• Membrane Journal
• /
• v.20 no.4
• /
• pp.278-289
• /
• 2010

A series of composite membranes based on sulfonated poly(arylene ether sulfone) (SPAES) were prepared via addition of tetraethyl orthosilicate (TEOS) and solution casting method. The morphological structure, water uptake, proton conductivity of the resulting composite membranes were extensively investigated as function of the content of TEOS. By the sol-gel reaction, TEOS molecules were not completely converted to $SiO_2$ particles, but formed only oligomer-type. Also, EDS confirms that the resulting silicon dioxide was homogeneously distributed in the composite membranes. As the content of TEOS increased, the prepared membranes increased water uptake and proton conductivity at high temperature and low relative humidity condition. In particular, considerably high proton conductivity (0.015 S/cm) at $120^{\circ}C$ and 48%RH was demonstrated in the composite membrane containing 200% TEOS, which is 10 times greater than that of unmodified SPAES membrane. Also, the composite membranes were found to have enhanced thermal stability compared to the unmodified membrane.

• Journal of Environmental Science International
• /
• v.13 no.12
• /
• pp.1049-1058
• /
• 2004

PM10 concentration of total 48 samples collected from 4 sites (the root of Miryang University, Sangnam township Office in Miryang. the root of Changwon elementary school, and Junam reservoir in Changwon) turned out to range from 42.29 to 69.49{\mu}g/m^{3}$, and the average concentration was the root of Changwon elementary school $(69.49{\mu}g/m^{3})$>the root of Miryang university $(58.59{\mu}g/m^{3})$>Junam reservoir $(43.56{\mu}g/m^{3})$>Sangnam township Office $(42.29{\mu}g/m^{3}).> In particular, Junam reservoir, the Clean Area, had a slightly higher value than Sangnam township Office. It was thought although the site was plane and windy without pollutants around. it had a higher concentration value influenced by external factors including bigger population and a northeasterly wind due to a newly-established industrial complex nearby. As for water-soluble ions among PM10 particle collected in Miryang and Changwon area, SO42- accounted for $50{/%}$ and NO3-, was $35{\%}$, and the concentration order was S042->N03->Cl->F-. As for the average concentration of metallic components among PM10 particle collected in Miryang and Changwon area. the root of Changwon elementary school had the AI concentration, Fe concentration and Zn concentration 4 times, 3 times and 1.5 times that of Junam reservoir, respectively. The root of Miryang University had the AI concentration 2 times that of Sangnam township Office, and had Fe concentration and Zn concentration $1.2\~1.5$ times those of Sangnam township Office. When it comes to the relation between metallic elements and meteorological factors in Changwon area, the highest coefficient of correlation was between temperature and humidity with 0.92, and temperature and wind speed turned out in the reverse correlation. The coefficient of correlation between Al and Cr was as high as 0.78. Among metallic elements, the coefficient of correlation between Cu and Pb, Cd, Al were 0.84, 0.85, 0.79, respectively. It is thought that the high coefficient of correlation between Cu and Pb is ascribed to busy traffic and wind in the urban areas, Sammun-dong and Gagok-dong in Miryang. Meanwhile, the coefficients of correlation between Fe and Cu, Al, Zn, Cd, Pb were in the reverse correlation. These coefficients of correlation are attributed to the difference in pollutant sources, rather than difference in pollutant and non-pollutant.

• Journal of Environmental Science International
• /
• v.23 no.10
• /
• pp.1719-1729
• /
• 2014

This study is carried out in order to bridge the gap to understand the relationships between South Asian and East Asian monsoon systems by comparing the summer (June-September) precipitation of Nepal and South Korea. Summer monsoon precipitation data from Nepal and South Korea during 30 years (1981-2010) are used in this research to investigate the association. NCEP/NCAR reanalysis data are also used to see the nature of large scale phenomena. Statistical applications are used to analyze these data. The analyzed results show that summer monsoon precipitation is higher over Nepal ($1513.98{\pm}159.29mm\;y^{-1}$) than that of South Korea ($907.80{\pm}204.71mm\;y^{-1}$) and the wettest period in both the countries is July. However, the coefficient of variation shows that amplitude of interannual variation of summer monsoon over South Korea (22.55%) is larger in comparison to that of Nepal (10.52%). Summer monsoon precipitation of Nepal is found to be significantly correlated to that of South Korea with a correlation coefficient of 0.52 (99% confidence level). Large-scale circulations are studied to further investigate the relationship between the two countries. wind and specific humidity at 850 hPa show a strong westerly from Arabian Sea to BOB and from BOB, wind moves towards Nepal in a northwestward direction during the positive rainfall years. In case of East Asia, strong northward displacement of wind can be observed from Pacific to South Korea and strong anticyclone over the northwestern Pacific Ocean. However, during the negative rainfall years, in the South Asian region we can find weak westerly from the Arabian Sea to BOB, wind is blowing in a southerly direction from Nepal and Bangladesh to BOB.

• Korean Journal of Plant Taxonomy
• /
• v.38 no.4
• /
• pp.583-599
• /
• 2008

Dokdo, small island located in the eastern end of the Korean Peninsula, has been an uninhabited island for long time due to long distance from the land. Moreover, the steep slope of volcanic tuff at Dokdo is well drained for high permeability and Dokdo has few plain areas, swamps and very thin soil layers. In this study, pollen analysis at Dokdo was attempted on the profile of organic sandy soil for the first time in Korea owing to the marine climate environment with high humidity and precipitation including snowfalls in spite of unprofitable condition geologically or geomorphologically. While many historical, political researches have been accumulated for territorial problem of Dokdo with Japan, natural scientific researches with field work are not sufficient, and few paleoecological researches have been done. As a result of pollen analysis, the ratio of the NAP(Non-Arboreal Pollen) and spore was higher than AP(Arboreal Pollen), and the vegetation change existed by showing dramatic decrease of AP at the upper layer. AP was composed of almost Pinus, and a little Alnus, Quercus, Betula, Carpinus, Picea and Ulmus. NAP was composed of Gramineae, Compositae, Chenopodiaceae Cyperaceae, Caryophyllaceae, Liliaceae, Umbelliferae, Artemisia, Lobelia, Rumex, Polygonum. Increase of the NAP such as Gramineae, Artemisia and Chenopodiaceae, they would mostly have been transported from the other areas because agricultural activity is impossible at Dokdo. While one reason of Pinus thunbergii decrease could be regarded as environmental change, the other reason would be lumbering of pine trees by human activity which is adapted to Dokdo environment.

• Journal of Adhesion and Interface
• /
• v.12 no.4
• /
• pp.111-116
• /
• 2011

The characteristics of natural resin, sap of the lacquer tree were examined as an adhesive for the ceramic conservation since it has such outstanding properties like corrosion resistance against acid and alkali, heat-resistance, waterproof, antiseptic and protection against insects. In order to utilize raw lacquer as an adhesive not under the hardening conditions of lacquer like high humidity (RH 75 to 85%) and high temperature (120 to $170^{\circ}C$), but under normal condition, isinglass and animal glue were added to raw lacquer at certain ratio. In addition, the viscosity and the drying time were measured and their possibilities of application were also investigated through measurement of tensile and adhesive strength. As a result of experiment, it was possible to dry at room temperature and RH $50{\pm}5%$ to mix with raw lacquer and glue, and the drying time of sample with animal glue was faster than that of isinglass. Furthermore, the adhesion of sample with glue was increased more than raw lacquer. It seems to be possible to use the environmental friendly traditional adhesive for the ceramic conservation and restoration, if there are studies or examinations of safety of applications on objects and weathering resistance.

• The Korean Journal of Mycology
• /
• v.34 no.2
• /
• pp.112-118
• /
• 2006

To select efficient entomopathogenic fungal strains of Lecanicillium for the biocontrol of aphid, Myzus persicae, conidial suspension ($1{\times}10\;conidia/ml$) was sprayed onto a detached Chinese cabbage leaf in a petri dish with a dampened filter paper that had 20 nymphs of aphid. Lecancillium strain 4078 and 6543 were the best strains for the biocontrol of aphid at high temperature of $30^{\circ}C$ and low relative humidity (RH) of 85%, respectively. The cumulative mortality of strain 4078 at $30^{\circ}C$ after 3 days was 100% and that of strain 6543 was 90% at 85% RH after 5 days. Strain 4078 also exhibited almost 100% germination ratio of conidia and high rate of mycelial growth at the broad temperature-range of $15{\sim}25^{\circ}C$. The strain 4078 and 6543 were all identified as Lecanicillium species based on the DNA sequences (accession no.: EF026004 and EF026005, respectively) of the ITS regions of the fungi. Excellent production of aerial conidia of strain 6543 was accomplished by using steamed polished rice as the solid culture medium.

• Journal of Navigation and Port Research
• /
• v.37 no.2
• /
• pp.165-171
• /
• 2013

YoungDo bridge is the first suspension bridge in Busan which experienced several times repair and reinforcement after completion in 1934. The bridge is under demolition for extension and restoration work since 2011. The purpose of this research is to establish data base about modern concrete. The mix design of the concrete is like that cement : fine aggregate : coarse aggregate = 1 : 2 : 4 or 1 : 3 : 6 by the parts. The compressive strength is in the ranges from 50 to 55 MPa and the elastic modulus is in the ranges from 25 to 35 GPa. From the fact that the deviation is less than 10 %, considerably high quality control was conducted in those days. The carbonation depth is 5.92 cm at the bridge post and 14.3 cm at the machine room. That is why ocean environment keeps the high humidity. The diffusion coefficient of chloride ion through the pores in concrete is 1.052e-12 $m^2/s$ from the regression analysis using the experiment data. The water cement ration is estimated at approximately 35 % in case if the concrete using ordinary Portland cement.

• Resources Recycling
• /
• v.18 no.1
• /
• pp.38-43
• /
• 2009

In this study, binderless consolidation processes of ultra foe Si powder, by-products of making high purity poly-Si in the current method, were systematically investigated for use as economical solar-grade feedstock. The average diameter of the silicon powder was $7.8{\mu}m$. The main contaminants of the fine silicon powder were $SiO_2$ type oxide and humidity. The chemical pretreatment using the HF solution was observed to be effective for the improvement of the compactability of the silicon powder and the density ratio and the strength of the silicon powder compacts. The yield of the binder-free consolidation process increased by 20% under a vacuum condition. In as-received state, the silicon powder were not pure enough to be used as solar grade feed-stock material. After the dry chemical treatments, a sufficiently high purity above solar-grade was able to be achieved.

• Horticultural Science & Technology
• /
• v.31 no.5
• /
• pp.538-543
• /
• 2013

During summer in Korea, the excessively high temperature causes growth retardation and quality reduction in cut roses grown in greenhouse. Mist treatments were conducted to reduce the temperature and avoid quality reduction of cut roses. The temperature change in the greenhouse, growth and quality of cut roses, and injuries caused by insects or fungi were investigated during mist treatment. Daily maximum temperature reduced as the number of mist treatment increased, resulting in $6^{\circ}C$ reduction by mist treatment for 10 seconds at 5 min interval. This temperature reduction occurred only when maximum temperature was over $40^{\circ}C$ in greenhouse, and not when it was less than $40^{\circ}C$ or rainy and/or cloudy day. Plant height and fresh weight of the cut roses were increased at the range of 10-20% by mist treatment. As frequency of mist treatment increased, however, malformed flowers increased and vase life of cut rose was largely shortened. The injuries by insects like as beet armyworm larvae and scale insect increased as well. In conclusion, it is recommended that mist treatment must be used when the daily maximum temperature in a green house is over $40^{\circ}C$ and forecasting for disease or insects should be conducted as well.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.17 no.9
• /
• pp.206-211
• /
• 2016

Various applications require dry air at low temperature, such automation equipment, semiconductor manufacturing, chemical production lines, and coating processes for the shipbuilding industry. Four evaporators for low temperature (below $0^{\circ}C$) were installed for a dehumidification system. Moist air is cooled sequentially over three evaporators. The first evaporator has an evaporation temperature of $13^{\circ}C$, that of the second evaporator is $5^{\circ}C$, and that of the third evaporator is maintained at $-1.3^{\circ}C$. In the fourth evaporator implantation thereby the moisture contained in the moisture air. A pressure regulator (CPCE 12) is used at this point and is defrosted when the vapor pressure is below a set value. The non-implantation moisture of the air is a heating system that uses the waste heat of a condenser with high temperature. It develops the cooling type's dehumidifier, which is important equipment that prevents the destruction of protein and measures the temperature and humidity at each interval by changing the front air velocity from 1.0 m/s to 4.0 m/s. The cooling capacity was also calculated. The greatest cooling capacity was 1.77 kcal/h for a front air velocity of 2.0 m/s