• Nuclear Engineering and Technology
• /
• 제40권5호
• /
• pp.429-438
• /
• 2008

The objective of the present study is the depth and layout optimizations of a single layer, high level radioactive waste repository in a discontinuous rock mass with special joint set arrangements. A single layer repository model, considering variations in the repository depths, pitches, and tunnel spacings, is used to analyze the thermomechanical interaction behavior. It is assumed that the repository is constructed in saturated granite with joints; the PWR spent fuel in a disposal canister is installed in a deposition drift which is then sealed with compacted bentonite; and the backfill material is filled in the repository tunnel. The decay heat generated by the high level radioactive wastes governs the thermomechanical behavior of the near field rock mass of the repository. The temperature and displacement behavior of the repository is influenced more by the pitch variations than the tunnel spacing and repository depth. However, the stress behavior is influenced more by the repository depth variations than the pitch and tunnel spacing. For the final selection of the tunnel spacing, pitch, and repository depth, other aspects such as the nuclide migration through a groundwater flow path, construction costs, operation costs, and so on should be considered.

• 방사성폐기물학회지
• /
• 제20권4호
• /
• pp.469-488
• /
• 2022

Technology for high-level-waste disposal employing a multibarrier concept using engineered and natural barrier in stable bedrock at 300-1,000 m depth is being commercialized as a safe, long-term isolation method for high-level waste, including spent nuclear fuel. Managing heat generated from waste is important for improving disposal efficiency; thus, research on efficient heat management is required. In this study, thermal management methods to maximize disposal efficiency in terms of the disposal area required were developed. They efficiently use the land in an environment, such as Korea, where the land area is small and the amount of waste is large. The thermal effects of engineered barriers and natural barriers in a high-level waste disposal repository were analyzed. The research status of thermal management for the main bedrocks of the repository, such as crystalline, clay, salt, and other rocks, were reviewed. Based on a characteristics analysis of various heat management approaches, the spent nuclear fuel cooling time, buffer bentonite thermal conductivity, and disposal container size were chosen as efficient heat management methods applicable in Korea. For each method, thermal analyses of the disposal repository were performed. Based on the results, the disposal efficiency was evaluated preliminarily. Necessary future research is suggested.

• Nuclear Engineering and Technology
• /
• 제44권1호
• /
• pp.89-102
• /
• 2012

The buffer and backfill are important components of the engineered barrier system in a high-level waste repository, which should be constructed in a hard rock formation at a depth of several hundred meters below the ground surface. The primary function of the buffer and backfill is to seal the underground excavation as a preferred flow path for radionuclide migration from the deposited high-level waste. This study investigates the hydraulic conductivity and swelling pressure of Kyungju Ca-bentonite, which is the candidate material for the buffer and backfill in the Korean reference high-level waste disposal system. The factors that influence the hydraulic conductivity and swelling pressure of the buffer and backfill are analyzed. The factors considered are the dry density, the temperature, the sand content, the salinity and the organic carbon content. The possibility of deterioration in the sealing performance of the buffer and backfill is also assessed.

• Journal of Radiation Protection and Research
• /
• 제16권1호
• /
• pp.53-72
• /
• 1991

An integrated model is developed in this paper for the performance assessment of high level radioactive waste repository. This integrated model consists of two simple mathematical models. One is a multiple-barrier failure model of the repository system based on constant failure rates which provides source terms to biosphere. The other is a biosphere model which has multiple pathways for radionuclides to reach to human. For the parametric uncertainty and sensitivity analysis for the risk assessment of high level radioactive waste repository, Latin hypercube sampling and rank correlation techniques are applied to this model. The former is cost-effective for large computer programs because it gives smaller error in estimating output distribution even with smaller number of runs compared to crude Monte Carlo technique. The latter is good for generating dependence structure among samples of input parameters. It is also used to find out the most sensitive, or important, parameter groups among given input parameters. The methodology of the mathematical modelling with statistical analysis will provide useful insights to the decision-making of radioactive waste repository selection and future researches related to uncertain and sensitive input parameters.

• Geomechanics and Engineering
• /
• 제38권5호
• /
• pp.529-539
• /
• 2024

A high-level nuclear waste (HLW) repository is designed for the long-term disposal of high-level waste. Positioned at depths of 500-1000 meters, it offers an alternative to the insufficient storage space for spent fuels, providing a long-term solution. High-level waste emits heat and radiation, causing structural deterioration, including strength reduction and cracks. Therefore, the use of piezoelectric sensors for structural health monitoring is essential for evaluating the safety of the structure over time. Unlike other structures, the HLW repository restricts human access after the disposal of HLW, rendering sensor replacement impossible. Therefore, it is necessary to assess both the lifespan and suitability of sensors under the disposal conditions in the HLW repository. This study employed an accelerated life test (ALT) to assess the sensor's lifespan under disposal conditions. Failure modes, failure mechanisms, and operational limits were analyzed through accelerated stress test (AST). Additionally, the parameters of the Weibull life probability distribution and the Arrhenius accelerated life model were estimated through statistical methods, including the likelihood ratio test, maximum likelihood estimation, and hypothesis testing. Results confirmed that the sensor's lifespan decreases significantly with the increase in the temperature limit of the HLW repository. The findings of this study can be used for improving sensor lifespan through shielding, development of alternative sensors, or lifespan evaluation of alternative monitoring sensors.

• 터널과지하공간
• /
• 제14권6호
• /
• pp.429-439
• /
• 2004

국내 원전에서 발생되는 36,000톤의 사용후핵연료를 처분하기 위해서는 약 $4km^2$의 지하 처분장이 필요하다. 본 연구에서는 굴착량과 처분장 면적을 최소화하기 위한 지하 심부 처분장 배치의 최적화를 실시하였다. 열 해석 결과를 토대로 처분 터널과 처분공 간격이 처분장 배치에 미치는 영향을 고려한 결과, 처분장 면적과 굴착량은 처분 터널의 길이가 길어짐에 따라 감소하였다. 주어진 열적 기준을 만족하면서 처분장 면적을 줄이기 위해서는 처분 터널의 간격을 줄이고 처분공 간격을 늘리는 것이 유리하였으며, 반면에 굴착량을 최소화하는 경우 처분공 간격을 줄이고 처분 터널 간격을 늘려주는 것이 효과적인 것으로 나타났다.

• Nuclear Engineering and Technology
• /
• 제55권11호
• /
• pp.4083-4095
• /
• 2023

Currently, various research institutes in Korea are conducting research to develop a safety case for deep geological repository for high-level radioactive waste (HLW). In the past, low and intermediate-level waste (LILW) was approved by a regulatory body by performing a post-closure safety assessment, but HLW has different disposal characteristics and safety objectives are different. Therefore, in the case of HLW, safety assessment should be performed based on these changed conditions, and specific procedures are also under development. In this paper, the regulatory status of prior research institutes, feature, event and process (FEP) and scenario development cases were investigated for well-organized FEP and scenario development methodologies. In addition, through the results of these surveys, the requirements and procedures necessary for the FEP and scenario development stage during the safety assessment of repository for HLW were presented. These review results are expected to be used to identify the overall status of previous studies in conducting post-closure risk assessment for HLW repository, starting with identifying regulatory requirements, the most basic element.

• 한국시스템다이내믹스연구
• /
• 제10권2호
• /
• pp.29-52
• /
• 2009

This paper reveals the conceptual relation between High Level Radioactive Waste Repository Site(HLRWR) and Policy Acceptance of Local Residents thorough the Causal Loop Diagram. The Resident's policy acceptance depends on the perceived risk of that facility. To reduce the risks, government has to prepare the schemes of the total supporting program including cash and the local development programs.

• Nuclear Engineering and Technology
• /
• 제31권6호
• /
• pp.39-50
• /
• 1999

The physicochemical, mineralogical, hydraulic, swelling and mechanical properties of a domestic bentonite for use as the buffer material in a high-level waste repository have been measured. The bentonite is identified to be a Ca-bentonite, and the hydraulic conductivity of the compacted bentonite with the dry density higher than 1.4 Mg/㎥ is lower than 10$^{-11}$ m/s When the dry densities are 1.4 to 1.8 Mg/㎥, the swelling pressures are in the range of 6.6 to 143.5 kg/$\textrm{cm}^2$. The unconfined compressive strength is about 94 kg/$\textrm{cm}^2$, and the coefficient of volume change and the coefficient of consolidation are in the range of 0.O0249 to 0.02142 $m^2$/MN and 0.018 to 0.115$m^2$/year, respectively.

• Nuclear Engineering and Technology
• /
• 제39권6호
• /
• pp.683-690
• /
• 2007

Because of increasing concerns regarding global warming and the longevity of oil and gas reserves, the importance of nuclear energy as a major source of sustainable energy is gaining recognition worldwide. To make nuclear energy truly sustainable, it is necessary to ensure not only the sustainability of the fuel supply but also the sustained availability of waste repositories, especially those for high-level radioactive waste (HLW). From this perspective, the effort to maximize the waste loading density in a given repository is important for easing repository capacity problems. In most cases, the loading of a repository is controlled by the decay heat of the emplaced waste. In this paper, a comparison of the decay heat characteristics of HLW is made among the various fuel cycle options. It is suggested that, for a future fast breeder reactor (FBR) cycle, the removal and burning of minor actinides (MA) would significantly reduce the heat load in waste and would allow for a reduction of repository size by half.