• Proceedings of the KIPE Conference
• /
• 2011.07a
• /
• pp.97-98
• /
• 2011

The HVAC(Heating Ventilation and Air conditioning) system is controlled by two ways, one is ON/OFF control and the other is PWM inverter with V/F. Control of blower with the use of PWM inverter has quite some benefits such as the capability of changing speed, high efficiency and reduced noise level compared with ON/OFF control. But if blower is operated at low speed, high THD generated by decrease of ma, and output voltage lowered in proportion to frequency. To solve these problems, filter should be installed at the output stage of inverter, which can decrease THD but has problems such as increase of volume size and additional braking resistance. This paper proposes the PWAM method which can reduce THD instead of installing the filter at the output stage of inverter. The proposed PWAM method is an inverter modulation method that fixes the modulation index of inverter to reduce THD by varying DC link voltage of inverter unlike conventional PWM method. Finally, the validity of proposed PWAM methods verified by experiments.

• Journal of the Korea Fashion and Costume Design Association
• /
• v.14 no.2
• /
• pp.215-227
• /
• 2012

This study aims to analyze the influences of LOHAS cuticle management, which based on LOHAS consciousness among customers using nail art shops and removes only Cuticle layer without Eponychium, on the preference and expected value of service quality. Further, it tackles how above related variables have important bearing on reuse intention. A survey was conducted only with customers over the age of 20 in Seoul, Daejeon and Daegu areas in terms of LOHAS consciousness. For the collected 389 data, frequency analysis, t-test, ANOVA, correlation analysis and multiple regression analysis were carried out by using SPSS 18.0 Version statistical package. The results are as follows. First, according to the results, it shows high positive correlation between LOHAS cuticle management based on the consciousness of LOHAS, and LOHAS cuticle management preference, tendency and willingness to transfer toward it. Second. it is proven that LOHAS consciousness tend to be possessed in older age groups, married and a professional employee layers and this LOHAS motivated groups showed high LOHAS cuticle management preference, inclination and intention of a change in management. Lastly, the reuse intention is mostly affected by experience and preference of LOHAS cuticle management. There is negative correlation between reuse intention and experience in blooding and pain during care service. Higher interest in preference of LOHAS cuticle management has highly influenced positive link with the repurchase intention.

• The Transactions of the Korean Institute of Power Electronics
• /
• v.23 no.5
• /
• pp.352-358
• /
• 2018

A split-capacitor (SC) dual-active-bridge (DAB) converter is proposed in this study. The DC-link capacitors of input and output are split in the proposed converter. The primary and secondary windings of transformer are connected to the midpoints of the DC-links. Hence, the SC DAB converter can inherently prevent transformer from saturation. Although the switch current stress of the proposed converter is twice that of the conventional DAB converter, the switch voltage stress is reduced by half. Therefore, the proposed converter can reduce switching loss and achieve high efficiency in a high switching frequency. Given the SC structure, the proposed converter can readily be connected to neutral-point-clamped- or half-bridge-type converters. The topology of the proposed converter is presented and the operating principle is analyzed in detail. A 3-kW hardware prototype was built and tested to verify the performance of the proposed converter.

• Journal of the Korean Society for Precision Engineering
• /
• v.30 no.10
• /
• pp.1023-1029
• /
• 2013

Water running animals such as basilisk lizards have an advantage of high-speed movement and high power efficiency on water; so researchers in robotic fields have been interested in the water running locomotion. This paper presents prototype-design and experimental study on the fourand six-legged water running robot. Based on the previously proposed quadruped water running robot, we assemble a hexapedal water running robot. The legs of the water running robot are designed based on four-bar parallel link for repeated motion along to pre-defined path. Stability performance of the quadruped and hexapedal water running robot are investigated by experiments on rolling criterion. As a result, hexapedal robot performs better stability than quadruped robot. Based on the hexapedal robot design, we are planning to optimize the position of legs and operating frequency.

• Structural Engineering and Mechanics
• /
• v.82 no.3
• /
• pp.385-400
• /
• 2022

Sky-bridges between adjacent buildings can enhance lateral stiffness and limit the impact of lateral forces. This study analysed the structural capabilities and dynamic performances of sky-bridge-coupled buildings under various sets of ground motions. Finite Element (FE) analyses were carried out with the link being iteratively repositioned along the full height of the structures. Incremental dynamic analysis (IDA) and probabilistic damage distribution were also applied. The results indicated that the establishment of sky-bridges caused a slight change in the natural frequency and mode shapes. The sky-bridge system was shown to be efficient in controlling displacement and Inter-Storey Drift Ratio (%ISDR) and reducing the probability of damage in the higher floors. The most efficient location of the sky-bridge, for improving its rigidity, was found to be at 88% of the building height. Finally, the effects of two types of materials (steel and concrete) and end conditions (hinged and fixed) were studied. The outcomes showed that coupled buildings with a sky-bridge made of steel with hinged connection could withstand ground motions longer than those made of concrete with fixed connection.

• International Journal of Computer Science & Network Security
• /
• v.23 no.5
• /
• pp.121-127
• /
• 2023

A 500 km/h linear motor high speed terrestrial transportation service is planned to launch 2027 in Japan. In order to support 5G service in the train, the Sub-carrier spacing frequency of 30 kHz is planned to be used instead of common 15 kHz sub-carrier spacing to mitigate Doppler effect in such high-speed transportation. In addition, to increase the cell size of 5G mobile system, plural Base Station antenna will transmit the identical Down Link (DL) signal to form the expanded cell size along the train rail. In this situation, forward and backward antenna signals will be Doppler shifted by reverse direction respectively and the receiver in the train might suffer to estimate accurate Channel Transfer Function (CTF) for its demodulation. In this paper, Delay and Doppler Profiler (DDP) based Channel Estimator is proposed and it is successfully implemented in signal processing simulation system. Then the simulated performances are compared with the conventional Time domain linear interpolated estimator. According to the simulation results, QPSK modulation can be used even under severe channel condition such as 500 km/h, 2 path reverse Doppler Shift condition, although QPSK modulation can be used less than 200 km/h with conventional Channel estimator.

• Journal of Positioning, Navigation, and Timing
• /
• v.13 no.1
• /
• pp.63-73
• /
• 2024

NeQuick G is the ionosphere model utilized by Galileo single-frequency users to estimate the ionospheric delay on each user-satellite link. The model is characterized by the effective ionization level (Az) index, determined by a modified dip latitude (MODIP) and broadcast coefficients derived from daily global space weather observations. However, globally fitted Az coefficients may not accurately represent ionosphere within local area. This study introduces a method for regional ionospheric modeling that searches for locally optimized Az coefficients. This approach involves fitting TEC output from NeQuick G to TEC data collected from GNSS stations around Korea under various ionospheric conditions including different seasons and both low and high solar activity phases. The optimized Az coefficients enable calculation of the Az index at any position within a region of interest, accounting for the spatial variability of the Az index in a polynomial function of MODIP. The results reveal reduced TEC estimation errors, particularly during high solar activity, with a maximum reduction in the RMS error by 85.95%. This indicates that the proposed method for NeQuick G can effectively model various ionospheric conditions in local areas, offering potential applications in GNSS performance analyses for local areas by generating various ionospheric scenarios.

• The Transactions of the Korean Institute of Power Electronics
• /
• v.7 no.6
• /
• pp.570-578
• /
• 2002

Cathodic protection is widely used to prevent corrosion of steel materials buried in the underground and sea. As a rectifier for cathodic protection, the conventional phase-controlled rectifiers have been used so far in spite of such shortcomings as large volume, heavy weight and floor power factor. In order to overcome such disadvantages, this paper proposes a new module-type switching rectifier for cathodic protection, which is composed of two parts, namely, AC/DC converter and module- type DC/DC converter. The AC/DC converter is a single-phase IGBT PWM rectifier, thus resulting in almost unity power factor and controlled DC output voltage. The module-type DC/DC converter operates under ZVS/ZCS switching condition to permit high frequency switching operation. It enables to use high-frequency transformer for electrical isolation, thus reducing volume and weight of overall system and improving system efficiency. It should be anticipated that the proposed rectifier techniques apply to the similar technical areas.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.21 no.10
• /
• pp.1999-2007
• /
• 2017

In this paper, we implement a multi-band network selection (MNS) system based on Linux operating system which determines the optimal communication link for given network conditions among the available LTE, very high frequency (VHF), and high frequency (HF). The implemented software consists of a network interface, an MNS server, and a user GUI. We perform indoor test to verify the function of the implemented MNS system using two sets of MNS system. To this end, two types of VHF communication links that follow ITU-R M.1842-1 Annex 1 and Annex 4 are emulated in software. In addition, the HF transmission (reception) port of one MNS is directly connected to the HF reception (transmission) port of another MNS. We demonstrate through indoor tests that the implemented MNS system can support seamless maritime communication service in spite of artificial disconnection or re-connection of LTE, VHFs, and HF. The implemented MNS system is applicable to various maritime communication services including e-navigation.

• The Transactions of the Korean Institute of Power Electronics
• /
• v.6 no.2
• /
• pp.125-131
• /
• 2001

This paper presents a application of vector control strategy to 1.2MVA traction drive for railway vehicle. The vector control required the control of the phase and amplitude of output voltage vector. But in case of traction system for railway vehicle, the one-pulse mode is used at high speed region in order to utilize the link voltage fully. So it is impossible to control the flux and torque axis current instantaneously and independently in the region. So this paper proposes a mixed control algorithm, where the vector control strategy at low speed region and slip-frequency control strategy at high speed region is used. And precise switching technique between the two different control strategy is proposed. The proposed strategy is verified by experimental results with a 1.2MVA traction drive system with four 210kW induction motors.