• Journal of the Korean Institute of Gas
• /
• v.15 no.2
• /
• pp.33-39
• /
• 2011

This study presented quantitative risk analysis in case of transporting explosive materials by railway. Accident types were classified into accidents of in station and in transit. And the study presented an initial value of accident frequency through derailment accident and crushing one according to each type, and drew the results of accident frequency through event tree analysis. Damage impact evaluation used TNT equivalent method and probit analysis method. As the result of risk evaluation, railway transportation of explosive materials passing through areas which are high in population density is appeared to be able to cause a large number of personnel injury when occurring accidents. Specially, the accident of explosive transportation combined with petroleum was forecasted as easily resulting in large explosive accident. Consequently, there is a necessity to reduce consequences by decreasing passage through areas where are high in population density, and take measures for lessening the risks in case of transporting dangerous explosive materials.

• Journal of the Korean Society for Heat Treatment
• /
• v.34 no.2
• /
• pp.66-74
• /
• 2021

Cladding material, which can selectively obtain excellent properties of different metals, is a composite material that combines two or more types of dissimilar metals into one plate. The titanium-copper cladding material between titanium which has excellent corrosion resistance and copper which has high thermal and electrical conductivity, are highly valuable composite materials. It can be used as heat exchangers with high conductivity under severe corrosion conditions. In order to apply the clad plate to the heat exchanger, it must be manufactured in the form of a tube and additional welding is required. It is important to select the cladding material manufacturing process and the welding process. The process of manufacturing the cladding material includes extrusion, rolling, and explosive bonding. Among them, the explosive bonding process is suitable for additional welding because no heat-affected zone is formed. In this study TIG welding of the explosive-bonded dissimilar clad plates was successfully performed by butt welding. The microstructures and bonding interface of the welded part were observed, and the effect of the bonding layer at the welding interface and the intermetallic compounds on the mechanical properties and tensile plastic deformation behaviors were analyzed. And also the integrity of TIG-welded dissimilar part was evaluated.

• Proceedings of the Korean Institute of Building Construction Conference
• /
• 2008.11a
• /
• pp.187-191
• /
• 2008

It is necessary to develop a technology for effectively controling explosive spalling of high strength concrete caused increasing construction of high rise building and putting up the fireproof standard of high strength concrete by MLTM (Ministry of Land, Transport and Maritime Affairs). Accordingly, it was investigated basic properties such as slump, air content and compressive strength, and fire resistance properties of high strength concrete using polypropylene fiber for field application as a countermeasure for explosive spalling of concrete on fire in this study, As a test result, it was confirmed that PP fiber is available as fire resistance method of high strength concrete.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.22 no.6
• /
• pp.573-582
• /
• 2021

In this study, a series of processes for evaluating the effective protection against barriers that should be equipped in institutions that perform reliability tests on high-risk ammunition, such as high-explosive ammunition, were introduced. The impact that high-explosive bombs can have on personnel includes damage to the eardrum and lungs caused by explosion overpressure and penetrating wounds that can be received by fragments generated simultaneously with the explosion. Therefore, a high-explosive with COMP B explosives as its contents were set up, and an explosion protection theory investigation to calculate the degree of damage, numerical calculations and simulations were performed to verify the protection power. A numerical calculation revealed the maximum explosion overpressure on the protective wall when the high-explosive exploded and the penetration force of the fragment against a 50 mm-thick protective wall to be 77.74 kPa and 41.34 mm, respectively. In the simulation verification using AUTODYN, the maximum explosion overpressures affecting the firewall and personnel were 56.68 kPa and 18.175 kPa, respectively, and the penetration of fragments was 35.56 mm. This figure is lower than the human damage limit, and it was judged that the protective power of the barrier would be effective.

• Bulletin of the Korean Chemical Society
• /
• v.30 no.5
• /
• pp.1177-1180
• /
• 2009

• Journal of the Korea Concrete Institute
• /
• v.22 no.2
• /
• pp.229-235
• /
• 2010

In this study, fire resistance performance of high strength concrete specimen with fireproof gypsum board was investigated for possible use in upgrading fire-resistant performance of the existing building and repair of fire damaged structures. Fire test of eight identical high strength concrete columns were carried out for 180 minutes in accordance with ISO-834. The temperature distributions in longitudinal reinforcement and concrete temperature at various depths were recorded. The fireproof performance of gypsum board and explosive spalling of concrete were observed. The specimens with 15 mm thick twoply fireproof gypsum board spalled after gypsum board crumbled regardless of fastening methods. However, when the thickness of fireproof gypsum board was more than 30 mm, it was possible to prevent the explosive spalling and control the rebar temperature. Although the effect of cover thickness could not be compared because the explosive spalling occurred, there seemed to be no difference in insulation efficiency.

• Analytical Science and Technology
• /
• v.28 no.6
• /
• pp.430-435
• /
• 2015

Two-dimensional analysis between the explosive performance and the impact sensitivity for methylnitroimidazole derivatives was performed to understand where these new energetic molecules could be utilized. The explosive performance was analyzed with the Cheetah program, while the impact sensitivity was predicted using neural network analysis. Successive nitration of methylimidazole made the molecule more sensitive, but methyltrinitroimidzole appeared to have a relatively good safety characteristic. We recently developed a novel method to analyze the potential usage of new energetic molecules using a two-dimensional chart, where the explosive performance and the impact sensitivity were located on the X-axis and Y-axis, respectively. An analysis of a two-dimensional plot between the performance and the sensitivity indicated that methyldinitroimidazole would be useful for insensitive explosive formulations, while methyltrinitroimidazole was forecasted for use as an ingredient for high explosive formulations.

• Journal of Biosystems Engineering
• /
• v.34 no.6
• /
• pp.404-410
• /
• 2009

This study was carried out to develop a self-propelled type explosive subsoiler for improving the root zone soil conditions in orchard and other forest fields. Prototype was designed to be able to inject air and other soil improving material such as lime into soil at the same time, and thus improve the air permeability and drainage of orchard soils to promote the root growth of tree for high quality fruit production. Soil penetration device of explosive subsoiler is composed of air hammer, penetration rob and air injection nozzle. To support the soil penetration device of explosive subsoiler to penetrate vertically, modified Scott-Russel mechanism was used. Timing control device for simultaneous injection of soil improving material with air was attached to the out side wall of air cylinder and as the cylinder move, the soil improving material was injected into soil at the same time. Turning radius of prototype was 2.2-2.3 m with good mobility in sloped land. It took approximately 1 minute for lime injection system to reach the optimum pressure of 9.9 kg/$cm^2$, average 10-20 seconds were required to rupture soil with the depth of 50 cm and 2-3 seconds were required for explosion, so all in all about 1 minute and 20 seconds were required for one cycle of explosion. Maximum soil rupture depth and diameter were 50 cm and 3-4 m respectively depending on the soil type and soil moisture content. For final design of explosive subsoiler inclination angle of lime hopper was increased from 60 degree to 70 degree and the shape of hopper was changed from rectangular cone to circular cone to solve the clogging problem of lime at out let. Agitating system operated by compressed air was attached to the metering device of the prototype, thus more than 90 cc of lime was discharged per cycle from metering device without clogging problems.

• Journal of the Korea Institute of Building Construction
• /
• v.12 no.2
• /
• pp.183-193
• /
• 2012

Compressive property of high strength concrete with amorphous metal fibers subject to high temperature has been investigated. The measure of this investigation includes explosive spalling, weight loss, residual compressive strength, strain at peak stress, elastic modulus, and residual energy absorption capacity after exposure to $400^{\circ}C$, $600^{\circ}C$and $800^{\circ}C$. In addition to the amorphous metal fiber, two other types of fibers (polypropylene fiber and hooked-end steel fiber) were also included in this investigation for comparison. The experimental program was conducted with high strength concrete using several combinations of the fiber types. The testing result shows that the concrete with amorphous metal fibers plus polypropylene fibers shows a superior behavior than those using other combination or single fiber type ingredient.

• Journal of the Korea Institute of Military Science and Technology
• /
• v.14 no.5
• /
• pp.948-956
• /
• 2011

In this paper, mechanism design of the explosive ordnance disposal(EOD) manipulator for small unmanned ground vehicle(SUGV) is presented from the conceptual to detailed design. EOD manipulator has been widely developed in the world due to the growing threat of the improvised explosive devices at war. It has distinctive characteristics, such as small size and high loading performance, compared to the industrial manipulator which is fixed on the floor. Design of new EOD manipulator must take into account various functional requirements and constraints simultaneously. We focused on developing the EOD manipulator that has suitable size for the SUGV and maximum 15kg payload capacity. Design approach taken in this paper is based on axiomatic design procedure and comparison among many possible candidates of each joint structure to obtain appropriate entire structure of EOD manipulator.