• 한국지반공학회논문집
• /
• 제20권9호
• /
• pp.33-45
• /
• 2004

모래를 사용해서 매립하는 경우 일반적으로 한 가지 이상의 포설방법으로 매립이 수행된다. 따라서 모래매립지반은 그 특성이 층별로 다양하게 형성되며, 이러한 지반특성을 파악하기 위해서 일반적으로 콘관입시험이 널리 이용되고 있다. 콘저항값은 임의의 깊이에서 현장의 응력수준, 즉 상재하중의 크기에 따라 영향을 많이 받기 때문에 콘저항값을 현장의 응력수준으로 정규화할 필요가 있다. 그러므로 현장응력수준으로 정규화된 콘저항값을 이용하여 신뢰할 수 있는 지반정수와의 상관관계식을 도출하는 것이 바람직하다. 본 연구에서는 응력에 대해 최적으로 정규화된 콘저항값을 이용하여 더욱 합리적인 지반정수를 도출하고자, 싱가폴 창이 동부 매립현장에 위치한 l0m 높이의 여성토를 약 2 m씩 단계적으로 제거하며, 각 단계마다 콘관입시험을 실시하였다. 여기서 측정된 콘저항값을 다양한 방법으로 응력정규화하여 그 값들을 비교함으로써 최적의 정규화 방법을 제안하였다.

• 터널과지하공간
• /
• 제17권1호
• /
• pp.26-31
• /
• 2007

우리나라에는 현재 고리, 월성, 영광 등 11기의 원자력 발전소가 운영되면서 전체 전력생산량의 40% 이상을 담당하고 있으며, 2006년까지는 12기가 추가 건설되어 총 23기의 원자력 발전소가 운영되어 국내 총 전력생산량의 절반 이상을 담당하게 될 예정이다. 하지만 이러한 원자력 발전은 필연적으로 인체에 유해한 각종 방사성 폐기물을 생산하게 되므로 이에 대한 처분기술은 대단히 높은 안전율을 고려하여 확보되어야 한다. 한국 원자력연구소의 기초연구에 의하면 국내 실정상 지하 암반내 심층처분이 가장 유리한 시스템인 것으로 보고되고 있으며, 그 중에서도 심도 500 m 이상의 고심도 지하 암반내에 터널을 뚫고 터널 바닥면에 처분공을 일렬로 굴착하여 이 처분공 내에 canister로 밀봉된 방사성폐기물을 유기하는 KBS-3 처분 시스템을 제안하고 있다. 본 연구에서는 KBS-3 처분 시스템을 고려할 경우, 필연적으로 야기되는 고심도 지하에서의 초기응력성분이 처분 시스템에 미치는 영향을 분석하기 위해 수치해석을 실시하였으며 이와 함께 제반 설계정수 중에서 초기응력값이 어떠한 비중을 차지하는지를 살펴보았다.

• 한국진공학회지
• /
• 제13권4호
• /
• pp.157-163
• /
• 2004

라디오파 플라즈마 화학증착법 (radio frequency plasma assisted chemical vapor deposition: r.f.-PACVD) 법으로 증착된 다이아몬드성 카본 (Diamond-like Carbon : DLC) 필름에서 나타나는 습도에 따른 압축 잔류 응력의 변화 거동을 체계적으로 조사하였다. 합성에 사용된 탄화수소 가스의 종류와 -100V에서 -800V 범위의 기판 바이어스 전압의 조절을 통해 폴리머성 필름에서 흑연성 필름까지 광범위한 구조의 DLC 필름을 합성하였다. 상대습도가 10％-90％ 범위에서 변화하는 분위기 챔버 내에서 박막의 잔류응력의 변화를 실시간으로 측정하였다 박막의 경도와 잔류응력이 최고 값을 가지는 합성조건에서 얻어진 치밀한 DLC박막에서는 습도에 따른 잔류응력의 변화가 관찰되지 않았다. 그러나, 폴리머상이나 흑연상의 박막에서는 두 경우 모두 습도가 높아짐에 따라 압축 잔류응력이 증가함을 관찰할 수 있었으며, 습도의 변화에 대해 잔류응력이 즉각적으로 변화하였다. 한편, 동일한 습도에서 압축 잔류응력의 증가량은 필름의 두께에 반비례하는 것이 관찰되었다. 이 결과는 물분자가 필름의 구조내로 침투하면서 생기는 변화가 아니라, 박막의 표면에서 일어나는 물분자와의 반응에 의해 필름의 잔류응력이 변할 수 있음을 의미한다.

• 한국콘크리트학회:학술대회논문집
• /
• 한국콘크리트학회 1991년도 가을 학술발표회 논문집
• /
• pp.140-145
• /
• 1991

Tests were conducted to get a mix proportioning of high strength concrete between σ28 and (C/W) using low quality materials easily purchased in situ. Superplasticizer was used as a chemical admixture to compensate low slump of base concrete keeping it up about 15±2㎝. General material properties such as modulus of elasticity, poisson's ratio, unit weight and stress-strain characteristic of high strength concrete were obtained. Test results show that mix proportioning of high strength concrete proposed in this paper have reasonable validity and these can be used as a design criteria in high strength concrete construction.

• 한국표면공학회지
• /
• 제47권6호
• /
• pp.303-310
• /
• 2014

In this study, the average in-situ stress in metallic thin film was measured during deposition of the Cu thin films on the Si(111) wafer and then the phenomenon of stress shift by the interruption of deposition was measured using Cu thin films. We have observed the stress shift in accordance with changing amount of atom's movement between the surface and grain boundary through altering the grain size of the Cu thin film with variety of parameters. The grain size is known to be affected on the deposition rate, film thickness and deposition temperature. As a experimental results, the these parameters was not adequate to explain stress shift because these parameters affect directly on the amount of atom's movement between the surface and grain boundary as well as the grain size. Thus, we have observed the stress shift toward tensile side in accordance with the grain size changing through the interlayer deposition. From an experiment with inserting interlayer before deposit Cu, in thin film which has big grain size with high roughness, amount of stress movement is higher along direction of tensile stress after deposition that means, after deposition process, driving force of atoms moving in grain boundary and on the surface of the film is relatively higher than before.

• KSBB Journal
• /
• 제31권4호
• /
• pp.284-290
• /
• 2016

In this research, recombinant human cytotoxic T-lymphocyte antigen 4-immunoglobulin (hCTLA4Ig) was produced by transgenic rice cells. RAmy3D promoter was used for overcome the limitation of low expression level in transgenic plant cells, and the secretion of target protein was accomplished by signal peptide. However, the RAmy3D promoter system which can be induced only by sugar starvation causes the decrease of cell viability. As a result, cell death promotes the release of protease which degrades the target proteins. The protein stability and productivity can be significantly influenced by proteolysis activity. Therefore, development of new strategies are necessary for the in situ recovery of target proteins from cell culture media. In this study, in situ recovery was performed by various strategies. Direct addition of Protein A resin with nylon bag leads to cell death by increased shear stress and decrease in production of hCTLA4Ig by protease. Medium exchange through modified flask could recover hCTLA4Ig with high cell viability and low protease activity, on the other hand, the productivity was lower than that of control. When in situ recovery was conducted at day 7 after induction in air-lift bioreactor, 1.94-fold of hCTLA4Ig could be recovered compared to control culture without in situ recovery. Consequently, in situ recovery of hCTLA4Ig from transgenic rice cell culture could enhance productivity significantly and prevent degradation of target proteins effectively.

• 대한원격탐사학회:학술대회논문집
• /
• 대한원격탐사학회 2006년도 Proceedings of ISRS 2006 PORSEC Volume I
• /
• pp.394-397
• /
• 2006

Gridded products of surface wind/wind-stress over the world ocean have been constructed by using satellite scatterometer as the Japanese Ocean Flux data sets with Use of Remote-sensing Observation (J-OFURO) data. Our previous validation study in the tropical Pacific using TAO/Triton and NDBC buoys revealed high reliability of our products. In this study, the Kuroshio Extension Observatory (KEO) buoy data are used for validation of other gridded wind-stress products including the NCEP-1 and 2 in the western North Pacific region where there have been few in-situ data. Results reveal that our J-OFURO product has almost zero mean difference and smallest root-mean-square (RMS) difference, while the NCEP-1 and 2 ones significantly positive biases and relatively high RMS difference. Intercomparison between the J-OFURO and NCEP products in a wide region of the North Pacific covered by the westerly winds exhibits that the NCEPs have larger magnitudes in the wind stress than the J-OFURO's, suggesting overestimation of the NCEPs.

• 한국마이크로전자및패키징학회:학술대회논문집
• /
• 한국마이크로전자및패키징학회 2002년도 춘계 기술심포지움 논문집
• /
• pp.247-251
• /
• 2002

In this paper the maximum current carrying capability of ACAs flip chip joint is investigated based on two failure mechanisms: (1) degradation of the interface between gold stud bumps and aluminum pads; and (2) ACA swelling between chips and substrates under high current stress. For the determination of the maximum allowable current, bias stressing was applied to ACAs flip chip joint. The current level at which current carrying capability is saturated is defined as the maximum allowable current. The degradation mechanism under high current stress was studied by in-situ monitoring of gold stud bump-aluminum pad ACA contact resistance and also ACA junction temperature at various current level. The cumulative failure distributions were used to predict the lifetime of ACAs flip chip joint under high current stressing. These experimental results can be used to better understand and to improve the current carrying capability of ACA flip chip joint.

• Corrosion Science and Technology
• /
• 제16권4호
• /
• pp.194-200
• /
• 2017

Stress-corrosion cracking (SCC) of alloy 600 and alloy 800 in 0.5 mol/L thiosulfate solution during constant strain was investigated using electrochemical noise (EN) combined with 3-D microscope techniques. The in-situ morphology observation and EN results indicate that the SCC process could be divided into three stages: (1) passive film stabilization and growth, (2) crack initiation, (3) and crack growth. Power Spectral Density (PSD) and the probability distribution obtained from EN were used as the "fingerprint" to distinguish the different processes. During passive film stabilization and growth, the current noise signals resembled "white noise": when the crack initiated, many transient peaks could be seen in the current noise and the wavelet energy at low frequency as well as the noise resistance decreased. After crack propagation, the noise amplitudes increased, particularly the white noises at low and high frequencies ($W_L$ and $W_H$) in the PSDs. Finally, the detection of metal structure corrosion in a simulated sea splash zone and pipeline corrosion in the atmosphere are established.

• Elastomers and Composites
• /
• 제53권2호
• /
• pp.57-66
• /
• 2018

Styrene-butadiene rubber (SBR), reinforced with different contents of silica (with or without modification using silane coupling agents), was prepared by a modified sol-gel method involving hydrolyzation of tetraethoxysilane over an acid catalyst. The structures of the as-prepared samples were characterized using various techniques, such as scanning electron microscopy, X-ray photoelectron spectroscopy, Fourier-transform infrared spectroscopy, and thermogravimetric analysis. The mechanical properties of the as-prepared samples were discussed in detail. The results revealed an increasing of the storage modulus (G') with increase in the silica content without modification. In contrast, G' decreased after modification using silane coupling agents, indicating a reduction in the silica-silica interaction and improved dispersion of silica in the SBR matrix. Both tensile stress and hardness increased with increase in the silica content (with modification) in the SBR matrix, albeit with low values compared to the samples with un-modified silica, except for the case of silica modified using (3-glycidyloxypropyl) trimethoxysilane (GPTS). The latter observation can be attributed to the special structure of GPTS and the effort of oxygen atom lone-pair.