• 한국통신학회논문지
• /
• 제34권11C호
• /
• pp.1076-1084
• /
• 2009

OFDM(Orthogonal Frequency Division Multiplexing) 전송 신호의 PAPR (Peak-to-Average Power Ratio)을 효과적으로 감소시키기 위하여 클리핑 잡음 (Clipping Noise)을 이용한 적응적 톤 삽입 (Adaptive Tone Injection; ATI) 기법을 제안한다. 제안된 ATI 기법은 기존 TI 방법에서의 복잡도 문제를 개선하기 위해, IFFT (Inverse Fast Fourier Transform) 출력 가운데 임계 진폭값 보다 큰 신호들을 클리핑 하는 과정, 클리핑된 신호에 대해 클리핑 잡음을 계산 후 주파수 영역 클리핑 잡음의 심벌 중에서 가장 큰 전력이 할당된 톤을 추출하는 과정, 추출된 톤을 확장된 성상도로 맵핑 후에 부분적으로 IFFT 하는 과정의 총 3단계로 구성된다. 모의실험 결과, 제안된 ATI 기법은 맵핑이 가능한 최적의 톤을 클리핑 잡음을 이용하여 추출함으로써 기존 TI 방법에서와는 달리 본래신호와 동일한 정보를 가지는 등가 신호의 가능한 모든 조합을 필요로 하지 않으며, OFDM PAPR 감소 성능 역시 최적의 TI 방법에 근접함을 보여준다.

• 대한음성학회:학술대회논문집
• /
• 대한음성학회 2006년도 추계학술대회 발표논문집
• /
• pp.88-91
• /
• 2006

Steered response power(SRP) based algorithm uses a focused beamformer which steers the array to various locations and searches for a peak in output power to localize sound sources. SRP-PHAT, a phase transformed SRP, shows high accuracy, but requires a large amount of computation time. This paper proposes an algorithm that clusters search spaces in advance to reduce computation time of SRP based algorithms.

• Journal of Power Electronics
• /
• 제12권3호
• /
• pp.429-438
• /
• 2012

This paper presents the use of a novel, single-stage high-power-factor electronic ballast with a symmetrical class-DE low-$d{\upsilon}$/$dt$ resonant rectifier as a power-factor corrector for fluorescent lamps. The power-factor correction is achieved by using a bridge rectifier to utilize the function of a symmetrical class-DE resonant rectifier. By employing this topology, the peak and ripple values of the input current are reduced, allowing for a reduced filter inductor volume of the EMI filter. Since the conduction angle of the bridge rectifier diode current was increased, a low-line current harmonic and a power factor near unity can be obtained. A prototype ballast, operating at an 84-kHz fixed frequency and a 220-$V_{rms}$, 50-Hz line input voltage, was utilized to drive a T8-36W fluorescent lamp. Experimental results are presented which verify the theoretical analysis.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2006년도 제37회 하계학술대회 논문집 D
• /
• pp.2063-2064
• /
• 2006

The power source of inverter welder stable power of low voltage and high current. Because if shouldn't be, it is caused to spark between the parent metal and the peak. So that, we designed to be base on high frequency transformer and reactor of DC part. Then, we optimized control of PWM, current rising slant, voltage, current, pulse current and inverter out-put voltage. Also we designed PCB for EMI and noises.

• 대한전자공학회논문지TC
• /
• 제47권1호
• /
• pp.10-18
• /
• 2010

Polar transmitter는 현재 GSM (Global System for Mobile Communications), EDGE (Enhanced Data Rates for GSM Evolution), GPRS (General Packet Radio Service) 등과 같은 협대역 통신 방식에만 주로 적용되고 있다. 본 논문에서는 polar transmitter를 OFDM (Orthogonal Frequency Division Multiplexing)과 같은 광대역 통신방식에 적용하기 위해 OFDM 통신 시스템이 가지고 있는 높은 PAPR (Peak-to-Average Power Ratio)을 감소시킬 수 있는 windowed-sinc 함수 기반의 PAPR 감소기법을 제안한다. 이 방법은 기존의 피크 윈도잉 (peak windowing) 기법에서 매우 인접한 여러 개의 피크들 또는 주변 신호에 비해 상대적으로 큰 피크에 의해 발생하는 과도한 신호 왜곡 효과를 완화시킨다. 다양한 윈도우 형태와 길이를 적용하여 비트오율 (Bit Error Rate; BER)과 오차 벡터 크기 (Error Vector Magnitude; EVM)를 측정한 결과, 제안된 기법은 기존의 피크 윈도잉 기법과 유사한 스펙트럼 성능을 가지면서 비트오율의 향상 및 PAPR 감소 성능이 우수함을 나타내었다.

• Journal of Periodontal and Implant Science
• /
• 제52권1호
• /
• pp.77-87
• /
• 2022

Purpose: This pilot study assessed the immediate in vivo effect of high peak pulse power neodymium-doped yttrium aluminum garnet (Nd:YAG) laser monotherapy on selected red/orange complex periodontal pathogens in deep human periodontal pockets. Methods: Twelve adults with severe periodontitis were treated with the Laser-Assisted New Attachment Procedure (LANAP®) surgical protocol, wherein a free-running, digitally pulsed, Nd:YAG dental laser was used as the initial therapeutic step before mechanical root debridement. Using a flexible optical fiber in a handpiece, Nd:YAG laser energy, at a density of 196 J/cm² and a high peak pulse power of 1,333 W/pulse, was directed parallel to untreated tooth root surfaces in sequential coronal-apical passes to clinical periodontal probing depths, for a total applied energy dose of approximately 8-12 joules per millimeter of periodontal probing depth at each periodontal site. Subgingival biofilm specimens were collected from each patient before and immediately after Nd:YAG laser monotherapy from periodontal pockets exhibiting ≥6 mm probing depths and bleeding on probing. Selected red/orange complex periodontal pathogens (Porphyromonas gingivalis, Tannerella forsythia, Prevotella intermedia/nigrescens, Fusobacterium nucleatum, Parvimonas micra, and Campylobacter species) were quantified in the subgingival samples using established anaerobic culture techniques. Results: All immediate post-treatment subgingival biofilm specimens continued to yield microbial growth after Nd:YAG laser monotherapy. The mean levels of total cultivable red/orange complex periodontal pathogens per patient significantly decreased from 12.0% pretreatment to 4.9% (a 59.2% decrease) immediately after Nd:YAG laser monotherapy, with 3 (25%) patients rendered culture-negative for all evaluated red/orange complex periodontal pathogens. Conclusions: High peak pulse power Nd:YAG laser monotherapy, used as the initial step in the LANAP® surgical protocol on mature subgingival biofilms, immediately induced significant reductions of nearly 60% in the mean total cultivable red/orange complex periodontal pathogen proportions per patient prior to mechanical root instrumentation and the rest of the LANAP® surgical protocol.

• Journal of electromagnetic engineering and science
• /
• 제7권1호
• /
• pp.1-6
• /
• 2007

Recently, Mc(Multi-code) modulation/demodulation(modem) technique has been explored for high speed data transmission in wireless environment. The conventional Mc modem generates some side effects such as allocating Walsh codes, which motivates to propose a novel Mc modem method with sub-code. Our proposed system should expanded the size of sub-code to provide high-rate data transmission, which also affect adversely to the performance of the system with high PAPR(Peak to Average Power Ratio). Thus, in this paper, we propose a novel pre-coded Multi-Dimensional HCOC(High Capacity Orthogonal Code) Mc modem technique to reduce the high PAPR, which enables the performance improvement. This proposed system can be easily designed by concatenating HCOC Mc modem with the generic Mc modem. The pre-coding technique that is used in this paper is CAC(Constant Amplitude Coding), that helps the system maintain the constant transmission power and reduce the maximum transmission power.

• ETRI Journal
• /
• 제30권4호
• /
• pp.612-614
• /
• 2008

A novel linear switched termination active cross-coupled low-voltage differential signaling (LVDS) transceiver operating at 1.5 GHz clock frequency is presented. On the transmitter side, an active cross-coupled linear output driver and a switched termination scheme are applied to achieve high speed with low current. On the receiver side, a shared pre-amplifier scheme is employed to reduce power consumption. The proposed LVDS transceiver implemented in an 80 nm CMOS process is successfully demonstrated to provide a data rate of 6 Gbps/pin, an output data window of 147 ps peak-to-peak, and a data swing of 196 mV. The power consumption is measured to be 4.2 mW/pin at 1.2 V.

• 대한기계학회논문집
• /
• 제16권1호
• /
• pp.1-12
• /
• 1992

본 연구에서는 가공기 자체의 파라메터와 성능에 관한 연구로서 출력 에너지 가 서로 다른 가공기를 사용하여 SUS 304 스테인리스 시험편을 관통, 절단하면서 출력 에너지와 최대 출력을 비교하여 보고, 시험편 관통시 주파수와 출력 에너지와의 관계, 시험편 관통시 응융 금속 제거량에 의한 절단 속도의 예측, 서로 다른 출력의 가공에 있어서 슬릿 절단 폭, 커프 폭, 드로스 길이, 절단면의 표면 거칠기 등을 비교하여 출 력차에 따른 가공 특성을 고찰하였다.

• Journal of Welding and Joining
• /
• 제31권2호
• /
• pp.57-62
• /
• 2013

Magnesium has good castability and limited workability, so its products have been manufactured by almost casting processes. In this study, a pulsed Nd:YAG laser was used to butt-weld the sand casting magnesium alloys. And the effect of welding conditions such as peak power, pulse width, welding speed was evaluated in detail. As a result of this study, large underfill and plenty of spatter taken place under the conditions with high peak power. Thus, it is recommended to use low peak power and long pulse width to obtain good welds with deep penetration. It is also confirmed that the welding speed and pps(pulse per second) are directly connected at weld defects such as underfill, porosity.