• KIEAE Journal
• /
• v.3 no.2
• /
• pp.59-66
• /
• 2003

To be the design method supporting aesthetic ability of human, CAAD system should essentially recognize architectural form in the same way of human. In this study, visual perception process of human was analyzed to search proper computational method performing similar step of perception of it. Through the analysis of visual perception, vision was separated to low-level vision and high-level vision. Edge detection and neural network were selected to model after low-level vision and high-level vision. The 24 images of building, tree and landscape were processed by edge detection and trained by neural network. And 24 new images were used to test trained network. The test shows that trained network gives right perception result toward each images with low error rate. This study is on the meaning of artificial intelligence in design process rather than on the design automation strategy through artificial intelligence.

• Steel and Composite Structures
• /
• v.18 no.1
• /
• pp.121-134
• /
• 2015

This paper is to investigate the potentials of the elastic seismic design of twisted high-rise steel diagrid frame buildings in the strong wind and moderate/low seismicity regions. First, the prototypes of high-rise steel diagrid frames with architectural plans that have a twist angle of 0 (regular-shaped), 1, and 2 degrees were designed to resist wind. Then, the effects of the twist angle on the estimated quantities and structural redundancies of the diagrid frames were examined. Second, the seismic performance of the wind-designed prototype buildings under a low seismicity was evaluated. The response spectrum analysis was conducted for the service level earthquake (SLE) having 43-year return period and the maximum considered earthquake (MCE) having 2475-year return period. The evaluation resulted that the twisted high-rise steel diagrid frames resisted the service level earthquake elastically and most of their diagrid members remained elastic even under the maximum considered earthquake.

• Korean Journal of Computational Design and Engineering
• /
• v.11 no.4
• /
• pp.315-325
• /
• 2006

It is very often necessary to search for similar parts during designing a new product because its parts are often easily designed by modifying existing similar parts. In this way, the design time and cost can be reduced. Thus it would be nice to have an efficient similarity comparison algorithm that can be used anytime in the design process. There have been many approaches to compare shape similarity between two solids. In this paper, two parts represented in B-Rep is compared in two steps: one for overall appearances and the other for detail features. In the first step, geometric information is used in low level of detail for easy and fast pre-classification by the overall appearance. In the second step, feature information is used to compare the detail shape in high level of detail to find more similar design. To realize the idea above, a multi resolution algorithm is proposed so that a given solid is described by an overall appearance in a low resolution and by detail features in high resolution. Using this multi-resolution representation, parts can be compared based on the overall appearance first so that the number of parts to be compared in high resolution is reduced, and then detail features are investigated to retrieve the most similar part. In this way, computational time can be reduced by the fast classification in the first step while reliability can be preserved by detail comparison in the second step.

• Journal of the Korea Society of Computer and Information
• /
• v.27 no.6
• /
• pp.139-147
• /
• 2022

This study tried to analyze the relationship among physical activity level, subjective health status, COVID-19 Fear. This study used the 2020 Community Health Survey that includes 229,269 survey data from adults over 19 years old. The complex sampling design was applied including weight, stratification, cluster variables. Through the SPSS statistics program with complex sampling frequency analysis, complex sampling Chi-square and complex sampling regression, this study found followings. First, the group with high level of physical activity showed higher level of subjective health status than the group with low level of physical activity. Second, the group with high level of physical activity showed lower level of COVID-19 fear than the group with low level of physical activity. Third, the group with high level of subjective health status showed lower level of COVID-19 fear than the group with low level of subjective health status. However, this study has the limitation that this study did not check whether participant is diagnosed with Covid-19 or not.

• Journal of the Earthquake Engineering Society of Korea
• /
• v.20 no.3
• /
• pp.181-190
• /
• 2016

The objective of this study is to apply performance-based seismic design to high-rise apartment buildings in Korean considering collapse prevention level. The possible issues during its application were studied and the suggestions were made based on the findings from the performance-based seismic design of a building with typical residential multi-unit layout. The lateral-force-resisting system of the building is ordinary shear walls system with a code exception of height limit. In order to allow the exception, the serviceability and the stability of the ordinary shear wall structure need to be evaluated to confirm that it has the equivalent performance as the one designed under the Korean Building Code 2009. The structure was evaluated whether it satisfied its performance objectives to withstand Service Level and Maximum Considered Earthquake.

• JSTS:Journal of Semiconductor Technology and Science
• /
• v.16 no.3
• /
• pp.300-311
• /
• 2016

The analog-to-digital-converter-based (ADC-based) backplane receivers that consist of a front-end ADC followed by a digital equalizer are gaining more popularity in recent years, as they support more sophisticated equalization required for high data rates, scale better with fabrication technology, and are more immune to PVT variations. Unfortunately, designing an ADC-based receiver that meets tight power and performance budgets of high-speed backplane link systems is non-trivial as both front-end ADC and digital equalizer can be power consuming and complex when running at high speed. This paper reviews the state of art designs for the front-end ADC and digital equalizers to suggest implementation choices that can achieve high speed while maintaining low power consumption and complexity. Design-space exploration using system-level models of the ADC-based receiver allows through analysis on the impact of design parameters, providing useful information in optimizing the power and performance of the receiver at the early stage of design. The system-level simulation results with newer device parameters reveal that, although the power consumption of the ADC-based receiver may not comparable to the receivers with analog equalizers yet, they will become more attractive as the fabrication technology continues to scale as power consumption of digital equalizer scales well with process.

• Journal of information and communication convergence engineering
• /
• v.12 no.3
• /
• pp.186-192
• /
• 2014

Monolithic three-dimensional integrated chips (3D ICs) are an emerging technology that offers an integration density that is some orders of magnitude higher than the conventional through-silicon-via (TSV)-based 3D ICs. This is due to a sequential integration process that enables extremely small monolithic inter-tier vias (MIVs). For a monolithic 3D memory, we first explore the static random-access memory (SRAM) design. Next, for digital logic, we explore several design styles. The first is transistor-level, which is a design style unique to monolithic 3D ICs that are enabled by the ultra-high-density of MIVs. We also explore gate-level and block-level design styles, which are available for TSV-based 3D ICs. For each of these design styles, we present techniques to obtain the graphic database system (GDS) layouts, and perform a signoff-quality performance and power analysis. We also discuss various challenges facing monolithic 3D ICs, such as achieving 50% footprint reduction over two-dimensional (2D) ICs, routing congestion, power delivery network design, and thermal issues. Finally, we present design techniques to overcome these challenges.

• Journal of the Korea Fashion and Costume Design Association
• /
• v.16 no.3
• /
• pp.191-200
• /
• 2014

Employees overseas have a need to prepare according to the different environments and industrial structures between countries. Therefore, to investigate qualities for fashion designers to possess when they work abroad, especially in the United States, this study compared the level of knowledge required to fulfill the work of fashion design in both South Korea and the United States. Responses from workers who are engaged to fashion design from the representative online career information systems of two countries, 'Worknet' in South Korea and '$O^*Net$' in the United States, were used as data. Looking at the result derived from the analysis of this study, first by comparing various statistical indicators, results showed the difference between knowledge level required to fashion designer in South Korea and in the United States. Even with the same type of job, because environments and industrial structures of each country are dissimilar, a different level of knowledge will be required in order to perform their tasks. Second, fashion designers in both South Korea and the United States required a high level of knowledge in the 'fine arts', 'administration and management', 'production and processing', and 'design' to perform their duties as a fashion designer. As a result, both countries have similarities that fashion designers need to possess a high level of the knowledge in areas such as 'production of products' as well as 'sales of products'. Furthermore, human relationship field of knowledge such as 'counseling', 'psychology', and 'communication' appeared to be more necessary to fashion designers in South Korea than those in the United States. On the other hand, higher degree of knowledge of 'machines and tools', ' fine arts', and 'transportation' appeared to be more necessary to fashion designers in the United States than those in South Korea.

• Journal of the Institute of Convergence Signal Processing
• /
• v.8 no.4
• /
• pp.285-292
• /
• 2007

SoC which deploys software modules as well as hardware IPs on a single chip is a major revolution taking place in the implementation of a system design, and high-level synthesis is an important process of SoC design methodology. Recently, SPARK parallelizing high-level synthesis software tool has been developed. It takes a behavioral ANSI-C code as an input, schedules it using code motion and various code transformations, and then finally generates synthesizable RTL VHDL code. Although SPARK employs various loop transformation algorithms, the synthesis results generated by SPARK are not acceptable for basic signal and image processing algorithms with nested loop. In this paper we propose a SoC platform with an application-specific PLD targeting local operations which are feature of many loop algorithms used in signal and image processing, and demonstrate design process which maps behavioral specification with nested loops written in a high-level language (ANSI-C) onto 2D systolic array. Finally the derived systolic array is implemented on the proposed application-specific PLD of SoC platform.

• Proceedings of the Computational Structural Engineering Institute Conference
• /
• 2005.04a
• /
• pp.375-382
• /
• 2005

In this paper, a practical control method of wind-induced vibration of high-rise buildings is presented in the form of resizing algorithm. In the structural design process for high-rise buildings, the lateral load resisting system for the building is more often determined by serviceability design criteria including wind-induced vibration level. Even though many drift method have been developed in various forms, no practical design method for wind induced vibration has been developed so far. Structural engineers rely upon heuristic or experience in designing wind induced vibration. The performance of the proposed method is evaluated by comparing wind-induced vibration levels estimated both from approximate techniques and wind tunnel test.