• Journal of the Korean Society for Precision Engineering
• /
• v.22 no.9 s.174
• /
• pp.188-193
• /
• 2005

To provide the various machining materials with excellent quality and dimensional accuracy, high -speed machining is very useful tool as one of the most effective rapid manufacturing processes. However, high-speed machining is not suitable for microscale thin-walled structures because of the lack of the structure stiffness to resist the cutting force. A new method which is able to make a very thin-walled structure rapidly will be proposed in this paper. This method is composed two processes, high-speed machining and filling process. Strong workholding force comes out of the solidification of filling materials. Low-melting point metal alloys are used in order to minimize the thermal effect during phase change and to hold arbitrary shape thin-walled structures quickly during high-speed machining. To verify the usefulness of this method, we will show some applications, for examples thin -wall cylinders and hemispherical shells, and compare the experimental results to analyze the dimensional accuracy of typical parts of the structures.

• Transactions of Materials Processing
• /
• v.13 no.1
• /
• pp.78-83
• /
• 2004

High-temperature superconduction materials(Bi2223) possess electrical/electronic and magnetic properties. Because high-temperature superconduction materials is a ceramic powder, that cannot be produced singlehandedly. So Ag sheathed Bi-2223 wire was produced by drawing process using powder-in-tube(PIT) method. This superconductor has many difficulties to produce. The main difficulty is that the mechanical properties of the ceramic powder are very different from those of the Ag sheath. And by these properties, Bi2223 high-temperature superconductor, which has a single filament drawing process and multi-filament drawing process, has a defect like sausaging and bursting at a center. This study analyzed multi-filament drawing process by FEM, and a defect generated during multi-filament drawing was studied by FEH. Specially, in order to prevent a bursting at a center, this study presented a method that inserts a pure Ag at a center of multi-filament wire

• Journal of the Semiconductor & Display Technology
• /
• v.13 no.1
• /
• pp.73-81
• /
• 2014

In this paper, high-speed Hybrid MAC (Medium Access Control layer) implementation suitable for smart grid applications is researched. MB-OFDM (Multi-Band Orthogonal Frequency Division Multiplexing) is considered for high-speed communication method in smart grid application. In this paper, the MAC adopts the distributed network managing method. Also, the MB-OFDM merit of high-speed transfer rate of up to 480Mbps must be supported. Hence, this paper presents an efficient hardware-software integration (co-design) method in order to realize a high- speed transmission, and a realizing method of distribution network. Finally, MAC performance and reliability based on MB-OFDM PHY (PHYsical layer) are confirmed through simulation and emulation.

• Journal of Korea Multimedia Society
• /
• v.24 no.9
• /
• pp.1242-1250
• /
• 2021

Detection of outliers deviating normal data distribution in high dimensional data is an important technique in many application areas. In this paper, a distance-based outlier detection method using landmarks in high dimensional data is proposed. Given normal training data, the k-means clustering method is applied for the training data in order to extract the centers of the clusters as landmarks which represent normal data distribution. For a test data sample, the distance to the nearest landmark gives the outlier score. In the experiments using high dimensional data such as images and documents, it was shown that the proposed method based on the landmarks of one-tenth of training data can give the comparable outlier detection performance while reducing the time complexity greatly in the testing stage.

• Journal of Korean Society for Atmospheric Environment
• /
• v.27 no.6
• /
• pp.751-771
• /
• 2011

Biogenic Volatile Organic Compound (BVOC) emissions are estimated with BEIS3.12 (Biogenic Emissions Inventory System version 3.12) over the Seoul Metropolitan Area (SMA) and then used in CMAQ (Community Multiscale Air Quality) simulations for two high ozone episodes in 2004 and 2007 June. The first- and second-order sensitivity coefficients of ozone to BVOC emissions are estimated with High-order Decoupled Direct Method (HDDM) simulation in order to estimate the influence of BVOC emissions on ozone using the Zero-Out Contribution (ZOC) approach. ZOC analysis shows that relative contribution of BVOC emissions on daily maximum 1-hr ozone is as high as 30% for high ozone days above 100 ppb. However simulated isoprene concentrations were over-estimated by a factor of 2 when compared to the observations at the PAMS (Photochemical Air Monitoring Station) for the 2007 episode. When assumed that actual BVOC emissions are 50% less than estimated, the ZOC of BVOC emissions on daily maximum ozone drops by more than 10 ppb for the episode. The result indicates that uncertainty in BVOC emissions may have significant impact on high ozone prediction in the SMA.

• Proceedings of the KSR Conference
• /
• 2011.10a
• /
• pp.3201-3207
• /
• 2011

This paper reviewed wave propagation of train vibration based on the study of high speed railway soft ground section with pile slab construction. In a filed of railway, concrete track has been adapted in a railway construction. And in order to maintain its track, soil improving method was required to control residual settlement. Within many soft ground settlement prevention techniques, pile slab method has an effect of minimizing residual settlement of soft ground. This is possible using support embankment load method by construct pile slab or cap the upper soft ground. This paper reviewed vibration wave characteristic of soft ground section with pile slab using numerical analysis application through finite element analysis. Pile slab method is established between high stiffened soft ground and embankment this creates a possibility of vibration block or slab amplification. Thus analyzed of wave propagation was done with roadbed and structure property to confirm application performance of pile slab method of high speed railway structure.

• The Transactions of the Korean Institute of Electrical Engineers C
• /
• v.54 no.6
• /
• pp.269-273
• /
• 2005

In order to achieve high efficiency and low cost, new high-speed addressing method is suggested. This can be implemented by reducing the address discharge time lag through the priming effect. This paper suggests a new ADR(Address During Reset) driving method which provides priming particles by a separated driving method without adding auxiliary electrode or auxiliary discharge. The experimental results show an approximately 100ns reduction in the formative delay time of address discharge and a reduction in jitter of over 200ns. Also, due to enough time being available for reset, there was a reduction of about 29$\%$ in linht emitted during the reset period considerably.

• Women's Health Nursing
• /
• v.19 no.1
• /
• pp.36-47
• /
• 2013

Purpose: This study was to explore subjectivity on childbearing in high school students. Methods: A Q-methodology which provides a method of analyzing the subjectivity of each type was used. Forty-three high school students classified 40 selected Q-statements into 9 points standard. The obtained data were analyzed by using the pc-QUANL program. Results: High school students' subjectivity on childbearing were analyzed into two types: Type 1 turned out to be 'FOLS (family oriented life style)' and Type 2 'CINK (couple important no kid)'. Conclusion: In order to resolve such problems as low birth rate and the advanced age of the population, effective youth and adult programs, policy and institution are required. The current demographic, economic and other factors such as personal values and policies may lower birth rate. In particular, youths' need for children and birth rate tend to be lower. There are positive and negative patterns in high school students' subjectivity on childbearing. Thus, national and social efforts are needed to change negative factors into positive ones. In order to maintain positive subjectivity on childbearing in high school students, it is necessary to apply family-centered educational programs and to implement birth-friendly and realistic programs for promoting child birth.

• Journal of the Korean institute of surface engineering
• /
• v.37 no.5
• /
• pp.296-300
• /
• 2004

The defects of partial denture frameworks are mainly shrinkage porosity, inclusions, micro-crack, particles from investment, and dendritic structure. In order to investigate a good casting condition of partial denture frameworks, the three casting alloys and casting methods were used and detected casting defects were analyzed by using electrochemical methods. Three casting alloys (63Co-27Cr-5.5Mo, 63Ni-16Cr, 63Co-30Cr-5Mo) were prepared for fabricating partial denture frameworks with various casting methods; centrifugal casting (Kerr, USA), high frequency induction casting (Jelenko Eagle, USA), vacuum pressure casting (Bego, Germany). The casting temperature was $1,380^{\circ}C$ (63Co-27Cr-5.5Mo and 63Ni-16Cr) and $1,420^{\circ}C$ (63Co-30Cr-5Mo). The casting morphologies were analyzed using FE-SEM and EDX. The corrosion test of the dendritic structure was performed through potentiodynamic method in 0.9% NaCl solutions at $36.5^{\circ}C$ and corrosion surface was observed using SEM. The defects of partial denture frameworks improved in the order of centrifugal casting, high frequency induction casting, and vacuum pressure casting method, especially, pore defects were found at part of clasp in the case of centrifugal casting method. The structure of casting showed dendritic structure for three casting alloys. In the 63Co-27Cr-5.5Mo and 63Co-30Cr-5Mo, $\alpha$-Co and $\varepsilon$-Co phases were identified at matrix and $${\gamma}$-Ni_2$Cr second phase were shown in 63Ni-16Cr. Also, the corrosion resistance of cast structure increased in the order of vacuum pressure casting, high frequency induction casting, and centrifugal casting method.

• Wind and Structures
• /
• v.34 no.1
• /
• pp.59-72
• /
• 2022

In this work the numerical results of the flow around a 5:1 rectangular cylinder at Reynolds numbers 3 000 and 40 000, zero angle of attack and smooth incoming flow condition are presented. Implicit Large Eddy Simulations (ILES) have been performed with a high-order accurate spatial scheme and an implicit high-order accurate time integration method. The spatial approximation is based on a discontinuous Galerkin (dG) method, while the time integration exploits a linearly-implicit Rosenbrock-type Runge-Kutta scheme. The aim of this work is to show the feasibility of high-fidelity flow simulations with a moderate number of DOFs and large time step sizes. Moreover, the effect of different parameters, i.e., dimension of the computational domain, mesh type, grid resolution, boundary conditions, time step size and polynomial approximation, on the results accuracy is investigated. Our best dG result at Re=3 000 perfectly agrees with a reference DNS obtained using Nek5000 and about 40 times more degrees of freedom. The Re=40 000 computations, which are strongly under-resolved, show a reasonable correspondence with the experimental data of Mannini et al. (2017) and the LES of Zhang and Xu (2020).