• Phonetics and Speech Sciences
• /
• v.3 no.3
• /
• pp.35-47
• /
• 2011

The purpose of this study is to examine the influence of Chinese high and level vs. rising tone on the pitch pattern of corresponding Sino-Korean words delivered by Chinese learners of Korean and to examine the aspects how these two tones of corresponding Chinese words affect the pitch patterns of Sino-Korean words. Scope of this research is limited to the Chinese learners of Korean, especially when they pronounce same-form-same-meaning Sino-Korean words. In this study, Chinese learners pronounced both Chinese words and corresponding Sino-Korean words. By using the software learners' pitch pattern were recorded, analyzed, and compared with the tone of corresponding Chinese words. Experimental results showed that Sino-Korean words were affected by Chinese 'high and level tone - high and level tone', 'high and level tone - rising tone', 'high and level tone - falling-rising tone', 'high and level tone - falling tone' and 'rising tone - falling tone' when they started with lenis sounds. On the other hand when Sino-Korean words started with aspirated sounds they were affected by Chinese 'rising tone - high and level tone', 'rising tone - rising tone', 'rising tone - falling-rising tone', 'rising tone - falling tone'. In conclusion, the Chinese learners' pitch patterns of Sino-Korean words are affected by both Chinese high and level & rising tone, especially when Sino-Korean words started with lenis sounds they were more affected by Chinese high and level tone, on the other hand Chinese rising tone influence Sino-Korean words more when they were started with aspirated sounds.

• Speech Sciences
• /
• v.11 no.1
• /
• pp.73-83
• /
• 2004

Electromyographic studies of the cricopharyngeus muscle using hooked wire electrodes were performed in thyroidectomized patients. The shape of the cricoid cartilage and soft tissue thickness in the postcricoid area were evaluated during pitch elevation and pitch lowering using conventional neck lateral films. The cricopharyngeus muscle simultaneously activated in the initial task of speech and continuously activated. Its activity lessened in the interrogative stress contrast of sentence terminals and increased in the pitch lowered contrast of sentence terminal. On the radiologic findings the cricoid cartilage was tilted backward during high pitched phonation and tilted forward during low pitched phonation. The soft tissue thickness of postcricoid area was thicker at the low pitch than at high pitch. At low pitch the cricoid cartilage paralleled along the vertebral column. This result suggests that the bulging of cricopharyngeus muscle in contraction induce a thickened the postcricoid area thickened, and exert pressure anteriorly exerted on the cricoid cartilage. This contraction of the cricopharyngeus muscle may result in shortening the vocal fold and lowering pitch.

• Journal of the Korean Institute of Telematics and Electronics
• /
• v.17 no.4
• /
• pp.38-44
• /
• 1980

We present a high speed pitch estimation algorithm that is based on peak detection and average magnitude difference function (AMDF). A few pitch candidates are first estimated from the low-pass filtered (800 Hz) speech by a peak detection algorithm. AMDF values of the pitch candidatestare then calculated, and the pitch candidate that yields the minimum AMDF value is chosen as the desired pitch period. The new method requires far less computation time than other pitch estimation algorithms, while it yields fairly accurate results.

• The KSFM Journal of Fluid Machinery
• /
• v.15 no.2
• /
• pp.36-40
• /
• 2012

Pitch control of wind turbine is activated above rated wind speed for the purpose of rated power regulation. When we design pitch controller, its gain-scheduling is essential due to nonlinear characteristics of aerodynamic torque. In this study, 2-mass model including a vibration mode of drive-train for a 2 MW wind turbine is considered and pitch control with gain-scheduling using a linearization analysis of the nonlinear aerodynamic torque is applied. Some simulation results for the pitch gain-scheduling under step wind speed are presented and investigated. It is shown that gain-scheduling in pitch control is important especially in the region of high wind speeds when there exists a vibration mode of drive-train.

• Korean Journal of Materials Research
• /
• v.25 no.6
• /
• pp.279-287
• /
• 2015

In order to prepare anode materials for high power lithium ion secondary batteries, carbon composites were fabricated with a mixture of petroleum pitch and coke (PC) and a mixture of petroleum pitch, coke, and natural graphite (PC-NG). Although natural graphite has a good reversible capacity, it has disadvaantages of a sharp decrease in capacity during high rate charging and potential plateaus. This may cause difficulties in perceiving the capacity variations as a function of electrical potential. The coke anodes have advantages without potential plateaus and a high rate capability, but they have a low reversible capacity. With PC anode composites, the petroleum pitch/cokes mixture at 1:4 with heat treatment at $1000^{\circ}C$ (PC14-1000C) showed relatively high electrochemical properties. With PC-NG anode composites, the proper graphite contents were determined at 10~30 wt.%. The composites with a given content of natural graphite and remaining content of various petroleum pitch/cokes mixtures at 1:4~4:1 mass ratios were heated at $800{\sim}1200^{\circ}C$. By increasing the content of petroleum pitch, reversible capacity increased, but a high rate capability decreased. For a given composition of carbonaceous composite, the discharge rate capability improved but the reversible capacity decreased with an increase in heat treatment temperature. The carbonaceous composites fabricated with a mixture of 30 wt.% natural graphite and 70 wt.% petroleum pitch/cokes mixture at 1:4 mass ratio and heat treated at $1000^{\circ}C$ showed relatively high electrochemical properties, of which the reversible capacity, initial efficiency, discharge rate capability (retention of discharge capacity in 10 C/0.2 C), and charge capacity at 5 C were 330 mAh/g, 79 %, 80 %, and 60 mAh/g, respectively.

• Journal of the Semiconductor & Display Technology
• /
• v.7 no.4
• /
• pp.23-28
• /
• 2008

A high speed automated pitch variation unit (HAPU) related to semiconductor category sorting movement of the test handler system was developed. In the design process, 'DMADOV' step of 6-Sigma method has been applied. The design result for the desirable pitch variation was a 3:1 reduction rack-pinion and a linkage which are operated by servomotors. The realization and reliability of the mechanism was obtained at the design stage by FEM analysis, and by robust design using Taguchi orthogonal array against weight and deformation. Finally, the validity of the high speed variation mechanism was confirmed via inspection using a high speed camera while performing pitch variation.

• Journal of the Korean Society for Industrial and Applied Mathematics
• /
• v.27 no.1
• /
• pp.75-86
• /
• 2023

The angle of attack is highly sensitive to pitch point in the airfoil shape and the decline of pitch point value induces smaller angle of attack, which implies that airfoil profile possessing closer pitch point to the airfoil tip reacts more sensitively to upcoming wind. The method of conformal transformation functions is employed for airfoil profiles and airfoil surfaces are expressed with a trigonometric series form. Attack angle and ideal lift coefficient distributions are investigated for various airfoil profiles in wind turbine blade regarding conformal transformation and pitch point. The conformed angle function representing the surface angle of airfoil shape generates various attack angle distributions depending on the choice of surface angle function. Moreover, ideal attack angle and ideal lift coefficient are susceptible to the choice of airfoil profiles and uniform loading area. High ideal attack angle signifies high pliability to upcoming wind, and high ideal lift coefficient involves high possibility to generate larger electric energy. According to results obtained pitch point, airfoil shape, uniform loading area, and the conformed airfoil surface angle function are crucial factors in the determination of angle of attack.

• 한국기계연구소 소보
• /
• s.15
• /
• pp.57-66
• /
• 1985

Fibers with a high degree of axial preferred orientation can be obtained from mesophase pitch. Prior to cabonization, the pitch fibers must be rendered in fusible so that their orientation is preserved. The stabilization of the pitch fibers was heated at temperature between $250^{circ}C$ and $300^{circ}C$ and a treatment time 5 to 80minutes. Oxidized fibers heated $1800^{circ}C$without stretching. Pitch based carbon fiber have a young's modulus as high as 304GN/$m^2$. The structure of the pitch cased carbon fiber is determining factor for the mechanical properties of the produced fibers. The structure depending on the pitch precursor as well as on the oxidation time.

• Speech Sciences
• /
• v.3
• /
• pp.132-147
• /
• 1998

Previously developed methods for pitch modification have not been based on the voice source model. Therefore, the synthesized speech often sounds unnatural although it may be highly intelligible. The purpose of this paper is to analyze the alteration of a voice source signal with pitch period and to establish the pitch-modification rule based on the result of this analysis. We examine the alteration of the interval of closing phase, closed phase and open phase using the excitation waveform as the pitch increases. In comparison to the previous methods which performed directly on the speech signal, the pitch modification method based on a voice source model shows high intelligibility and naturalness. This study might benefit the application to the speaker identification and the voice color conversion. Therefore the proposed method will provide high quality synthetic speech.

• 한국신재생에너지학회:학술대회논문집
• /
• 2009.11a
• /
• pp.627-627
• /
• 2009

In this work, the activated carbons (ACs) with high porosity were synthesized from pitch by KOH chemical activation. The structure and surface properties of ACs were characterized by means of elemental analysis, X-ray diffraction (XRD), and X-ray photoelectron spectroscopy(XPS). And, the influence of the KOH-to-pitch ratio on the porosity of the ACs was investigated using the nitrogen adsorption isotherms at 77 K and a scanning electron microscopy (SEM). As a result, pitch could be successfully converted into ACs with well-developed micro and mesopores. The specific surface areas and pore volumes were increased with an increase of the KOH-to-pitch ratio. Furthermore, it was found that the addition of KOH led to the transformation of the micropores to the meso- and macropores. In the application to electric double layer capacitors (EDLC), the pitch-based ACs showed a higher capacitance per weight and per volume, and an excellent electrochemical stability in the high voltage region.