn ion. The two protons were accommodated by pushing the neighboring Zn ion further away from the center of the octahedron. Energy barriers for proton transfer from the Zn-octahedron to the neighboring Zr-octahedron were spread in the range of 0.36 ~ 1.02 eV.

• 대한소아치과학회지
• /
• 제31권4호
• /
• pp.665-670
• /
• 2004

영구치의 맹출지연이 발생하는 원인은 다양하다. 유치의 만기 잔존과 조기 상실, 과잉치나 치아종과 같은 이형물의 존재등과 같이 비정상적인 경조직 인자에 의해 발생할 수 있고, 치은 판개 조직(opercula)과 같은 상부 치은 조직의 섬유성 비후나 소대의 과증식과 같은 연조직성 인자에 의해 발생하기도 한다. 영구치의 맹출지연시의 공간의 상실 및 영구치의 비정상적인 맹출 그리고 그에 따른 치열궁의 비대칭과 같은 교정적 문제와 대합치의 정출 등에 의한 교합적인 문제 등이 발생할 수 있어 조기에 진단하여 처치하는 것이 중요하다. 본 증례에서는 12세 남자아이가 충치가 많고 치아가 나오지 않는다는 것을 주소로 내원하여 진단한 결과, 하악 좌측 소구치들이 맹출하지 못하고 매복되어 있는 것을 알 수 있었다. 원인은 맹출 공간이 부족하였고 동시에 거대 협소대가 치아의 맹출을 방해하는 것으로 파악되었다 이에 대한 처치로 우선 공간을 획득하고 난 후, 부착치은의 회복과 맹출 촉진을 위해 근단 변위부분층 판막술을 시행하였다.

• 한국세라믹학회지
• /
• 제29권4호
• /
• pp.305-311
• /
• 1992

As compared with conventional sintering, rapid heating in microwave system could enhance sinterability and final properties of alumina with a very short sintering time. In this study microwave sintering was performed using zirconia brick as a reaction chamber which was positioned in a 2.45 GHz(700 W) multimode microwave cavity. Microwave-sintered alumina showed high density and smaller grain size than conventionally sintered alumina because the ratio of densification rate/grain growth rate was increased by rapid heating.

• 한국정밀공학회지
• /
• 제20권6호
• /
• pp.214-221
• /
• 2003

Tension mask assembly is positioned right behind the glass-made front panels of CRT type display devices. The frame-supported thin metal sheet contains numerous slits, through which electron beams are focused to enhance definition. Pretension is imposed on the masks, especially for enlarged flat screens, in order to avoid vibration due to acoustic or mechanical impact. High temperature assembly process subsequent to pretensioning, however, degenerates the creep resistance of common mask materials, and if tensile stress is high enough, tension on the mask may be loosened substantially due to creep deformation. In this study, the assembly is modeled as a combined structure of beams and wire array, and a numerical simulation is attempted for pretensioning followed by high temperature process. According to a model study, small amount of creep strain is likely to be generated, but its adverse influence is not negligible. Some structural modification measures to reduce the creep-induced tension loosening are proposed and evaluated. Also, optimal configuration of frame structure is sought for, which maintains high tension of masks and minimizes the possible creep of frame simultaneously.

• 전기전자학회논문지
• /
• 제22권2호
• /
• pp.420-426
• /
• 2018

가까운 미래에, 전자의 ballastic 혹은 near-ballastic 이동이 가능한 CNT(Carbon NanoTube)를 활용한 CNTFET(Carbon NanoTube Field Effect Transistor)은 현재의 실리콘 기반 트랜지스터를 교체할 유력한 후보 중 하나로 고려되고 있다. 고성능의 CNTFET으로 대규모 집적회로를 구현하기 위해서는 semiconducting CNT가 CNTFET 안에 동일한 간격과 높은 밀도로 정렬되어 배치되어야 하지만, CNTFET 공정의 미성숙으로, CNTFET 안의 CNT는 불규칙하게 배치하게 되고, 현존하는 HSPICE 라이브러리 파일은 불규칙한 CNT 배치에 의한 성능의 변화를 회로 레벨에서 평가할 수 있는 기능을 지원하지 않는다. 이러한 성능의 변화를 평가하기 위해서 선형 프로그래밍을 활용한 방법이 과거에 제안되었으나, CNTFET의 전류와 게이트 커패시턴스를 계산하는 과정에서 오차가 발생할 수 있는 문제점이 있다. 본 논문에서는 언급한 오차가 발생되는 이유에 대해서 자세히 논하고, 이 오차를 줄일 수 있는 새로운 방법을 제시하고자 한다. 시뮬레이션 검토 결과, 새롭게 제시된 방법이 기존 방법의 오차, 7.096%를 3.15%까지 줄일 수 있음을 보이고 있다.

• Journal of Periodontal and Implant Science
• /
• 제28권2호
• /
• pp.321-337
• /
• 1998

The aims of this study were firstly to investigate soft tissue reactions around single implant-supported crowns and secondly to compare soft tissue dimensions and conditions of the crowns in relation to interdental papillae, and lastly to investigate patients'esthetic satisfaction with their single implant-supported crowns according to the interdental papillae presence/absence. Twenty-nine patients (41 implants) whose single missing tooth in the maxillary anterior region had been replaced by single implant-supported crown participated for the study and various variables of soft tissue conditions, dimensions and crown dimensions were measured around the single implant-supported crowns at clinical examination and from study models and slides. The results showed that the soft tissue conditions around the single implantsupported crowns were similar to those around implants used for partially or totolly edentulous patients. Except for the high frequency of bleeding on probing, all other parameters revealed healthy conditions. The buccal sites of the crown had a shallow pocket comparing with other sites. At all sites of the crown, similar status of little inflammation was found. Mesial sites and central-incisor positioned implantsupported crowns had lower contact point position than distal sites and lateral-incisor positioned crowns, respectively. Mucositis index, probing depth and contact point position were significantly correlated with papillae index(p < 0.05). More inflammation and lower contact point position were found at the implant-supported crown with no interdental space than that with interdental space. Patients showed high esthetic satisfaction regardless of interdental space presence. The result indicated that, despite of their submucosal crown margins, single implantsupported crowns have soft tissue conditions as good as other implants used for the treatment of the different types of edentulism and a clinician can manipulate interdental papilla height by modifying crown shapes within the limits of not violating total esthetics.