• Journal of the Korean Electrochemical Society
• /
• v.10 no.3
• /
• pp.196-202
• /
• 2007

The performance characteristics of the polymer electrolyte fuel cells (PEFCS) were investigated under various humidification conditions at steady-state and transient conditions. The PEFC studied in this study was characterized by I-V curves in the potentiostatic mode and EIS (electrochemical impedance spectroscopy). The I-V curves representing steady-state performance were obtained from OCV to 0.25 V, and the dynamic performance responses were obtained at some voltages. The effects of anodic external humidification were measured by varying relative humidity of hydrogen from 20% to 100% while dry air was supplied in the cathode. At the high voltage region, the performance became higher with the increase of the temperature, while at the low voltage region, the performance decreased with the increase of temperature. The EIS showed that ohmic losses were larger at the dry condition of membrane and the effects of mass transport losses increased remarkably when the external and self-humidification were high. The dynamic responses were also monitored by changing the voltage of the PEFC instantly. As the temperature increased, the current reached steady-state earlier. The self-humidification with the generated water delayed the stabilization of the current except for low voltage conditions.

• Korean Journal Plant Pathology
• /
• v.3 no.4
• /
• pp.277-284
• /
• 1987

Infection rate of the blister rust was investigated with special reference to the effect of eight stand factors at 221 plots selected from 131 Korean pine(Pinus koraiensis S. et Z,) stands, and the data were analyzed by multivariated statistical analysis. Environmental factors such as the density of Pedicularis spp., alternate hosts of the Korean pine blister rust, altitude, stand age, aspect, and pruning treatment, from the highest to the lowest were found to be related to the occurrence of the rust disease, Density of Pedicularis spp, was the most closely related to the' infection rate than any other factors, Especially, Pedicularis spp. growing naturally inside the pine stand had an important effect on the infection rate, but those on the outside more than 100m away had little effects, The higher the elevation, the heavier the infection rate. Infection was the heaviest at the altitudes of above 1,000m with high relative humidity and cool temperature. Infection rate was severe in young stands below 10 years old and had a reducing tendency as they mature. Stands above 16 years old were more resistant. The infection rate by the aspect of stand was higher at E- NE and W -SW exposures than at S-SE and N -NW. The infection rate at non-pruning stands was higher than at pruning stands with the lowest branch being at least 60cm high from the ground.

• Journal of Animal Environmental Science
• /
• v.14 no.1
• /
• pp.61-68
• /
• 2008

The roof structural model of liquid manure storage tank was designed to improve a structural safety and an ability of resistance to corrosion by the bad environmental condition with high humidity and high gas concentration. Due to corrosion of a general steel, the 5 years used materials were reduced to one-third of a new material in the result of a bending strength test. Some structural materials were tested to evaluate a strength and an anti-corrosion, and stainless steel pipe (STS439), steel angle with zinc hot dipping, rectangular steel pipe covered with FRP (Fiberglass Reinforced Plastics) resin were selected finally. A stainless steel is more expansive about $3{\sim}5$ times than general structural steel. But its durability under heavy corrosive environment is expected twice as long as general steel. The roof models were designed as closed cone type for each of the three structural materials. In the result of a FEM (Finite Element Method) structural analysis for the developed models, the safe snow depth was higher 2.3 times than a general roof structure, when elements of equal section modulus were used.

• Journal of Korean Society of Occupational and Environmental Hygiene
• /
• v.26 no.3
• /
• pp.324-333
• /
• 2016

Objectives: We aimed to compare the sampling performance of different flow-based impactor samplers for collecting fungal spores and bacteria and to explore the association of the level of bioaerosols with activity patterns of occupants in daycare center settings. Methods: For comparison of sampling performance, two different flow-based samplers (greater than 100 L/min or not) were selected; a low flow-based sampler (one-stage Andersen sampler) and two high flow-based samplers (DUO SAS SUPER 360 sampler, BUCK bio-culture sampler). We collected airborne mold and bacteria in 30 daycare centers with various levels of contaminated air. Three repeat samplings per each sampler were performed. Mold and bacteria were grown for 96 hours at $25{\pm}1^{\circ}C$ and 48 hours at $35{\pm}1^{\circ}C$, respectively. The Andersen and SAS samplers were used for investigating the association between the level of bioaerosols and the activity patterns of occupants in daycares. Particular matters 10($PM_{10}$), temperature, and relative humidity were monitored as well. Samplings were carried out with one-hour interval from 9 to 5 O'clock. For statistical comparisons, Kruskal-Wallis test, Wilcoxon's signed rank test, and multiple regression analysis were carried out. Results: The airborne level of molds by the low flow-based sampler were significantly higher than that of high flow-based samplers (indoor, P=0.037; outdoor, P=0.041). However, no statistical difference was observed in the airborne level of bacteria by each sampler. Also the level of bioaerosols varied by the time, particularly with different activity patterns in daycare centers. The higher level of mold and bacteria were observed in play time in indoor. Similarly, the concentrations of $PM_{10}$ were significantly associated with the level of bioaerosols (P<0.05). Conclusions: Our findings indicate that the flow rate of sampler, rather than total air volume, could be able to affect the results of sampling. Also, the level of airborne mold and bacteria vary behavior patterns of occupants in indoor of daycare settings. Therefore, different samplers with other flow rate may be selected for mold or bacteria sampling, and activity patterns should be considered for bioaerosol sampling as well.

• Korean Journal of Organic Agriculture
• /
• v.20 no.4
• /
• pp.655-668
• /
• 2012

Foliar diseases are major constraints to profitable organic tomato production. Especially, powdery mildew, leaf mold and gray mold of tomato occur severely on organic cultured tomatoes in Korea. This study was conducted to develop organic tomato cultivation technology using environmental-friendly disease control methods (resistance cultivar planting, air circulation fan installation, oil-egg yolk mixtures, and microbial agents). When tomatoes were cultivated in plastic film house installed with air circulation fan, daily range of temperature was decreased by $2{\sim}7^{\circ}C$, average relative humidity was decreased by 1~5% compared to those in plastic house without air circulation fan. Consequently, incidence of tomato leaf mold and tomato gray mold was reduced by 55.0% and 24.4%, respectively. Control effect of microbial agents and oil-egg yolk mixtures against major tomato diseases was examined in plastic house. As a result, the control value of microbial agents against tomato gray mold and tomato leaf mold showed at the range of 49.0~55.9 %(gray mold) and 39.2~58.2%(leaf mold), respectively. The control value of oilegg yolk mixtures against tomato powdery mildew showed 97.6%. Fifteen tomato cultivars were evaluated for disease resistance against leaf mold and powdery mildew in organically cultivated tomato field. Among 15 tomato cultivars, seven cultivars including 'Super-top' were found to be high resistant to tomato leaf mold. Also 'Powerking', one of fifteen tomato cultivars, showed to be high resistant to tomato powdery mildew.

• Korean Journal of Organic Agriculture
• /
• v.23 no.1
• /
• pp.91-101
• /
• 2015

'Chuhwangbae' pears (Pyrus pyrifolia Nakai) were investigated on how types of paper bag and harvesting dates influenced on skin blackening before harvest as well as fruit quality after harvest. Experiments included four different types of paper bags (NP/YP, GP/YP, NP/BP, and NP/RP) and five different harvesting dates [160, 170, 180, 190, and 200 days after full bloom (DAFB)]. NP/YP and GP/YP indicated for newspaper- and gray paper-outer bag, respectively, with yellow paper-inner bag of the both. NP/BP and NP/RP indicated for newspaper-outer bag of the both with black paper- and red paper-inner bag, respectively. The NP/YP (newspaper/yellow paper) showed high absorbance and air and water vapor permeability in the bags, while the NP/RP (newspaper/red paper) resulted in poor physical properties in the bags. Fruit enclosed with NP/YP resulted in the absence of skin blackening, but fruit with NP/RP bags had the highest skin blackening (12.7%). Occurrence of skin blackening was concentrated on the middle and calyx end-part of fruit region. NP/RP bag treatment was likely to increase fruit weight, firmness, titratable acidity, and fruit surface color. Harvest at high relative humidity in air increased skin blackening of fruit. Later fruit harvest, such as 190 and 200 DAFB, increased skin blackening, fruit weight, and sugar content while decreasing fruit firmness and titratable acidity.

• Korean Journal of Agricultural and Forest Meteorology
• /
• v.16 no.2
• /
• pp.146-154
• /
• 2014

In the result of effect on freezing damage reduction by the shade net colors and the shade rate to tea trees during wintering period, the high shade ratio decreased tea trees growth and increased freezing damage and 55% of shade ratio based on non treatment developed new leafs and green leaf productivity. By the shade net colors, colorless shade net (55% of shade type) treatment and green shade net treatment increased green leaf productivity and decreased damaged area compare to non treatment shade net and black shade net treatment. Colorless net shade treatment reduced over 50% of freezing damage and increased (10a) 68 kg for green leaf productivity compare to non treatment shade net. The colors of shade net treatments for reduction freezing damaged in order of Black < Green < Colorless but reduction of freezing damage was so high. In the relative microclimates, treatment shade nets were $0.7^{\circ}C$ lower, average relatively humidity 14.9% higher, soil temperature $0.6^{\circ}C$ lower and soil moisture 4.6% higher than non treatment shade net. And treatment shade nets decreased average wind speed 0.7 m/s and it showed us treatment net shades effected to excessive evapotranspiration and soil dry by wind and considered one of good solution for freezing damages.

• Journal of Mushroom
• /
• v.13 no.3
• /
• pp.228-232
• /
• 2015

'Nongjin-go' is a new breed strain of Lentinula edodes, saw-dust bag variety. It is a cross combination of dikaryon Lentinula edodes ASI 3305mut and monokaryon L5-16 of L. edodes ASI 3305(Sanjo701ho). We crossbred them by 2011 and verified productive capacity from 2012 to 2013 in Rural Development Administration. Optimum temperature of mycelial growth is $30^{\circ}C$ and it of fruit-body primodium formation is range from 15 to $23^{\circ}C$. Nongjigo is agricultured at mid-high temperature well. Fruiting body is platy-hemisphere, light brown and centralizing. And bast is formed around edge of pileus. Yield productions per period is regular than 'Sanjo701'. Plastic bag culture medium is 1.5 kilogram and culture periods are 90~100 days. As its browning of pileus in culture is a little slow, Light and ventilation is needed a lot in light-culturing. Humidity is controlled properly for its color in fruit-body growing. Tested culture medium is consisted of 80% Oak-Tree saw-dust and 20% rice-bran.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.16 no.4
• /
• pp.2391-2400
• /
• 2015

Weather proof steels are used for steel bridges due to its high corrosion resistance under atmospheric conditions. However, instead of forming stabilized rust layers, general rust occurs on weather proof steels under high humidity condition close to seawater or shady places. In Japan, therefore, they perform rust stabilization treatment instead of unpainted treatment due to severe atmospheric conditions. However, most of domestic weather proof steels were constructed unpainted in the form of closed box-girder, which makes the periodical repetition of dry and wet hard to occur. For the steel bridges constructed on the Han river, the evaporation of water, dew condensation due to temperature change, and stagnant water due to rain affect harmfully on the formation of passive film on weather proof steels. Thus, in this research, in order to analyze corrosion properties inside the closed box-girder for the unpainted weather proof steel bridge in the waterworks safety zone, multiple ways of analysis such as observation with eyes, cellophane-tape test, steel thickness measurement, surface corrosion potential measurement, electron microscope analysis, and X-ray diffraction analysis of the rust were performed. As a result, unstable rust layer was observed inside the closed box-girder, and severe corrosion was observed on the top and bottom of the flanges due to the effects of stagnant water caused by rain, dew condensation, and de-icing materials.

• Journal of Korean Society for Atmospheric Environment
• /
• v.22 no.5
• /
• pp.642-652
• /
• 2006

In order to understand the characteristics of surface ozone concentration and high $O_3$ concentration days, regional data from seven air quality monitoring stations which were operated by local governments were analyzed Regional characteristics of $O_3$ concentration were analyzed with the data of $O_3$ concentration and the characteristics of $O_3$ generation and weather conditions by the selection of the days in which the concentration was higher than 80 ppb. In the case of daily variation, the lowest $O_3$ concentration was shown in all regions from 7am to 8am and the highest around at 4 pm. The monthly variation of mean $O_3$ concentration and ${\Delta}O_3$ values revealed a reducing pattern in July and August following the peak in June, and again a gradual increasing trend in September and October. The result shows that the amount of ozone is dependent on photochemical reaction. The days of $O_3$ generated more than 80 ppb in the region of Gwangyang-bay were 544 days(1,760 hrs). The frequency of occurrence in the region revealed a strong pattern with the order of Samil-dong, Jinsang, and Gwangmu-dong stations in the Gwangyang region. However, Tein-dong, which is the nearest station to air pollution material generation source, showed the lowest frequency in the study area. Consequently, the meteorological parameters which can easily generate the high concentration of $O_3$ in the region of Gwangyang-bay are characterized as follows; atmospheric temperature which is higher than $19^{\circ}C$, relative humidity with the range of $60{\sim}85%$, the less average wind velocity than 5 m/s, cloud cover which is less than 5/10, and the more duration of sunshine than 8 hours.