본 연구는 30개의 고품질 벼 품종을 공시하여 영남 남부 평야지에서 이앙시기의 차이가 도정특성에 미치는 영향을 살펴보고, 우리나라에서 재배되는 고품질 벼 품종 중에서 도정특성이 우수한 유전자원을 탐색하고자 수행하였으며, 그 결과는 다음과 같다. 1. 만기(6월 20일) 이앙시 보통기 이앙에 비하여(6월 5일) 출수가 6일 늦어지면서 등숙율과 백미 완전립비율, 완전미 도정수율이 증가하여 수당립수의 감소에 따른 쌀수량의 차이가 컸음에도 불구하고 완전미 쌀수량은 유의적인 차이가 없었다. 2. 현미 선별체를 이용한 현미립의 두께에 따른 분포특성은 보통기 이앙에 비하여 만기 이앙에서 $1.6{\sim}1.9\;mm$ 두께의 현미립이 줄고, 1.9 mm 이상 두께의 현미립이 증가하여 균일도가 향상되었다. 3. 보통기와 만기 이앙간에 도정 손실율의 차이는 없었으나, 도정에 소요되는 시간이 만기 이앙에서 증가하였다. 4. 도정특성이 우수한 유망유전자원으로 남평벼, 일미벼, 추청벼, 동진벼, 호평, 말그미, 칠보, 히노히까리, 청무 등 9품종을 선정하였다. 5. 등숙율은 추청벼, 동진벼, 밀양 205호가 90% 이상으로 가장 양호 하였으며, 백미 완전립비율은 남평벼가 95%로서 가장 좋았고, 완전미 쌀수량은 남평벼와 일미벼가 500 kg/10a 이상으로 가장 높았다.
The bending performances were evaluated at the radiata pine plywood through veneer compositions encompassing veneer quality, ply-numbers and overlays of the high density- or medium density-phenol resin impregnated sheets (hereafter abbreviated as resin sheets) on the raw plywood. In addition, a prediction on the bending MOE of veneers and plywoods was carried out by the nondestructive testing with stresswave timer. The summarized results were as follows: I. Bending strength and bending MOE of resin sheets-overlaid plywoods in parallel surface grain direction through 5 and 7ply were increased by 13 to 45% and 17 to 34%, respectively. Resin sheets-overlay occurred an increasing effect of the strength efficiency i.e. strength perpendicular-to-grain direction versus that parallel-to-grain direction, showing the phenomenon that the plywood strength becomes greater at the perpendicular-to-grain direction of 7ply than at that of 5ply. Displacement at bending failure had a greater trend at 7ply than at 5ply, and was decreased by resin sheets-overlay. 2. After the nondestructive bending MOEs were measured for individual veneers, these veneers were rearranged in plywood-manufacture. In these plywoods, including resin sheets-overlay, the actual MOE was predictable with feasibility of $R^2$=0.53, and also the nondestructively-evaluated MOE was lower by 20% in raw plywood, and higher 20% in LVL than actual bending MOEs.
본 연구는 기후변화에 따른 쌀 품질 저하 요인을 기상 환경과 종실 전분 대사 기능면에서 평가하기 위해 수행하였다. 본 연구를 위해 활용한 옥외환경조절시설(SPAR)은 대형 토양상에서 온도와 $CO_2$ 동시 처리가 가능한 시설로서 최대한 포장 수준에 가까운 조건에서 미래 기후에 대한 정밀한 환경영향평가를 가능하게 해준다. 2001~2010년 전주 지역 현재 기후 기준 RCP 8.5 시나리오에 따른 2051~2060년 가상 기후조건에서 직접 재배 시험을 한 결과 미래 기후 조건에서는 벼 생육 및 노화가 급격하게 촉진되어 출수기가 현재 대비 5일 이상 빨라지는 등 생육기간이 단축될 뿐 아니라 이로 인해 고온 등숙 환경에 노출될 위험성이 크게 높아지게 됨을 알 수 있었다. 이로 인해 벼 수량 뿐 아니라 품질 또한 크게 저하되었는데 미래에는 정상립 비율은 현저히 저하된 반면 불완전립 특히 미숙립이 크게 증가하는 결과를 보였다. 이러한 결과는 고온 등숙에 의한 전분 합성 관련 유전자들의 발현감소 및 분해 관련 유전자들의 발현 증가 등 종실 체내 전분 전류 및 축적 양상이 크게 변화하여 나타난 것이다. 따라서 향후 안정적인 고품질 쌀 생산을 위해서는 고온 등숙 내성 벼 품종 개발 및 등숙기 고온 회피를 위한 재배법 개발 등의 방향으로 기후변화 적응 대책 관련 연구가 진행되어야 할 것이다.
벼 M/G RIL 162 계통에 대한 초기급속등숙율에 대한 이화학적특성 및 색차색도특성 변이에 대한 주성분분석 및 유전력분석의 결과를 요약하면 다음과 같다. 1. 초기급속등숙율이 41% 이하인 계통군은 164계통중 74계통이었으며, 41∼60%의 계통군에는 32계통이 있었다. 또한, 초기급속등숙율이 빠른 계통군에 속하는 61∼80%사이에는 24계통이 있었으며, 초기급속등숙율이 매우 빠른 계통군으로 분류되는 81% 이상인 계통은 32계통이 있었다. 2. 벼 M/G RIL 164계통에 대한 품종군별 이화학적특성을 보면, 초기급속등숙을이 40% 이하인 계통군이 단백질 함량이 9.1%로 가장 높았으며, 지방산함량은 초기급속등숙율이 61∼80%의 계통군에서 26.5KOHmg/100g으로 가장 높게 나타났다. 또한, 곡립형태에 있어서 현미길이는 41∼60%사이의 초기급속등숙율을 보인 계통군이 5.40mm로 가장 짧았으며, 81% 이상인 계통군이 1.80mm로 현미두께가 가장 두꺼웠으며, 현미의 형태를 나타내는 현미 길이/넓이 비에 있어서는 41∼60%사이의 계통군이 2.18로 나타났다. 3. 호화온도와 깊은 관련이 있는 알카리붕괴도에 있어서는 초기급속등숙율이 61∼80%사이가 3.40으로 가장 붕괴가 되지않는 계통군으로 나봤으며, 81%이상인 계통군은 4.31로서 붕괴가 가장 잘 되는 것으로 나타나 81%의 계통군이 호화온도가 낮은 것으로 나타났다. 4. 화학적특성, 색차색도특성 및 알카리붕괴도를 이용한 벼M/G RIL 164 계통에 대한 주성분분석의 결과 제 1주성분은 약 3.6개의 형질을 포함하고 있었으며, 제 2주성분은 약 2.1개의 형질을 포함하고 있는 것으로 밝혀졌다. 또한, 제 1주성분은 전체 변동에 대한 기여율은 약 36%이었으며, 제 4주성분까지의 전체 변동에 대한 누적 기여율은 86.4%로서 설명이 가능함을 알 수 있었다. 5. 벼 M/G RIL 164 계통의 품질평가치, 단백질함량, 아밀로오스함량, 지방산함량, 명도, a-value, b-value, 채도, 색상 및 알카리붕괴도 등의 형질에 대한 유전력 검정의 결과, 품질평가치의 유전력은 87.89%로 가장 높은 유전력을 나타내었으며, 단백질함량 > 알카리붕괴도 > 지방산함량 > 아밀로오스함량 > 색상 > 명도 > a-value > b-value의 순으로 나타났으며, 채도의 유전력은 30.62%로 가장 낮음을 알 수 있었다.
건답직파재배에 시비작업의 생력화 일환으로 개발되는 전층시비용 완효성 비료와 기존 속효성 비료를 건답 트랙터세조파재배와 어린모 기계이앙재배에 시용 시, 재배유형 및 시용량별 미질의 변화를 보고자, 만금벼를 이용하여 외관상 미질, 유기성분, 무기성분, 찰성 및 밥맛 검정 등으로 검토한 결과는 다음과 같다. 1. 시험전 .후 공시토양의 이화학적 특성은 속효성 비료 시용보다는 완효성 비료의 시용구에서 시험전에 비하여 인산과 규산 및 주요 양이온들의 함량이 높았다. 2. 현미의 외관상 미질중 청립비율은 속효성 비료가 완효성 비료보다 높았고 어린모 기계 이앙이 건답직파보다 높았으며, 질소 시용량이 적을수록 높았다. 또한 미숙립은 건답직파보다는 기계이앙이, 완효성 비료보다는 속효성 비료에서 그리고 시용량이 적을수록 낮은 비율을 보였다. 3. m$^2$당 수수와 입수는 건답직파가 기계이앙보다 많았고 완효성 비료가 속효성 비료보다 많았으나, 등숙률은 반대로 기계이앙이 많았고, 속효성 비료가 많았다. 수량은 관행(516kg/10a)대비 건답직파에서 l~4% 증수를 보였고, 속효성보다는 완효성 비료에서 시용량이 많을수록 증수 경향을 보였다. 4. 쌀의 탄수화물함량은 기계이앙재배가 건답직파보다 높았고 속효성 비료보다는 완효성 비료에서, 그리고 시용량이 많을수록 높은 경향이었으나, 단백질함량은 탄수화물과는 반대의 경향을 보였다 지방함량은 재배유형간에는 큰 차이가 없었으나 속효성 비료의 시용이 완효성 비료보다 높았고, 질소시용량이 적을수록 높게 함유하였으며, 회분은 기계이앙보다는 건답직파가, 완효성 비료보다는 속효성 비료가, 그리고 질소시용량이 적을수록 높은 경향이었으며 아밀로스함량은 재배유형과 비종간에는 큰 차가 없었으나, 시비량간에 있어서는 질소시용량과 비례하여 증감하는 경향을 보였다. 5. 쌀의 N, K함량은 완효성 비료가 속효성 비료보다 높고 질소시용률이 많을수록 높았으나, Mg함량은 질소시용량이 많을수록 높았으며 기계이앙에서는 속효성 비료가, 그리고 건답직파에서는 완효성 비료가 높게 함유하였고, Na함량은 완효성 비료의 시용에서 보다 높게 함유하였다. 또한 Mg/K비을은 속효성 비료가 완효성 비료보다 높았고 기계 이앙보다는 건답직파에서 높게 나타났다. 그러나 N/K비율은 완효성 비료가 높았다. 6. 쌀의 외관상 미질은 완효성 비료보다는 속효성 비료 시용에서 그리고 질소시용량이 적을수록 우수하였으나, 밥맛 검정은 재배유형간에는 기계이앙이 건답직파보다 우수하였고, 비종간에는 속효성 비료보다는 완효성 비료에서, 그리고 질소의 감비보다는 100%시용구에서 보다 우수한 경향을 보였다.
Kwak, Kang Su;Yoon, Mi Ra;Cho, Young Chan;Lee, Choon Ki;Choi, In Duck;Kim, Mi Jung;Kim, Sun Lim;Kim, Wook Han
한국작물학회:학술대회논문집
/
한국작물학회 2017년도 9th Asian Crop Science Association conference
/
pp.254-254
/
2017
This study evaluated the grain quality of local brand rice from 6 major rice exporting countries which are anticipated to export their rice to Korea. Recently, with the end of the postponement of rice import tariffs in 2014, Korea is in a very easy environment to import foreign rice. Therefore, the quality evaluation of local brand rice in those countries is needed to secure the quality competitiveness of Korean rice, also to protect the rice industry in Korea. We provided total 38 local brand rice from USA(7), China(16), Australia(4), Thailand(3), Vietnam(5) and India(3), and 2 imported brand rice through MMA from USA and China to find out the status of the grain quality for each country. For the quality evaluation, we analyzed the physicochemical properties, milling and palatability-related characteristics. The amylose content on country average ranged from 24.4(India)~16.2%(Thailand). The protein content was 6.66% by overall average, and was higher in order of India(7.86), Australia(6.80), Vietnam(6.61), Thailand(6.59), China(6.28), USA(5.82). In Toyo glossiness value, it ranged from 75.7~45.2, and the figures in USA and China were the highest level. The head rice ratio ranged from 95.2~72.4%, and the figures in Thailand, USA and China were distinctly high. When we analyze the palatability of boiled brand rice with Chucheongbyeo as check variety by expert panelists, several rice brands from USA and China showed equal or better scores in shape, smell, taste, stickiness, texture and overall score, although most rice brands showed a tendency to decrease significantly in the taste characteristics compared with Chucheongbyeo. From the above results, it can be seen that the grain quality of USA and China rice is very competitive when imported into Korea. The results will provide basic information for the quality control of foreign rice which will be imported into Korea in the near future, also for the quality information which could be applied on the development of high-quality Korean rice varieties. Continuous monitoring about the foreign brand rice is advisable to improve the quality competitiveness of Korean rice.
Poly Si TFTs (poly silicon thin film transistors) with p channel those are annealed HT (high temperature) with gate poly crystalline silicon and LT (low temperature) with metal gate electrode were fabricated on quartz substrate using the analyzed data and compared according to the activated grade silicon thin films and the size of device channel. The electrical characteristics of HT poly-Si TFTs increased those are the on current, electron mobility and decrease threshold voltage by the quality of particles of active thin films annealed at high temperature. But the on/off current ratio reduced by increase of the off current depend on the hot carrier applied to high gate voltage. Even though the size of the particles annealed at low temperature are bigger than HT poly-Si TFTs due to defect in the activated grade poly crystal silicon and the grain boundary, the characteristics of LT poly-Si TFTs were investigated deterioration phenomena those are decrease the electric off current, electron mobility and increase threshold voltage. The results of transconductance show that slope depend on the quality of particles and the amplitude depend on the size of the active silicon particles.
Kim, Y.H.;Cho, Y.K.;Cho, K.H.;Keum, D.H.;Han, C.S.;Han, J.K.
한국농업기계학회:학술대회논문집
/
한국농업기계학회 2000년도 THE THIRD INTERNATIONAL CONFERENCE ON AGRICULTURAL MACHINERY ENGINEERING. V.II
/
pp.396-404
/
2000
Post harvest processes for rice include drying, storage and processing. Drying has a great effect on the quality of the grain. The existing rice centers are with the ill equipped, especially with drying and storage facilities. The rice harvesting has bully mechanized, a large volume of rice with high moisture content are taken to the rice processing complex(RPC). Three, the need for drying and storage facilities becomes more urgent. At present the daily drying capacity of RPC can't exceed over 40~50 M/T. Therefore new technology and facilities for a high quality and main efficient drying should be introduced one such technology is the continuous flow drying system. This research, aims to test performance efficiency the mixed continuous flow grain dryer was whose daily drying capacity is 100 M/T. The results of the performance tests of the dryer are shown as follows; (1) The temperature distribution of the drying modules were measured by a temperature recorder. The fifth module showed the highest value, followed by the seventh and the third. (2) When the intake air temperature was $55^{circ}C$, the drying rates were 1.7 and 2.6%, wb/pass in the exhaust temperatures of 20 and $22^{circ}C$. And when the intake air temperature was $60^{circ}C$, the drying rates were 1.7 and 2.3%, wb/pass in the exhaust temperatures of 22 and $25^{circ}C$. (3) The average increased rate of cracked grains after the drying process was 0.7% which is below the tolerance limit (2.0%) of the continuous grain dryer.
Kim, Sun Young;Kim, Hong Geun;Lee, Kyeong Yong;Yoon, Hyung Joo;Kim, Nam Jung
International Journal of Industrial Entomology and Biomaterials
/
제32권2호
/
pp.69-79
/
2016
Distillers dried grain (DDG) and makgeolli spent grain (MSG) are agricultural byproducts to produce alcoholic beverage. However, they are known to contain enough nutrients. Mealworm is a promising insect resource for an animal feed ingredient as well as alternative human food. With low cost, DDG and MSG were investigated as a feed ingredient for rearing high quality mealworms. DDG and MSG were mixed with wheat bran and compared to control feed (only wheat bran) for its effects on larval survivorship, larval weight, duration for developmental period, pupation rate, and pupal weight. When DDG added, larval survivorship was reduced to 50~70% compared to the control group. Larvae fed on DDG were heavier from third to sixth week. Especially, larvae with 50% DDG were 28% heavier than the control group at the third week. For the larval period, the 50% DDG group was 11% less than that for the control. The pupal weight for the 30% DDG group was 7% heavier than that for the control group. Pupation rates for all the DDG groups were higher than 90%. When compared to the control, larval survivorship for the 70% MSG group was low, but the 50% and 70% MSG groups were high during the seventh and eighth weeks because of delayed development. After the eighth week, larvae with 70% MSG showed the highest larval weight increase as 9~18% compared to the control group. Except 70% MSG group, all of MSG groups showed more than 90% pupation rates. We confirmed that adding 30~50% of DDG or MSG to conventional wheat bran have a strong potential to replace the conventional wheat bran insect feed for quality insect production.
Park, Jong Ryul;Park, Heo Man;Park, Hye Rin;Yang, Gye Hoon;Lee, Jung Hyun
농업과학연구
/
제47권4호
/
pp.717-726
/
2020
The physical characteristics of the major varieties of perilla were analyzed to use as basic data for the design of a high-quality, high-efficiency perilla cleaner and stone separator. Because the size, thousand-grain weight, angle of repose, angle of friction, bulk density and terminal velocity of perilla have significant differences according to the perilla variety, the different of characteristics by variety should be considered for performance improvement of a perilla cleaner and stone separator. Therefore the cleaner and stone separator using a sieve could be improved by the application of a detachable sieve or by using equipment such as a 2 - 3 stage sieve and regulating the slope. Moreover, because differences in the terminal velocity occur due to the differences in the size and thousand-grain weight according to the perilla variety, a blower with an adjustable fan speed was considered for the design of the improved cleaner. Additionally, it was shown that the length of perilla has the greatest correlation based on a comparison of the coefficients of the other characteristics. Accordingly, the length of perilla could be used as a major factor for the fine adjustment and parts replacement of the device. These results can be used as basic data for a high-quality, high-efficiency perilla cleaner and stone separator. In the future, the development of the machine and follow-up studies based on the basic data are needed to determine the optimized operating conditions and mechanism of action.
본 웹사이트에 게시된 이메일 주소가 전자우편 수집 프로그램이나
그 밖의 기술적 장치를 이용하여 무단으로 수집되는 것을 거부하며,
이를 위반시 정보통신망법에 의해 형사 처벌됨을 유념하시기 바랍니다.
[게시일 2004년 10월 1일]
이용약관
제 1 장 총칙
제 1 조 (목적)
이 이용약관은 KoreaScience 홈페이지(이하 “당 사이트”)에서 제공하는 인터넷 서비스(이하 '서비스')의 가입조건 및 이용에 관한 제반 사항과 기타 필요한 사항을 구체적으로 규정함을 목적으로 합니다.
제 2 조 (용어의 정의)
① "이용자"라 함은 당 사이트에 접속하여 이 약관에 따라 당 사이트가 제공하는 서비스를 받는 회원 및 비회원을
말합니다.
② "회원"이라 함은 서비스를 이용하기 위하여 당 사이트에 개인정보를 제공하여 아이디(ID)와 비밀번호를 부여
받은 자를 말합니다.
③ "회원 아이디(ID)"라 함은 회원의 식별 및 서비스 이용을 위하여 자신이 선정한 문자 및 숫자의 조합을
말합니다.
④ "비밀번호(패스워드)"라 함은 회원이 자신의 비밀보호를 위하여 선정한 문자 및 숫자의 조합을 말합니다.
제 3 조 (이용약관의 효력 및 변경)
① 이 약관은 당 사이트에 게시하거나 기타의 방법으로 회원에게 공지함으로써 효력이 발생합니다.
② 당 사이트는 이 약관을 개정할 경우에 적용일자 및 개정사유를 명시하여 현행 약관과 함께 당 사이트의
초기화면에 그 적용일자 7일 이전부터 적용일자 전일까지 공지합니다. 다만, 회원에게 불리하게 약관내용을
변경하는 경우에는 최소한 30일 이상의 사전 유예기간을 두고 공지합니다. 이 경우 당 사이트는 개정 전
내용과 개정 후 내용을 명확하게 비교하여 이용자가 알기 쉽도록 표시합니다.
제 4 조(약관 외 준칙)
① 이 약관은 당 사이트가 제공하는 서비스에 관한 이용안내와 함께 적용됩니다.
② 이 약관에 명시되지 아니한 사항은 관계법령의 규정이 적용됩니다.
제 2 장 이용계약의 체결
제 5 조 (이용계약의 성립 등)
① 이용계약은 이용고객이 당 사이트가 정한 약관에 「동의합니다」를 선택하고, 당 사이트가 정한
온라인신청양식을 작성하여 서비스 이용을 신청한 후, 당 사이트가 이를 승낙함으로써 성립합니다.
② 제1항의 승낙은 당 사이트가 제공하는 과학기술정보검색, 맞춤정보, 서지정보 등 다른 서비스의 이용승낙을
포함합니다.
제 6 조 (회원가입)
서비스를 이용하고자 하는 고객은 당 사이트에서 정한 회원가입양식에 개인정보를 기재하여 가입을 하여야 합니다.
제 7 조 (개인정보의 보호 및 사용)
당 사이트는 관계법령이 정하는 바에 따라 회원 등록정보를 포함한 회원의 개인정보를 보호하기 위해 노력합니다. 회원 개인정보의 보호 및 사용에 대해서는 관련법령 및 당 사이트의 개인정보 보호정책이 적용됩니다.
제 8 조 (이용 신청의 승낙과 제한)
① 당 사이트는 제6조의 규정에 의한 이용신청고객에 대하여 서비스 이용을 승낙합니다.
② 당 사이트는 아래사항에 해당하는 경우에 대해서 승낙하지 아니 합니다.
- 이용계약 신청서의 내용을 허위로 기재한 경우
- 기타 규정한 제반사항을 위반하며 신청하는 경우
제 9 조 (회원 ID 부여 및 변경 등)
① 당 사이트는 이용고객에 대하여 약관에 정하는 바에 따라 자신이 선정한 회원 ID를 부여합니다.
② 회원 ID는 원칙적으로 변경이 불가하며 부득이한 사유로 인하여 변경 하고자 하는 경우에는 해당 ID를
해지하고 재가입해야 합니다.
③ 기타 회원 개인정보 관리 및 변경 등에 관한 사항은 서비스별 안내에 정하는 바에 의합니다.
제 3 장 계약 당사자의 의무
제 10 조 (KISTI의 의무)
① 당 사이트는 이용고객이 희망한 서비스 제공 개시일에 특별한 사정이 없는 한 서비스를 이용할 수 있도록
하여야 합니다.
② 당 사이트는 개인정보 보호를 위해 보안시스템을 구축하며 개인정보 보호정책을 공시하고 준수합니다.
③ 당 사이트는 회원으로부터 제기되는 의견이나 불만이 정당하다고 객관적으로 인정될 경우에는 적절한 절차를
거쳐 즉시 처리하여야 합니다. 다만, 즉시 처리가 곤란한 경우는 회원에게 그 사유와 처리일정을 통보하여야
합니다.
제 11 조 (회원의 의무)
① 이용자는 회원가입 신청 또는 회원정보 변경 시 실명으로 모든 사항을 사실에 근거하여 작성하여야 하며,
허위 또는 타인의 정보를 등록할 경우 일체의 권리를 주장할 수 없습니다.
② 당 사이트가 관계법령 및 개인정보 보호정책에 의거하여 그 책임을 지는 경우를 제외하고 회원에게 부여된
ID의 비밀번호 관리소홀, 부정사용에 의하여 발생하는 모든 결과에 대한 책임은 회원에게 있습니다.
③ 회원은 당 사이트 및 제 3자의 지적 재산권을 침해해서는 안 됩니다.
제 4 장 서비스의 이용
제 12 조 (서비스 이용 시간)
① 서비스 이용은 당 사이트의 업무상 또는 기술상 특별한 지장이 없는 한 연중무휴, 1일 24시간 운영을
원칙으로 합니다. 단, 당 사이트는 시스템 정기점검, 증설 및 교체를 위해 당 사이트가 정한 날이나 시간에
서비스를 일시 중단할 수 있으며, 예정되어 있는 작업으로 인한 서비스 일시중단은 당 사이트 홈페이지를
통해 사전에 공지합니다.
② 당 사이트는 서비스를 특정범위로 분할하여 각 범위별로 이용가능시간을 별도로 지정할 수 있습니다. 다만
이 경우 그 내용을 공지합니다.
제 13 조 (홈페이지 저작권)
① NDSL에서 제공하는 모든 저작물의 저작권은 원저작자에게 있으며, KISTI는 복제/배포/전송권을 확보하고
있습니다.
② NDSL에서 제공하는 콘텐츠를 상업적 및 기타 영리목적으로 복제/배포/전송할 경우 사전에 KISTI의 허락을
받아야 합니다.
③ NDSL에서 제공하는 콘텐츠를 보도, 비평, 교육, 연구 등을 위하여 정당한 범위 안에서 공정한 관행에
합치되게 인용할 수 있습니다.
④ NDSL에서 제공하는 콘텐츠를 무단 복제, 전송, 배포 기타 저작권법에 위반되는 방법으로 이용할 경우
저작권법 제136조에 따라 5년 이하의 징역 또는 5천만 원 이하의 벌금에 처해질 수 있습니다.
제 14 조 (유료서비스)
① 당 사이트 및 협력기관이 정한 유료서비스(원문복사 등)는 별도로 정해진 바에 따르며, 변경사항은 시행 전에
당 사이트 홈페이지를 통하여 회원에게 공지합니다.
② 유료서비스를 이용하려는 회원은 정해진 요금체계에 따라 요금을 납부해야 합니다.
제 5 장 계약 해지 및 이용 제한
제 15 조 (계약 해지)
회원이 이용계약을 해지하고자 하는 때에는 [가입해지] 메뉴를 이용해 직접 해지해야 합니다.
제 16 조 (서비스 이용제한)
① 당 사이트는 회원이 서비스 이용내용에 있어서 본 약관 제 11조 내용을 위반하거나, 다음 각 호에 해당하는
경우 서비스 이용을 제한할 수 있습니다.
- 2년 이상 서비스를 이용한 적이 없는 경우
- 기타 정상적인 서비스 운영에 방해가 될 경우
② 상기 이용제한 규정에 따라 서비스를 이용하는 회원에게 서비스 이용에 대하여 별도 공지 없이 서비스 이용의
일시정지, 이용계약 해지 할 수 있습니다.
제 17 조 (전자우편주소 수집 금지)
회원은 전자우편주소 추출기 등을 이용하여 전자우편주소를 수집 또는 제3자에게 제공할 수 없습니다.
제 6 장 손해배상 및 기타사항
제 18 조 (손해배상)
당 사이트는 무료로 제공되는 서비스와 관련하여 회원에게 어떠한 손해가 발생하더라도 당 사이트가 고의 또는 과실로 인한 손해발생을 제외하고는 이에 대하여 책임을 부담하지 아니합니다.
제 19 조 (관할 법원)
서비스 이용으로 발생한 분쟁에 대해 소송이 제기되는 경우 민사 소송법상의 관할 법원에 제기합니다.
[부 칙]
1. (시행일) 이 약관은 2016년 9월 5일부터 적용되며, 종전 약관은 본 약관으로 대체되며, 개정된 약관의 적용일 이전 가입자도 개정된 약관의 적용을 받습니다.