• 조명전기설비학회논문지
• /
• 제14권2호
• /
• pp.46-51
• /
• 2000

초음파의 안정한 발생은 주로 고주파의 에너지변환효율과 부하변화에도 안정된 출력을 얻을수 있는 요인에 의존한다, 본 논문에서는 고효율과 안정성을 갖는 초음파발생회로의 모델을 제시하고 설계하였다. 방법으로는 부하의 전압,전류의 위상차를 검출하여 발진주파수를 PLL에 의해 추종하게 하였고 출력단 전압과 전류흘 검출하는 방식으로 Multiplier를 사용해서 출력에 비례하는 신호를 얻어 사역폭을 조절해서 부하변화에도 출력이 안정되게 설계하고 회로의 해석결과를 시뮬레이션과 실험을 통해 확인하였다.

• 환경위생공학
• /
• 제18권4호
• /
• pp.1-5
• /
• 2003

For studying out the method of the effective purification of waste waters such as dying, paper pulp and plating wastewater, we measured the COD removal efficiency, color and turbidity of those pollutants by the physical and chemical method using the Inorganic Coagulating Agent (CM, RM) and a High Voltage Generator. The COD removal efficiency measured when applying the Inorganic Coagulating Agent (CM, RM) was mush higher than that using the Existing Coagulating Agent In addition to, when using those two methods above mentioned at the same time, both the COD removal efficiency and the reduction-effect of the inserting quantities of Coagulating Agent were higher than those were used singly. The system using both an Inorganic Coagulating Agent and a High Voltage Generator will be useful in various fields of wastewater treatment.

• 센서학회지
• /
• 제21권4호
• /
• pp.298-302
• /
• 2012

This paper describes the design and fabrication of a low frequency vibration driven high-efficiency electromagnetic energy harvester based on FR(Flame Resistance)-4 spring which converts mechanical energy into useful electrical power. The fabricated generator consists of a vertically polarized NdFeB permanent magnet attached to the center of spring and a planar type copper coil which has higher efficiency compare with cylindrical type coil. ANSYS finite analysis and Matlab were used to determine the resonance frequency and output power. The generator is capable of producing up to 1.36 $V_{pp}$ at 9 Hz, which has the maximum power of 639 ${\mu}W$ with a load resistance of $3.25k{\Omega}$.

• 한국정보통신학회:학술대회논문집
• /
• 한국해양정보통신학회 2007년도 추계종합학술대회
• /
• pp.776-780
• /
• 2007

본 논문에서는 저전압 DRAM용 VPP Generator의 전하펌프회로(Charge Pump Circuit)를 새롭게 제안하였다. 제안된 전하펌프회로는 2-Stage 크로스 커플 전하펌프회로(Cross-Coupled Charge Pump Circuit)이다. 4개의 비중첩 클럭신호들을 이용하여 전하전달 효율을 향상시켰고, 각 전하펌프단 마다 Oscillation 주기를 줄일 목적으로 Distributed Clock Driver인 Inverter 4개를 추가하여 펌핑전류(Pumping Current)를 증가시켰다. 그리고 전하전달 트랜지스터의 게이트단에 프리차지회로 (Precharge Circuit)를 두어 대기모드진입 시 펌핑된 전하를 방전하지 못하고 고전압을 유지하여 소자의 신뢰성을 떨어트리는 문제를 해결하였다. 모의실험결과 펌핑전류, 펌핑효율(Pumping Efficiency), 파워효율(Power Efficiency) 모두 향상된 것을 확인하였고, $0.18{\mu}m$ Triple-Well 공정을 이용하여 Layout 하였다.

• Journal of Electrical Engineering and Technology
• /
• 제13권5호
• /
• pp.1956-1964
• /
• 2018

Since the stator winding of High-Speed Permanent Magnet Generator (HSPMG) has few winding turns and low inductance value, it is more prone to be influenced by harmonic current. Moreover, the operation efficiency and the torque stability of HSPMG will be greatly influenced by harmonic current. Taking a 117 kW, 60 000 rpm HSPMG as an example, in order to analyze the effects of harmonic current on HSPMG in this paper, the 2-D finite element electromagnetic field model of the generator was established and the correctness of the model was verified by testing the generator prototype. Based on the model, the losses and torque of the generator under different frequency harmonic current were studied. The change rules of the losses and torque were found out. Based on the analysis of the influence of the harmonic phase angle on torque ripple, it is found that the torque ripple could be weakened through changing the harmonic phase angle. Through the analysis of eddy current density in rotor, the change mechanism of the rotor eddy current loss was revealed. These conclusions can contribute to reduce harmonic loss, prevent demagnetization fault and optimize torque ripple of HSPMG used in distributed power supply system.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 1995년도 추계학술대회 논문집 학회본부
• /
• pp.499-501
• /
• 1995

In this paper, the generation of the intensive ultrasonic waves depend mainly on the energy convention efficiency depending on high frequency oscillation of the generator and the control performance of stable output depending on iode variation. As a result, the ultrasonic generator obtained of 95% differency with 28khz.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 1999년도 추계학술대회 논문집
• /
• pp.129-131
• /
• 1999

Driving generator of USMs(ultrasonic motors) with low noise, high efficiency was designed and fabricated. It was focused on merits such as size-reduction, thermal resistance, To control revolution speed, input frequency was varied. Output of generator had frequency range of 39.1 ∼ 43.5 MHz and voltage of 120 V. USM with resonant frequency 40.3 kHz exhibited a maximum torque of 2.5 kg $.$ cm and a maximum revolution speed of about 130 rpm.

• 한국정보기술학회논문지
• /
• 제15권12호
• /
• pp.181-188
• /
• 2017

레저 활동 인구의 증가와 다양화로 이동용 전력 시스템에 대한 수요가 많고 친환경적인 전력 발전 시스템에 대한 요구가 늘어나고 있으며 이를 충족 시킬만한 발전 장비로 소형 풍력 발전시스템이 대안으로 떠오르고 있다. 이동용 소형 풍력발전기를 개발할 때 가장 중요한 사항으로는 발전기의 무게를 줄이고 효율을 증가시키는 것이다. 기존의 300W급 풍력 발전기의 무게는 10kg정도로 이를 4kg이하로 줄여서 휴대가 용이하게 하면서 고 효율의 풍력 발전기용 발전기를 설계 제작하였다. 또한, 돌풍이 발생하는 한국의 풍량과 지형의 특성상 미풍에서도 발전이 가능하고 도심 및 농어촌 등에서도 독립적으로 사용할 수 있는 소형 풍력발전기를 설계 제작하였다. 기초설계 및 최적화설계를 통해 가볍고 효율이 높은 발전기를 제작하였다. 본 논문에서는 중량을 줄인 300W급 풍력발전기를 설계하고 시제품으로 제작 하였다. 제작한 300W 풍력발전기는 무부하 시험 시 정격속도 900rpm에서 평균출력전압이 24.7V이었으며, 제작된 발전기의 부하시험시 평균 선간전압 : 36.8V, 평균 상전류 : 2.62A로 기계적 입력이 339.84W일 때 출력전력은 289.5W로 측정되었고 이때의 효율은 85.18%이었다. 제작된 발전기 무게는 3.84kg이었다.

• 한국기계가공학회지
• /
• 제15권4호
• /
• pp.141-147
• /
• 2016

A direct PM generator has the effect of reducing the mechanical noise and ease of maintenance by eliminating a number of power transmission components. In addition, wind turbines operating at low speed with the advantages of high output, high efficiency, and small size. The generator was designed as a small direct-drive PM generator that can be applied to a kite even at low wind speeds. The RPM (Revolutions Per Minute) of the reel was measured in two ways using a cadence/speedometer sensor and a tachometer while the actual kite. The RPM derived from the experiment was applied to the simulation on the designed generator. The no-load characteristic analysis for the magnetic fields produced for the permanent magnet generator by a permanent magnet and stator winding currents is achieved using a 2D coordinate system. A commercial electromagnetic analysis program, ANSYS Maxwell, was used to model the electromagnetic dynamics.

• Journal of Power Electronics
• /
• 제17권6호
• /
• pp.1422-1432
• /
• 2017

This paper presents a buck-boost converter-based bipolar pulse generator, which is able to generate bipolar exponential pulses across a resistive load. The concept of the proposed approach depends on operating the involved buck-boost converters in discontinuous current conduction mode with high-voltage gain and enhanced efficiency. A full design of the pulse generator and its passive components is presented to ensure generating the pulses with the desired specifications (rise time, pulse width, and pulse magnitude) for a given load resistance and input dc voltage. In case of moderate pulsed output voltages (i.e. few of kV), one module of the presented bipolar generator can be employed. While in case of high-voltage pulsed output, multi-module version can be employed, where each module is fed from an isolated dc source and their outputs are connected in series. Simulation models for the proposed approach are built to elucidate their performance in case of one-module as well as multi-module based generator. Finally, a scaled-down prototype for one-module of buck-boost converter-based bipolar pulse generator is implemented to validate the proposed concept.