• 방사선산업학회지
• /
• 제17권4호
• /
• pp.501-508
• /
• 2023

There are various factors that have a negative impact on safety over a long period of time after the closure of a radioactive waste disposal facility. In particular, it is important to limit substances that accelerate radionuclide migration while inhibiting adsorption between radionuclides and the subsurface medium. Through this study, a method for deriving a quantitative criteria evaluation method is proposed for cellulose among materials that accelerate the movement of these radionuclides after closure of the disposal facility. Since Sweden's SKB is representative worldwide for preparing criteria for cellulose in disposal facilities, it analyzed Sweden's acceptance criteria method and presented a method that can be applied domestically. The decomposition characteristics of cellulose and the adsorption and dissolution characteristics of ISA among degradation products were reviewed, and quantitative analysis of cement materials that create a high pH environment favorable for cellulose decomposition was also included. In addition, the total amount of the finally disposable cellulose material can be derived by using the volume information of the waste containing the cellulose material. Through this methodology for calculating the total amount of cellulose, it is expected that subsequent studies will be conducted to secure data reflecting the environmental conditions of radioactive waste disposal facilities in Korea. In addition, it is expected to be utilized as a good method to evaluate the impact of other complexing agents other than cellulose and to suggest the amount of disposal.

• 터널과지하공간
• /
• 제1권
• /
• pp.32-38
• /
• 1991

9 nuclear power plants are presently in operation in Korea. They produce radioactive waste of which the most long-lived radioactive elements need to be safely stored for hundreds of thousands of years, isolated from humanity and the environment. The safe disposal of high level radioactive waste in mined cavities requires knowledge of the mechanical. thermal and fluid flow characteristics of rock as perturbed by a thermal pulse The literature review was performed to assemble data on the following properties: modulus tensile strength compressive strength thermal expansion specific heat, thermal conductivity thermal diffusivity and permeability.

• 한국세라믹학회지
• /
• 제52권2호
• /
• pp.92-102
• /
• 2015

Current plans for legacy nuclear wastes stored in underground tanks at the U.S. Department of Energy's Hanford Site in Washington are that they will be separated into high-level waste and low-activity waste fractions that will be vitrified separately. Formulating optimized glass compositions that maximize the waste loading in glass is critical for successful and economical treatment and immobilization of these nuclear wastes. Glass property-composition models have been developed and applied to formulate glass compositions for various objectives for the past several decades. Property models with associated uncertainties combined with composition and property constraints have been used to develop preliminary glass formulation algorithms designed for vitrification process control and waste-form qualification at the planned waste vitrification plant. This paper provides an overview of the current status of glass property-composition models, constraints applicable to Hanford waste vitrification, and glass formulation approaches that have been developed for vitrification of hazardous and highly radioactive wastes stored at the Hanford Site.

• Nuclear Engineering and Technology
• /
• 제38권6호
• /
• pp.483-488
• /
• 2006

Highly radioactive waste is placed in metal canisters embedded in dense clay termed buffer. The radioactive decay is associated with heat production, which causes degradation of the buffer and thereby time-dependent loss of its waste-isolating potential. The buffer is prepared by compacting air-dry smectite clay powder and is initially not fully water saturated. The evolution of the buffer starts with slow wetting by uptake of water from the surrounding rock followed by a long period of exposure to heat, pressure from the rock and chemical reactants. It can be described by conceptual and theoretical models describing processes related to temperature (T), hydraulic (H), mechanical (M) and chemical performance (C). For temperatures below 90 C more than 75 % of the smectite will be preserved for 100 000 years but cementation may reduce the excellent performance of the buffer to a yet not known extention.

• 대한환경공학회지
• /
• 제37권5호
• /
• pp.312-323
• /
• 2015

본 논문은 국내 외 사용후핵연료 및 방사성폐기물 관리 현안 분석을 바탕으로 향후 나아갈 방향을 제시한다. 원자력 발전을 앞서 이용해 온 미국 사례를 중심으로 다양한 국가들의 처분장 확보 및 실패 사례와 최근의 관리 정책 기조를 정리하였다. 아울러, 원전 해체에 따른 고선량 방사성폐기물, 핵안보 사안 그리고 핵연료 전주기 관점에서 평가한 경제성 기반 정책 수립의 필요성을 논하였다. 사용후핵연료 및 방사성폐기물 관리의 핵심 사안을 세부적으로 중간저장, 영구처분 그리고 재처리로 분류하고 기술 검토와 인허가 체제 구축 및 연구 추진 방향성에 대한 정책 제언을 담았다.

• 방사성폐기물학회지
• /
• 제21권1호
• /
• pp.23-41
• /
• 2023

Coupled thermo-hydraulic-mechanical (THM) processes are essential for the long-term performance of deep geological disposal of high-level radioactive waste. In this study, a numerical sensitivity analysis was performed to analyze the effect of rock properties on THM responses after the execution of the heater test at the Kamaishi mine in Japan. The TOUGH-FLAC simulator was applied for the numerical simulation assuming a continuum model for coupled THM analysis. The rock properties included in the sensitivity study were the Young's modulus, permeability, thermal conductivity, and thermal expansion coefficients of crystalline rock, rock salt, and clay. The responses, i.e., temperature, water content, displacement, and stress, were measured at monitoring points in the buffer and near-field rock mass during the simulations. The thermal conductivity had an overarching impact on THM responses. The influence of Young's modulus was evident in the mechanical behavior, whereas that of permeability was noticed through the change in the temperature and water content. The difference in the THM responses of the three rock type models implies the importance of the appropriate characterization of rock mass properties with regard to the performance assessment of the deep geological disposal of high-level radioactive waste.

• 한국지반공학회논문집
• /
• 제33권7호
• /
• pp.55-64
• /
• 2017

심층 처분방식은 고준위폐기물을 처분하기 위한 가장 적합한 대안으로 고려되어지고 있다. 심층 처분시설은 지하 500~1,000m 깊이의 암반층에 설치되며 심층 처분시스템의 구성 요소로는 처분용기, 완충재, 뒷채움 및 근계 암반이 있다. 이 중 완충재는 심층 처분시스템에 있어 매우 중요한 역할을 한다. 완충재는 지하수 유입으로부터 처분용기를 보호하고, 방사성 핵종 유출을 저지한다. 처분용기에서 발생하는 고온의 열량이 완충재로 전파되기에 완충재의 열적 성능은 처분시스템의 안정성 평가에 매우 중요하다고 할 수 있다. 따라서 본 연구에서는 국내 경주산 압축 벤토나이트 완충재에 대한 열전도도 추정 모델을 개발하고자 하였다. 압축 벤토나이트 완충재의 열전도도는 비정상 열선법을 이용하여 다양한 함수비와 건조밀도에 따라 측정하였으며, 총 39개의 실험 데이터를 토대로 회귀분석을 이용하여 경주 압축 벤토나이트의 열전도도 추정 모델을 제시하였다.

• 자원환경지질
• /
• 제56권6호
• /
• pp.887-897
• /
• 2023

스웨덴, 스위스, 영국 등 폐기물 처분 선도국들은 고준위방사성폐기물 심층처분시설의 계획, 부지선정, 건설, 운영, 폐쇄, 그리고 폐쇄 후 관리 전 단계에서 안전성평가를 수행하고 있다. 안전성평가는 각 단계에서 반복적으로 이루어지며, 장기간에 걸쳐 다양하고 방대한 양의 데이터를 생성하므로, 안전성평가 자료를 위한 데이터베이스를 구축하고 효과적으로 관리하기 위한 자료관리체계를 구축하는 것이 필수적이다. 본 연구에서는 폐기물 처분 분야에서 선도적인 국가의 안전성평가 자료관리체계를 1) 안전성평가 입력 및 참조자료, 2) 자료관리 지침, 3) 자료관리 조직, 그리고 4) 자료관리 전산시스템으로 구분하여 분석하였다. 각 국가는 특정 부분에서는 차이를 보였지만, 안전성평가 입력자료를 처분 시스템 구성 요소를 기반으로 분류하고, 이를 제공, 사용, 관리하는 조직을 설립하며, 지침 및 매뉴얼에 따라 품질관리 체계를 구현하는 등 공통적인 특성을 보이고 있다. 이러한 사례들은 고준위방사성폐기물 처분시설의 안전성을 확보하고 신뢰성을 향상시키기 위해 효과적으로 데이터 관리 시스템과 문서 관리 시스템을 구축하는 것이 중요하다는 것을 시사한다. 이를 위해서는 유연하게 활용 가능한 입력자료의 분류, 입력자료의 일관성과 추적성 보장, 그리고 입력자료와 문서관리를 위한 품질관리 체계를 수립하는 것이 필요하다.

• Nuclear Engineering and Technology
• /
• 제54권11호
• /
• pp.4005-4012
• /
• 2022

As high-level radioactive waste (HLW) generated from nuclear power plants is harmful to the human body, it must be safely disposed of by an engineered barrier system consisting of disposal canisters and buffer and backfill materials. A gap exists between the canister and buffer material in a HLW repository and between the buffer material and natural rock-this gap may reduce the water-blocking ability and heat transfer efficiency of the engineered barrier materials. Herein, the basic characteristics and thermal properties of granular bentonite, a candidate gap-filling material, were investigated, and their effects on the temperature change of the buffer material were analyzed numerically. Heat transfer by air conduction and convection in the gap were considered simultaneously. Moreover, by applying the Korean reference disposal system, changes in the properties of the buffer material were derived, and the basic design of the engineered barrier system was presented according to the gap filling material (GFM). The findings showed that a GFM with high initial thermal conductivity must be filled in the space between the buffer material and rock. Moreover, the target dry density of the buffer material varied according to the initial wet density, specific gravity, and water content values of the GFM.

• 한국세라믹학회지
• /
• 제43권3호
• /
• pp.148-151
• /
• 2006

In order to examine the process parameters for the vitrification of Low and Intermediate Level radioactive Waste (LILW) generated from nuclear power plants, measurements of several melt properties was performed for four selected glasses containing simulated waste. Electrical conductivity and viscosity were determined at temperatures ranging from 1123 to $1673^{\circ}C$. The temperature dependences of both properties in the molten state showed a similar behavior in which their values decrease as the temperature increases. The values of the electrical conductivity and viscosity at a temperature of 1423K adopted in an induction cold crucible melter process were $0.27{\sim}0.42$ S/cm and $9.8{\sim}42$ dPas, respectively.