• Proceedings of the KIEE Conference
• /
• 2001.07c
• /
• pp.1427-1429
• /
• 2001

Polycrystalline silicon(poly-Si) films are deposited on low temperature glass substrate by Hot-Wire CVD(HWCVD). The structural properties of the poly-Si films are strongly dependent on the wire temperature($T_w$). The films deposited at high $T_w$ of 2000$^{\circ}C$ have superior crystalline properties; average lateral grain sizes are larger than $1{\mu}m$ and there at·e no vertical grain boundaries. The surface of the high $T_w$ samples are naturally textured like pyramid shape. These large grain size and textured surface are believed to give high current density when applied to solar cells. However, the poly-si films are structurally porous and contains high defect density, by which high concentration of C and O resulted within the films by air-penetration after removed from chamber.

• Corrosion Science and Technology
• /
• v.22 no.6
• /
• pp.466-477
• /
• 2023

The increasing demand for high-performance energy storage systems has highlighted the limitations of conventional Li-ion batteries (LIBs), particularly regarding safety and energy density. All-solid-state batteries (ASSBs) have emerged as a promising next-generation energy storage system, offering the potential to address these issues. By employing nonflammable solid electrolytes and utilizing high-capacity electrode materials, ASSBs have demonstrated improved safety and energy density. Automotive and energy storage industries, in particular, have recognized the significance of advancing ASSB technology. Although the use of Li metal as ASSB anode is promising due to its high theoretical capacity and the expectation that Li dendrites will not form in solid electrolytes, persistent problems with Li dendrite formation during cycling remain. Therefore, the exploration of novel high-performance anode materials for ASSBs is highly important. Recent research has focused extensively on alloy-based anodes for ASSBs, owing to their advantages of no dendrite formation and high-energy density. This study provides a comprehensive review of the latest advancements and challenges associated with alloy-based anodes for ASSBs.

• Proceedings of the Korean Magnestics Society Conference
• /
• 2002.12a
• /
• pp.116-117
• /
• 2002

High energy mi]ling은 mechanical alloying을 일컫는 분말 제조 공정으로서 금속 뿐 아니라 세라믹스 분말 합성에도 많이 응용되고 있으며, 입자크기의 나노화와 일반적인 세라믹 분말의 특성을 개질할 수 있다는 특징을 갖고 있어서 다양한 연구 결과가 보고되고 있다[1-2]. Ba 및 Sr 페라이트와 같은 육방정 페라이트는 보자력(high coercivity)이 높은 특성을 가지므로 영구자석용, 기록재료용 등으로 광범위하게 사용되어온 재료이다. 이와 같은 높은 보자력을 유지하기 위해서는 입자크기가 단자구 입경(<1 $\mu\textrm{m}$) 보다 작아야 하기 때문에, 초미립자 합성에 관한 많은 연구가 진행되어 왔다[3-4]. (중략)

• Advances in nano research
• /
• v.13 no.5
• /
• pp.475-485
• /
• 2022

Crystalline silicon photovoltaic cells have advantages of zero pollution, large scale and high reliability. A major challenge is that sunlight wavelength with photon energy lower than semiconductor band gap is converted into heat and increase its temperature and reduce its conversion efficiency. Traditional cooling PV method is using water flowing below the modules to cool down PV temperature. In this paper, the idea is proposed to reduce the temperature of the module and improve the energy conversion efficiency of the module through the modulation of the solar spectrum. A spectrally selective nanofilm reflector located directly on the surface of PV is designed, which can reflect sunlight wavelength with low photon energy, and even enhance absorption of sunlight wavelength with high photon energy. The results indicate that nanofilm reflector can reduce spectral reflectivity integral from 9.0% to 6.93% in 400~1100 nm wavelength range, and improve spectral reflectivity integral from 23.1% to 78.34% in long wavelength range. The nanofilm reflector can reduce temperature of PV by 4.51℃ and relatively improved energy conversion efficiency of PV by 1.25% when solar irradiance is 1000 W/m². Furthermore, the nanofilm reflector is insensitive in sunlight's angle and polarization state, and be suitable for high irradiance environment.

• Korean Journal of Community Nutrition
• /
• v.20 no.1
• /
• pp.41-52
• /
• 2015

Objectives: Korean elderly people are known to consume diets high in carbohydrates low in vegetables compared to other age groups. This study evaluated the chronic disease risks and nutritional status in this group based on the percentage of energy from carbohydrates and the frequency of vegetable intake. Methods: Using the 2007~2009 Korean National Health Nutrition Examination Survey data, except those who were undergoing treatment for chronic disease, final 1,487 subjects aged 65 and older were divided into 4 groups: moderate carbohydrate energy ratio of 55~70% and low frequency of vegetable intake defined as less than 5 times per day (MCLV), moderate carbohydrate ratio and high frequency of vegetable intake more than 5 times (MCHV), high carbohydrate energy ratio above 70% and low frequency of vegetable intake less than 5 times (HCLV), and high carbohydrate ratio and high frequency of vegetable intake more than 5 times (HCHV). All data were analyzed after the application of weighted value, using a general linear model or logistic regression. Results: More than half of Korean elderly consumed diets with HCLV, and this group showed poor nutritional status and lower frequency of intake of most food items, but with no risk of chronic disease such as diabetes, obesity, hypertension, cardiovascular disease or anemia probably due to low intake of energy. On the contrary, MCHV group with a high percentage of energy from fat and protein showed the highest intake of energy and most nutrients, the highest frequency of intake of most of food items and a tendency of high risk of abdominal obesity, being followed by the MCLV group. Meanwhile, HCHV group showed a tendency of high risk of hypertension, followed by HCLV group with low frequency of intake of vegetables compared with the two moderate carbohydrate groups. Conclusions: The results suggested that the percentage of energy from carbohydrate and the frequency of vegetable intake affected the nutritional status, but not significantly affected the risk of chronic disease in Korean elderly. Further studies using more detailed category of % energy from carbohydrates and of type and amount of vegetables with consideration of individual energy intake level, excessive or deficient, are needed to confirm the results.

• Korean Journal of Exercise Nutrition
• /
• v.15 no.4
• /
• pp.163-171
• /
• 2011

The effects of a high-fat diet and fasting on resting energy expenditure and energy substrate utilization were examined using the method of measuring whole body energy metabolism and oxygen uptake. Eight 4-week old male Sprague-Dawley rats were used for the high-fat diet experiment. Energy metabolism was measured using acrylic metabolic chambers over 24 hours. After 1-week of preliminary feeding, 4 rats were fed a chow diet, whereas the remaining 4 rats were fed a high-fat diet (HF) ad libitum, which contained 40% (w/w, calorie base 60%) more fat than that in the chow diet. The flow rate to measure energy metabolism inside the chamber was controlled at a mean of 3.5 L/min, and five chambers were subjected to measurement. One of the five chambers was used to correct errors by measuring the atmosphere. As a result of 5 weeks of control diet and high-fat diet feeding, body weight of the high-fat diet group tended to increase more than that in the control diet fed group, but the difference was not significant. Oxygen uptake and carbon dioxide production changed as time went on over the 24 hr. The respiratory exchange ratio also changed during the 24 hr, and the difference between the groups was significant. The control group showed significantly more carbohydrate oxidation than that of the high-fat diet fed group. A fasting experiment was conducted using six 7-week old Sprague-Dawley male rats. Energy metabolism measurements were performed using the same method as that used in the high-fat diet experiment; resting metabolism was measured prior to fasting, and a fasting condition began from 9:00 am the next day for 3 days to calculate energy metabolism. Both body weight and 24-hour oxygen uptake decreased significantly as a result of 3-day fasting. Total oxygen uptake in the first day decreased, and declined significantly on day 3 of fasting. Total 24-hour carbon dioxide production decreased significantly over the 3 days. The mean 24-hour respiratory exchange ratio decreased significantly. Additionally, energy expenditure during the dark period (20:00-08:00), which is the active period for rats, decreased significantly with fasting, whereas energy expenditure during the light period (08:00-20:00) did not increase by fasting.

• Corrosion Science and Technology
• /
• v.12 no.2
• /
• pp.102-112
• /
• 2013

A very high-temperature gas reactor (VHTR) is one of the next generation nuclear reactors owing to its safety, high energy efficiency, and proliferation-resistance. Heat is transferred from the primary helium loop to the secondary helium loop through an intermediate heat exchanger (IHX). Under VHTR environment Alloy 617 is being considered a candidate Ni-based superalloy for the IHX of a VHTR, owing to its good creep resistance, phase stability and corrosion resistance at high temperature. In this study, high-temperature corrosion tests were carried out at 850 - $950^{\circ}C$ in air and impure helium environments. Alloy 617 specimens showed a parabolic oxidation behavior for all temperatures and environments. The activation energy for oxidation was 154 kJ/mol in helium environment, and 261 kJ/mol in an air environment. The scanning electron microscope (SEM) and energy-dispersive x-ray spectroscopy (EDS) results revealed that there were a Cr-rich surface oxide layer, Al-rich internal oxides and depletion of grain boundary carbide after corrosion test. The thickness and depths of degraded layers also showed a parabolic relationship with the time. A corrosion rate of $950^{\circ}C$ in impure helium was higher than that in an air environment, caused by difference in the outer oxide morphology.

• Journal of KIISE:Computer Systems and Theory
• /
• v.33 no.7
• /
• pp.390-398
• /
• 2006

The objective of the High Energy Physics(HEP) is to understand the basic properties of elementary particles and their interactions. The CMS(Compact Muon Solenoid) experiment at CERN which will produce a few PetaByte of data and the size of collaboration is around 2000 physicists. We cannot process the amount of data by current concept of computing. Therefore, an area of High Energy Physics uses a concept of Tier and Data Grid. We also apply Data Grid to current High Energy Physics experiments. In this paper, we report High Energy Physics Data Grid System as an application of Grid.

• 한국초전도학회:학술대회논문집
• /
• v.9
• /
• pp.310-314
• /
• 1999

A prototype of Flywheel Energy Storage System with high Tc superconducting bearings was fabricated and tested to verify its applicability for the energy industry. The moment of inertia of assembled wheel with rotor magnets is about 1.072${\times}$10$^{-1}$ Kg-m$^2$. The wheel was designed to withstand its integrity up to the rotation speed of 20,000 rpm. YBCO bulk superconductors prepared by seed growth method were used as bearing to levitate and stabilize the rotating wheel. High speed rotation of the flywheel without mechanical contact was achieved by using specially designed Halbach type motor. The flywheel system showed very high stability during test operation performed up to the speed of about 10,000rpm. The energy loss measured by free decay test performed between 9,300 rpm and 7,000 rpm was calculated as about 45 W.

• Composites Research
• /
• v.25 no.5
• /
• pp.147-153
• /
• 2012

In this paper, static perforation tests are conducted to predict the penetration energy for the composite laminates subjected to high velocity impact. Three methods are used to analyze the perforation energy accurately. The first method is to select the perforation point using the AE sensor signal energy, the second method is to retest the tested specimen and use the difference between initial and retested perforation energy, and the third method is to select the perforation point based on the maximum loading point in the retested load-displacement curve of the tested specimen. The predicted perforation energy results are presented and verified by comparing with those by the high velocity tests.