• Journal of Nutrition and Health
• /
• v.26 no.2
• /
• pp.154-154
• /
• 1993

A factorial experiment was conducted to determine the influence of phytate(0 or 10g/kg diet) and calcium (Ca)(3 or 10g/kg diet) intakes on Ca, P and Zn metabolism by growing female rats. Food intake and weight were similar for the all groups, however, phytate ingestion for six weeks depressed femur growth. The low Ca plus phytate group showed the lowest Ca content of total femur and this was related to a significant decrease of Ca retention. Phytate intake depressed zinc(Zn) absorption in the first metabolic collection. This inhibitory effect of phytate on Zn absorption was improved in the low Ca plus phytate group after several weeks. Impared Zn absorption however remained in the high Ca plus phytate group which was reflected in the lowest Zn content of femur, phytate intake with high Ca also depressed phosphorous(P) absorption and serum and urinary P. These adverse effects of phytate on Zn and P absorption when the dietary Ca was high could explain reduced femur weight despite the highest concentration of femur Ca(mg/g ash) in this group. Results suggest that phytate can adversely affect not only Ca metabolism but Zn and P utilization. Thus, for the normal bone growth when phytate intake is high, the ingesion of Ca, P, Zn and other minerals should be enhanced.

• Journal of Korean Society of Environmental Engineers
• /
• v.28 no.6
• /
• pp.661-666
• /
• 2006

The compressive strength of a paste composed of a low-calcium Class F fly ash and alkaline activator solutions was investigated. These activator solutions, made with sodium hydroxide, water glass and water, have a very high $OH^-$ concentration. The composition of alkaline activator solution and temperature have been shown to notably influence the development of the compressive strength of the fly ash-cements paste. Compressive strength of 50 MPa could be achieved by curing of the fly ash at $60^{\circ}C$ for 48 hrs or $85^{\circ}C$ for 24 hrs. This study presented the optimum mixing ratio of Class F fly ash/sodium hydroxide/water glass as 25:8:2 in weight basis, and activator/fly ash as 0.6/1.0 for high strength paste.

• Proceedings of the Korea Concrete Institute Conference
• /
• 2009.05a
• /
• pp.565-566
• /
• 2009

Supplementary cementing materials (SCM), such as silica fume, slag, and low-calcium fly ash, have been widely used as mineral admixtures in high strength and high performance concrete. Due to the chemical and physical effect of SCM on hydration, compared with Portland cement, hydration process of cement incorporating SCM is much more complex. This paper presents a numerical hydration model which is based on multi-component concept and can simulate hydration of cement incorporating SCM. The proposed model starts with mixture proportion of concrete and considers both chemical and physical effect of SCM on hydration. Using this proposed model, this paper predicts the following properties of hydrating cement-SCM blends as a function of hydration time: reaction ratio of SCM, calcium hydroxide content, heat evolution, porosity, chemically bound water and the development of the compressive strength of concrete. The prediction results agree well with experiment results.

• Journal of the Korean Recycled Construction Resources Institute
• /
• v.11 no.4
• /
• pp.364-372
• /
• 2023

By applying coarse-grained limestone and unprocessed coal ash as sintering raw materials for cement clinker, the microstructure and distribution of chemical components of cement clinker were compared and examined. Samples using coarse limestone as a raw material for cement clinker showed a decrease in sinterability compared to samples using reagent-grade raw materials. Samples using coal ash showed a tendency for some increase in sinterability. In samples using coarse limestone and coal ash, the formation of Belite was high at 1350 ℃. The conversion rate from Belite to Alite was high in the range of 1350~1450 ℃. Samples using coal ash showed stable formation of interstitial phase in the range of 1350 to 1450 ℃. The microstructure and chemical composition distribution of cement clinker sintered at 1350~1450 ℃ showed that all samples showed a form and composition distribution in which the calcium silicate phase and interstitial phase were clearly distinguished.

• Journal of Korea Technical Association of The Pulp and Paper Industry
• /
• v.42 no.1
• /
• pp.1-6
• /
• 2010

Paper industry in Korea produces 14 million tons of paper and 1.3 million tons of sludge per year. Most of them has been treated by incineration, landfilling or ocean dumping. The sludge recycling to minimize the impact on the environment, so its importance is highlighted. In this study, in order to develop a new way of recycling the sludge, it was calcined and the recycled ash was tried to use as papermaking filler. Concerning the yield of calcium carbonate and the brightness and the rheology of the recycled calcination sludge, the optimum calcination conditions were found to be $600^{\circ}C$ and 12 hours. The sludge ash itself was not suitable for papermaking due to its color and low brightness. Thus the ash from the sludge was first mixed with a commercial filler and then utilized for papermaking. The effect of the increased hardness after high temperature treatment on wire abrasion was confirmed.

• Preventive Nutrition and Food Science
• /
• v.9 no.1
• /
• pp.45-52
• /
• 2004

Effects of dietary calcium lactate (CaL-A) and Chungkukjang (Korean native fermented soybean) on bone mass, calcium status, body weight, serum glucose and cholesterol levels in young male rats were investigated. Chungkukjang was fermented by mixing 4 types of Bacillus sp., and then dried at 45$^{\circ}C$. Calcium lactate was prepared from the ash of black snail. The rats were fed a commercial rat diet for 1 week and then the experimental diets for 4 weeks. Animals were divided into four dietary groups: one calcium-deficient diet (Ca-De) and one of three with calcium supplemented diets (5 g calcium/kg diet) with either calcium phosphate (Ca-P), CaL-A, or CaL-A + Chuntkukjang (CaL-AC). Calcium supplemented diets contained 39 g Ca-P/kg diet and 28 g/kg of calcium lactate in the CaL-A and CaL-AC diets. Body weight gains during the 4 weeks in the Ca-P, CaL-A, CaL-AC and Ca-De groups were 130.45 g,112.50 g, 143.40 g and 10.20 g, respectively. Feed consumption of the groups from high to low was CaL-AC > Ca-P > CaL-A > Ca-De. The Ca-De group had low femur weights and low serum calcium concentrations, while they were comparatively high in CaL-AC, Ca-P and CaL-A groups. The Ca-De groups excreted less calcium in urine than did the other rats, probably due to increased absorption of the mineral in Ca-P, CaL-A and CaL-AC groups. Microscopic observations revealed that there were many regularly spaced holes in the femur of Ca-De group, while there were much smaller regularly spaced holes in Ca-P group. However, no holes in femur were observed in the CaL-A and CaL-AC groups. Bone surfaces were especially smooth and clean in the CaL-AC group. Serum concentrations of glucose and total cholesterol were remarkably lower in the CaL-AC group than in the other supplemented groups. These results suggest that calcium from CaL-A has higher bioavailability than from Ca-P, and dietary Chungkukjang may have a beneficial effect on calcium metabolism.

• Korean Journal of Fisheries and Aquatic Sciences
• /
• v.36 no.3
• /
• pp.198-203
• /
• 2003

Heat-induced surimi gels were prepared using various concentration of ATC as a additives and calcium agent. Regardless of various concentration of ATC, there were no difference the moisture $(80.4-81.2\%)\;and\;crude\;ash\;(1.4-1.\5%)$ contents. The pH of heat-induced surimi gels were decreased 7.16 to 7.04 depend on increasing ATC concentration. The whiteness, breaking force and gel strength of $0.09\%$surimi gel were improved significantly difference (p<0.05). Sensory evaluation on texture and whiteness were also similar to determination by color and texture meters. In mineral content of heat-induced surimi gel calcium content was increased 26 to 54 mg/100g depend on increasing ATC concentration, while phosphorus content was not change. The optimal concentration of ATC for preparation of high quality heat-induced surimi gel was $0.09\%$. The shelf-life of heat-induced surimi gel did not extend by addition of $0.09\%$ ATC.

• Korean Journal of Fisheries and Aquatic Sciences
• /
• v.36 no.2
• /
• pp.80-87
• /
• 2003

Recovery conditions and characteristics of a high molecular soluble protein from surimi processing wastewater in marine manufacture using calcium powder of cuttle bone treated with acetic acid (ATC) were examined. Judging from results of total-N, pH, COD, turbidity and yields, optimal treatment concentration of ATC for recovery of high molecular soluble proteins from wastewater was $1.0\%.$ The protein recovered from seafood waste (PRW) was macromolecule weight. The COD value in the wastewater treated with ATC was very high. The PRW had a $78.4\%$ in moisture, $1.0\%$ in crude lipid and $5.7\%$ in crude ash. The proximate composition, except the crude ash, of the PRW was similar to that of commercial surimi. The PRW showed white index and similar in the content and in the composition of total amino acid to those of commercial surimi. From the results of sensory evaluation on white index and texture, the heat-induced surimi gel prepared with $5\%$ subsititution of the PRW for bulking agent of commercial surimi was not significantly different compared to that prepared with the original commercial surimi.

• Journal of The Korean Digital Architecture Interior Association
• /
• v.12 no.4
• /
• pp.59-66
• /
• 2012

This study is interested in identifying the effectiveness of alkali-activated fire protection material compounds including the alkali-activator such as potassium hydroxide, sodium silicate and fly ash as the fire resistant finishing materials. Also, this paper is concerned with change in compressive strength and pore structure of the alkali-activated fire protection material at high temperatures. The testing methods of fire protection materials in high temperature properties are make use of TG-DSC and mercury intrusion porosimetry measurements. This study results show that compressive strength is rapidly degraded depending on a rise of heating temperature. Porosity showed a tendency to increase irrespective of specimen types. This is due to both the outbreak of collapse of gel comprising the cement and a micro crack by heating. However, alkali-activated fire protection material composed of potassium hydroxide, sodium silicate and fly ash has the thermal stability of the slight decrease of compressive strength and porosity at high temperature. These thermal stability is caused by the ceramic binding capacity induced by alkali activation reaction by the reason of the thermal analysis result not showing the decomposition of calcium hydrate.

• Advances in concrete construction
• /
• v.7 no.4
• /
• pp.263-275
• /
• 2019

In the present work, Granulated Blast Furnace Slag (GBFS) and Fly ash (FA) were used as partial replacement of Natural Sand (NS) and Ordinary Portland Cement (OPC) by weight. One control mix, one with GBFS, three with FA and three with GBFS-FA combined mixes were prepared. Replacements were 50% GBFS with NS and 20%, 30% and 40% FA with OPC. Preliminary investigation on development of compressive strength was carried out at 7, 28 and 90 days to ensure sustainability of waste materials in concrete matrix at room temperature. After 90days, thermo-mechanical study was performed on the specimen for a temperature regime of $200^{\circ}-1000^{\circ}C$ followed by furnace cooling. Weight loss, visual inspection along with colour change, residual compressive strength and microstructure analysis were performed to investigate the effect of replacement of GBFS and FA. Although adding waste mineral by-products enhanced the weight loss, their pozzolanicity and formation history at high temperature played a significant role in retaining higher residual compressive strength even up to $800^{\circ}C$. On detail microstructural study, it has been found that addition of FA and GBFS in concrete mix improved the density of concrete by development of extra calcium silicate gel before fire and restricts the development of micro-cracks at high temperature as well. In general, the authors are in favour of combined replacement mix in view of high volume mineral by-products utilization as fire protection.