• 항공우주시스템공학회지
• /
• 제9권2호
• /
• pp.1-6
• /
• 2015

태양광 고고도 장기체공형 무인기나 인간동력 항공기 등에 사용되는 높은 종횡비를 가진 유연날개는 공력 및 구조 상호작용으로 인하여, 구조적 비선형 처짐 및 양력감소 등의 문제가 발생한다. 본 연구에서는 저속 비행하는 높은 종횡비를 가진 날개의 단방향 공력-구조 연계해석을 수행하였다. XFOIL을 사용하여 공력천이현상을 포함한 저 레이놀즈수 익형 공력특성 자료 확보를 기반으로 3차원 양력선 이론을 사용하여 공력해석 연구를 수행했다. 구조해석은 상용소프트웨어 ANSYS를 사용하여 구조변형이나 응력해석 연구를 수행했다. 단방향 공력-구조 연계해석 결과를 바탕으로 인간동력 항공기 주 날개의 형상설계 연구를 수행했다.

• 전기학회논문지
• /
• 제65권3호
• /
• pp.493-498
• /
• 2016

Heart Rate Variability (HRV) represents beat-to-beat fluctuations of R-R intervals in Electrocardiogram (ECG). On of the clinical applications of HRV is to assess the mental-stress state by evaluating its power spectral density distribution. This study aims at finding new discriminative role of the coupled-oscillating coupling constants, Cs and Cp in the Integral Pulse Frequency Modulation (IPFM) model. Based on comparing with power spectral density of HRV in terms of the relative ratio of the low and high-frequency power component, we can conclude the fact that the coupling parameters Cs and Cp can replace the role of HRV power spectrum interpretation for judging the mental-stress state.

• 전기학회논문지
• /
• 제56권8호
• /
• pp.1430-1435
• /
• 2007

We developed a 440MHz surface acoustic wave (SAW) microsensor integrated with pressure-temperature sensors and ID tag. Two piezoelectric substrates were bonded, in which ${\sim}150\;{\mu}m$ cavity was structured. Four sides were completely sealed by JSR photoresist (PR). Pressure sensor was placed on the top substrate, whereas ill tag and temperature sensor were placed on the bottom substrate. Using network analyzer, the developed microsensor was wirelessly tested. Sharp reflection peaks with high S/N ratio, small signal attenuation, and small spurious peaks were observed. All the reflection peaks were well matched with the coupling of mode (COM) simulation results. With a 10mW RF power from the network analyzer, a ${\sim}1$ meter readout distance was observed. Eight sharp ON reflection peaks were observed for ID tag. Temperature sensor was characterized from $20^{\circ}C$ to $200^{\circ}C$. A large phase shift per unit temperature change was observed. The evaluated sensitivity was ${\sim}10^{\circ}/^{\circ}C$.

• 한국응용과학기술학회지
• /
• 제13권1호
• /
• pp.67-74
• /
• 1996

This study was conducted to find a catalyst system which has high conversion and selectivity for the oxidative coupling of methane to produce ethane and ethylene. Various catalysts were tested in a fixed bed reactor ar $750^{\circ}C$, 1 atm, and the feed ratio($CH_4/O_2$) of 2/1. Under the reaction condition, 10wt%$PbSO_4/MgO$ catalyst showed the highest catalytic activity : methane conversion, $C_2$ selectivity and yield were 50, 40 and 20%, respectively. Catalysts containing sulfate compounds, 10wt%$PbSO_4/MgO$, 10wt%$MgSO_4/MgO$ and $Na_2SO_4/MgO$ revealed a moderate methane conversions such as 38, 50 and 50%, respectively and low $C_2$ selectivities such as 18, 5 and 9%, respectively. Catalysts containing carbonate compounds, 10wt%$PbCO_3/MgO$, 10wt%$Li_2CO_3/MgO$ and $NaCO_3/MgO$, also showed a moderate methane conversions such as 64, 44 and 51%, respectively and low $C_2$ selectivities such as 5, 6 and 2%, respectively. With the existence of chlorine and mercury, $C_2$ selectivity was decreased.

• Korea-Australia Rheology Journal
• /
• 제20권1호
• /
• pp.15-26
• /
• 2008

It has been known that there is a viscoelastic instability in the channel flow past a cylinder at high Deborah (De) number. Some of our numerical simulations and a boundary layer analysis indicated that this instability is related to the shear flow in the gap between the cylinder and the channel walls in our previous work. The critical condition for instability initiation may be related to an inflection velocity profile generated by the normal stress near the cylinder surface. At high De, the elastic normal stress coupling with the streamline curvature is responsible for the shear instability, which has been recognized by the community. In this study, an instability criterion for the flow problem is proposed based on the analysis on the pressure gradient and some supporting numerical simulations. The critical De number for various model fluids is given. It increases with the geometrical aspect ratio h/R (half channel width/cylinder radius) and depends on a viscosity ratio ${\beta}$(polymer viscosity/total viscosity) of the model. A shear thinning first normal stress coefficient will delay the instability. An excellent agreement between the predicted critical Deborah number and reported experiments is obtained.

• 한국항공우주학회지
• /
• 제34권3호
• /
• pp.31-36
• /
• 2006

본 연구에서는 천음속미소교란 및 대변형 보 이론을 이용하여 대변형이 발생되는 가로세로비가 큰 날개의 비선형 정적 공탄성 해석 시스템을 개발하고 검증하였다. 유체/구조간 직접 연계를 위하여 구조 격자에서 유체 격자로의 변위의 변환은 보 유한 요소 모델에 사용된 형상 함수를 유체 격자에서 구조 격자로의 힘의 변환은 일 등가 하중의 개념을 사용하였다. 그리고 이러한 날개의 정적 공탄성 해석 시, 이론적으로 TSD 공기력 사용의 타당성을 보였다. 또한 본 연구에서의 검증은 직접 연계된 공탄성 시스템의 효율적인 힘/변위 변환 기법의 검증을 포함한다.

• 한국전기전자재료학회논문지
• /
• 제13권3호
• /
• pp.220-226
• /
• 2000

The piezoelectric material for piezoelectric transformer needs the high electromechanical coupling factor( $k_{p}$) the piezoelectric constant( $d_{33}$) and the mechanical quality factor( $Q_{m}$)in order to obtain high voltage step-up ratio and low temperature rising. In this study the piezoelectric transformers were fabricated using Pb［$Zr_{0.45}$/ $Ti_{0}$48//L $u_{0.02}$(M $n_{1}$3//S $b_{2}$3/)$_{0.05}$］ $O_3$(PMS-PZT) and Pb［Z $r_{0.25}$/ $Ti_{0.375}$(M $g_{1}$3//N $b_{2}$3/)$_{0.375}$］ $O_3$+0.5wt%Mn $O_2$(PMN-PZT) ceramics. The piezoelectric properties of PMS-PZT and PMN-PZT were measured. The voltage set-up ratios of the piezoelectric transformers using PMS-PZT and PMN-PZT were the value of 15, 20 respectively under 100$_{KΩ}$ in Rosen type transformer.r.ormer.r.r.r.r.r.r.

• 국제초고층학회논문집
• /
• 제9권2호
• /
• pp.167-173
• /
• 2020

W-Project is 60-story mixed-use residential building complex project in Daegu, the third biggest city in South Korea. There are lots explorable items to be solved to secure structural safety and meet the serviceability requirements. This paper describes what kind of structural system is optimized based on the architectural requirements and structural components design and the grade of concrete strength altered on floors. The defining process of lateral resisting system of outrigger compared to the core ratio of typical plan is illustrated in detail.

• 한국고분자학회:학술대회논문집
• /
• 한국고분자학회 2006년도 IUPAC International Symposium on Advanced Polymers for Emerging Technologies
• /
• pp.161-161
• /
• 2006

New polymeric and oligomeric OTFT materials containing fused aromatics such as anthracene and naphthalene have been designed, synthesized and characterized. The new OTFT materials were prepared by palladium-catalyzed Suzuki cross-coupling reaction. The obtained materials were characterized by various spectroscopic methods such as UV-vis, PL, cyclovoltametry, and XRD. The obtained OTFT materials containing fused aromatics showed high thermal stability above $350^{\circ}C$ In OTFT devices using new materials, high charge carrier mobility and on/off ratio were observed.

• 한국전산유체공학회:학술대회논문집
• /
• 한국전산유체공학회 1997년도 추계 학술대회논문집
• /
• pp.143-148
• /
• 1997

Differential pressure Venturi cone flowmeter is an advanced flowmeter which has many advantages such as wide range of measurement, high accuracy, excellent flow turndown ratio, low headless, and short installation pipe length requirement, etc. Like other differential pressure flowmeter, Venturi cone flowmeter uses the law of energy conservation, but its shape and position make it perform better than others. The cone acts as its own flow conditioner and mixer, fully conditioning and mixing the flow prior to measurement. For the analysis, we use Reynolds-averaged Navier-Stokes equations and $k-{\omega}$ turbulence model. The equations are fully trans-formed in the computational coordinates, the pressure-velocity coupling is made through SIMPLER algorithm, and the equations are discretized using analytic solutions of the linearized equations(Finite Analytic Method). At the end of the paper, using the result of analysis, We propose a new shape of cone with the hope of drag reduction and high performance.