• Journal of Environmental Science International
• /
• v.25 no.5
• /
• pp.683-694
• /
• 2016

Sensitivity analysis of the WRF model according to the impact of nudging (e.g., nudging techniques and application domains) was conducted during high nocturnal ozone episode to improve the prediction of the regional ozone concentration in the southeastern coastal area of the Korean peninsula. The analysis was performed by six simulation experiments: (1) without nudging (e.g., CNTL case), (2) with observation nudging (ONE case) to all domains (domain 1~4), (3) with grid nudging (GNE case) to all domains, (4)~(6) with grid nudging to domain 1, domain 1~2 and domain 1~3, respectively (GNE-1, GNE-2, GNE-3 case). The results for nudging techniques showed that the GNE case was in very good agreement with those observed during all analysis periods (e.g., daytime, nighttime, and total), as compared to the ONE case. In particular, the large effect of grid nudging on the near-surface meteorological factors (temperature, relative humidity, and wind fields) was predicted at the coastline and nearby sea during daytime. The results for application domains showed that the effects of nudging were distinguished between the meteorological factors and between the time periods. When applied grid nudging until subdomain, the improvement effects of temperature and relative humidity had differential tendencies. Temperature was increased for all time, but relative humidity was increased in daytime and was decreased in nighttime. Thus, GNE case showed better result than other cases.

• Journal of the Korean Ceramic Society
• /
• v.39 no.9
• /
• pp.840-845
• /
• 2002

As an ozone gas sensor, the semiconductor gas sensor which is cheap, portable and simple in use and has a high sensitivity and an excellent selectivity, has been known as an alternative. In the present study, ITO ($In_2O_3 95%,\;SnO_2$ 5%) thin films were deposited on the alumina substrate by using R.F. magnetron sputtering method. The substrate temperature was 300$^{\circ}C$ and 500$^{\circ}C$, respectively and then some specimens were annealed at 500$^{\circ}C$ for 4h in air. ITO gas-sensing films formed crystallines before and after annealing. As results of gas sensitivity measurements to an ozone gas, the sensor deposited at 300$^{\circ}C$ and then annealed has the highest sensitivity (sensible below 1 ppm). As the operating temperature increased gradually, the sensitivity decreased but the response time and stability improved.

• Journal of Korean Society of Water and Wastewater
• /
• v.24 no.1
• /
• pp.85-92
• /
• 2010

In this study, odorous compounds emitted from various wastewater treatment were treated with using the non-thermal plasma reaction, and the effluent gas from the plasma reactor was introduced to a waste sludge reactor to achieve simultaneous sludge reduction. Hydrogen sulfide, the model odorous compound, was removed at 70% using the plasma reaction, and greater than 99% removal efficiency was observed when treated by the sludge reactor. In addition, the sludge reactor showed a high efficiency of ozone removal. As ozone reacted with sludge, oxidation with organic matters took place, and total COD decreased by 50~60% and soluble COD increased gradually. As a result, the integrated process consisting of the non-thermal plasma and the sludge reactor can be successfully applied for the simultaneous treatment of malodorous gas and waste sludge.

• Journal of Environmental Health Sciences
• /
• v.44 no.6
• /
• pp.539-547
• /
• 2018

Objectives: Ozone ($O_3$) advisories are issued by provincial/prefectural and city governments in Korea and Japan when oxidant concentrations exceed the criteria of the related country. Advisories issued only after exposure to high $O_3$ concentrations cannot be considered ideal measures. Forecasts of $O_3$ would be more beneficial to citizens' health and daily life than real-time advisories. The present study was undertaken to present a simplified forecasting model that can predict surface $O_3$ concentrations for the afternoon of the day of the forecast. Methods: For the construction of a simple and practical model, a multivariate regression model was applied. The monitored data on gases and climate variables from Japan's air quality networks that were recorded over nearly one year starting from April 2016 were applied as the subject for our model. Results: A well-known inverse correlation between $NO_2$ and $O_3$ was confirmed by the monitored data for Iksan, Korea and Fukuoka, Japan. Typical time fluctuations for $O_3$ and $NO_x$ were also found. Our model suggests that insolation is the most influential factor in determining the concentration of $O_3$. $CH_4$ also plays a major role in our model. It was possible to visually check for the fit of a theoretical distribution to the observed data by examining the probability-probability (P-P) scatter plot. The goodness of fit of the model in this study was also successfully validated through a comparison (r=0.8, p<0.05) of the measured and predicted $O_3$ concentrations. Conclusions: The advantage of our model is that it is capable of immediate forecasting of surface $O_3$ for the afternoon of the day from the routinely measured values of the precursor and meteorological parameters. Although a comparison to other approaches for $O_3$ forecasting was not carried out, the model suggested in this study would be very helpful for the citizens of Korea and Japan, especially during the $O_3$ season from May to June.

• Korean Journal of Materials Research
• /
• v.29 no.5
• /
• pp.322-327
• /
• 2019

Hole carrier selective MoOx film is obtained by atomic layer deposition(ALD) using molybdenum hexacarbonyl[$Mo(CO)_6$] as precursor and ozone($O_3$) oxidant. The growth rate is about 0.036 nm/cycle at 200 g/Nm of ozone concentration and the thickness of interfacial oxide is about 2 nm. The measured band gap and work function of the MoOx film grown by ALD are 3.25 eV and 8 eV, respectively. X-ray photoelectron spectroscopy(XPS) result shows that the $Mo^{6+}$ state is dominant in the MoOx thin film. In the case of ALD-MoOx grown on Si wafer, the ozone concentration does not affect the passivation performance in the as-deposited state. But, the implied open-circuit voltage increases from $576^{\circ}C$ to $620^{\circ}C$ at 250 g/Nm after post-deposition annealing at $350^{\circ}C$ in a forming gas ambient. Instead of using a p-type amorphous silicon layer, high work function MoOx films as hole selective contact are applied for heterojunction silicon solar cells and the best efficiency yet recorded (21 %) is obtained.

• Journal of the Institute of Convergence Signal Processing
• /
• v.24 no.3
• /
• pp.153-159
• /
• 2023

As research results showed that ozonated olive oil has excellent therapeutic effects on skin diseases, attempts were made to develop cosmetics manufacturing technology using ozone. Ozone is harmful to the human body, so a separate facility must be prepared to manufacture ozonated olive oil as a cosmetic raw material. The manufacturing device developed in this study was designed as an optimized process for manufacturing cosmetics while ensuring the safety of workers involved in production. To verify the ozonated olive oil produced from the implemented device, a toxicity test was conducted on animals. After applying ozonated oil (high concentration) to the rabbit's back for 24 hours, mortality, general symptoms and symptoms were measured. A skin irritation evaluation was performed. As a result of the experiment, as a result of evaluating the test substance treatment area after a certain period of time, it was confirmed that no skin irritation was observed in all animals, confirming the safety of the ozonated oil production process and the safety of the product.

• Journal of Korean Society for Atmospheric Environment
• /
• v.28 no.3
• /
• pp.249-260
• /
• 2012

Monitoring of climate change and atmospheric environment by satellite measurements has been increased in recent years. In this study, nitrogen dioxide ($NO_2$) measurements from Ozone Monitoring Instrument (OMI) were compared with surface measurements over the Korean peninsula. $NO_2$ from OMI measurements showed high values and also showed seasonal variations such as high concentration in winter and low in summer over metropolitan areas while $NO_2$ concentration at national background station was low and did not clearly show seasonal variations. Surface measurements showed similar temporal and spatial variations to those of satellite measurement. The comparison between satellite measurements and surface measurements showed that the correlation between them was higher in urban area (r=0.64 at Seoul and r=0.63 at Daegu) than in national background stations (r=0.37 at Jeju) because the concentration in urban area was relatively high so that the variation of $NO_2$ concentration could be detected better than at national background stations by satellite. Satellite can effectively measure the emission and transport of pollutants with no limitations in spatial coverage.

• Journal of Korean Society for Atmospheric Environment
• /
• v.23 no.1
• /
• pp.14-28
• /
• 2007

This study presented the selection of ozone ($O_3$) potential factors and designed and assessed its potential prediction model using multiple-linear regression equations in Ulsan area during the springtime from April to June, $2000{\sim}2004$. $O_3$ potential factors were selected by analyzing the relationship between meterological parameters and surface $O_3$ concentrations. In addition, cluster analysis (e.g., average linkage and K-means clustering techniques) was performed to identify three major synoptic patterns (e.g., $P1{\sim}P3$) for an $O_3$ potential prediction model. P1 is characterized by a presence of a low-pressure system over northeastern Korea, the Ulsan was influenced by the northwesterly synoptic flow leading to a retarded sea breeze development. P2 is characterized by a weakening high-pressure system over Korea, and P3 is clearly associated with a migratory anticyclone. The stepwise linear regression was performed to develop models for prediction of the highest 1-h $O_3$ occurring in the Ulsan. The results of the models were rather satisfactory, and the high $O_3$ simulation accuracy for $P1{\sim}P3$ synoptic patterns was found to be 79, 85, and 95%, respectively ($2000{\sim}2004$). The $O_3$ potential prediction model for $P1{\sim}P3$ using the predicted meteorological data in 2005 showed good high $O_3$ prediction performance with 78, 75, and 70%, respectively. Therefore the regression models can be a useful tool for forecasting of local $O_3$ concentration.

• Asian Journal of Atmospheric Environment
• /
• v.7 no.3
• /
• pp.139-151
• /
• 2013

The purpose of this study is to understand distributional characteristics in the atmospheric concentrations of $O_3$ and its precursors based on data taken at the southern Korean coast. The average $O_3$ concentration in the high altitude was found to range from 32.3 to 90.8 ppb with a maximum concentration of 132 ppb. The ambient $O_3$ concentration was high at altitudes of 1000 m and 500 m above the southern sea near Gwangyang Bay and an industrial area containing emission sources. The daily mean concentrations of $NO_y$ and CO were 6.7-24.2 ppb and 0.152-0.487 ppm, respectively. During the aerial measurement period, the highest mean concentration of $O_3$ was observed on June 1. The aerial measurement results showed that the maximum ozone concentration was observed to be 132 ppb in the high altitude the southernmost part of Yeosu. The measurement of vertical wind fields in the air indicated that $O_3$ formed in the southernmost part of Yeosu was transported by strong southwesterly winds to the northeast of Gwangyang Bay. This led to a ground $O_3$ concentration of over 100 ppb in Jinju, the northeastern part of Gwangyang Bay. On August 9, when the maximum $O_3$ concentration was 50 ppb, the measurement results showed that $O_3$ concentrations were relatively low compared to other days. In particular, low $NO_2$ and TVOC concentrations were observed, both of which serve to form $O_3$ in photochemical reactions.

• Bulletin of the Korean Chemical Society
• /
• v.31 no.9
• /
• pp.2503-2508
• /
• 2010

ZnO thin films were grown on Si or $SiO_2$/Si substrates, at growth temperatures ranging from 150 to $400^{\circ}C$, by atomic layer deposition (ALD) using diethylzinc and water. Despite the large band gap of 3.3 eV, the ALD ZnO films show high n-type conductivity, i.e. low resistivity in the order of $10^{-3}\;{\Omega}cm$. In order to understand the high conductivity of ALD ZnO films, the films were characterized with X-ray diffraction, transmission electron microscopy, X-ray photoelectron spectroscopy, elastic recoil detection, Rutherford backscattering, Photoluminescence, and Raman spectroscopy. In addition, the various analytical data of the ZnO films were compared with those of ZnO single crystal. According to our analytical data, metallic zinc plays an important role for the high conductivity in ALD ZnO films. Therefore when the metallic zinc was additionally oxidized with ozone by a modified ALD sequence, the resistivity of ZnO films could be adjusted in a range of $3.8{\times}10^{-3}\;{\sim}\;19.0\;{\Omega}cm$ depending on the exposure time of ozone.