• 한국표면공학회:학술대회논문집
• /
• 한국표면공학회 2009년도 춘계학술대회 논문집
• /
• pp.111-112
• /
• 2009

Diamond-like carbon (DLC) is a convenient term to indicate the compositions of the various forms of amorphous carbon (a-C), tetrahedral amorphous carbon (ta-C), hydrogenated amorphous carbon and tetrahedral amorphous carbon (a-C:H and ta-C:H). The a-C film with disordered graphitic ordering, such as soot, chars, glassy carbon, and evaporated a-C, is shown in the lower left hand corner. If the fraction of sp3 bonding reaches a high degree, such an a-C is denoted as tetrahedral amorphous carbon (ta-C), in order to distinguish it from sp2 a-C [2]. Two hydrocarbon polymers, that is, polyethylene (CH2)n and polyacetylene (CH)n, define the limits of the triangle in the right hand corner beyond which interconnecting C-C networks do not form, and only strait-chain molecules are formed. The DLC films, i.e. a-C, ta-C, a-C:H and ta-C:H, have some extreme properties similar to diamond, such as hardness, elastic modulus and chemical inertness. These films are great advantages for many applications. One of the most important applications of the carbon-based films is the coating for magnetic hard disk recording. The second successful application is wear protective and antireflective films for IR windows. The third application is wear protection of bearings and sliding friction parts. The fourth is precision gages for the automotive industry. Recently, exciting ongoing study [1] tries to deposit a carbon-based protective film on engine parts (e.g. engine cylinders and pistons) taking into account not only low friction and wear, but also self lubricating properties. Reduction of the oil consumption is expected. Currently, for an additional application field, the carbon-based films are extensively studied as excellent candidates for biocompatible films on biomedical implants. The carbon-based films consist of carbon, hydrogen and nitrogen, which are biologically harmless as well as the main elements of human body. Some in vitro and limited in vivo studies on the biological effects of carbon-based films have been studied [$2{\sim}5$].The carbon-based films have great potentials in many fields. However, a few technological issues for carbon-based film are still needed to be studied to improve the applicability. Aisenberg and Chabot [3] firstly prepared an amorphous carbon film on substrates remained at room temperature using a beam of carbon ions produced using argon plasma. Spencer et al. [4] had subsequently developed this field. Many deposition techniques for DLC films have been developed to increase the fraction of sp3 bonding in the films. The a-C films have been prepared by a variety of deposition methods such as ion plating, DC or RF sputtering, RF or DC plasma enhanced chemical vapor deposition (PECVD), electron cyclotron resonance chemical vapor deposition (ECR-CVD), ion implantation, ablation, pulsed laser deposition and cathodic arc deposition, from a variety of carbon target or gaseous sources materials [5]. Sputtering is the most common deposition method for a-C film. Deposited films by these plasma methods, such as plasma enhanced chemical vapor deposition (PECVD) [6], are ranged into the interior of the triangle. Application fields of DLC films investigated from papers. Many papers purposed to apply for tribology due to the carbon-based films of low friction and wear resistance. Figure 1 shows the percentage of DLC research interest for application field. The biggest portion is tribology field. It is occupied 57%. Second, biomedical field hold 14%. Nowadays, biomedical field is took notice in many countries and significantly increased the research papers. DLC films actually applied to many industries in 2005 as shown figure 2. The most applied fields are mold and machinery industries. It took over 50%. The automobile industry is more and more increase application parts. In the near future, automobile industry is expected a big market for DLC coating. Figure 1 Research interests of carbon-based filmsFigure 2 Demand ratio of DLC coating for industry in 2005. In this presentation, I will introduce a trend of carbon-based coating research and applications.

• 동아시아식생활학회지
• /
• 제18권6호
• /
• pp.1022-1031
• /
• 2008

감귤 분말을 첨가한 파운드케이크의 특성을 분석하기 위하여 감귤 분말의 일반 성분과 품질 특성 결과는 다음과 같았다. 감귤 분말의 수분 함량은 13.72%, 조단백질 함량은 5.22%, 조지방 함량은 1.31%, 조회분 함량은 1.94%로 나타났다. 파운드케이크의 수분 함량은 대조군이 28.87%, 감귤 분말$5{\sim}20%$ 첨가구가 $28.75{\sim}29.62%$로, 수분 함량의 차이가 없었고, 대조구에 비하여 조단백질, 조지방 함량은 감소하였고, 조회분 함량은 증가하였으며, 조지방 함량에서만 유의적인 차이가 있었다(p<0.05). 감귤 분말을 첨가한 Amylograpm 호화 특성 중 호화 개시 온도는 감귤 분말 첨가량이 증가할수록 높게 나타났고, 최고 점도는 대조군이 686.00 B.U.로 가장 높았으며, 감귤 분말 20% 첨가구는 401.00 B.U.로 감귤분말 첨가량이 증가할수록 낮게 나타났다. Breakdown은 감귤분말 10% 첨가까지는 증가했으나 그 이상의 첨가량에서는 감소하였으며, setback 값은 감귤 분말 첨가량이 증가할수록 감소하는 특징을 나타내었다. 색도 측정 결과 감귤 분말 첨가량이 증가할수록 L값은 감소하였고 a값과 b값은 증가하였다. 조직감은 대조구에 비하여 감귤 분말 첨가량이 증가할수록 견고성은 높게 나타났고, 부착성과 응집성, 탄력성은 낮았으며 시료간에 유의한 차이가 있었다. 관능검사 결과, 색깔, 입안의 느낌, 부푼 정도 및 질감에 대한 기호도는 대조구에서 가장 높았고, 맛, 향미 및 전체적인 선호도에서는 감귤분말 10% 첨가구에서 가장 높게 나타났다. pH는 저장 기간이 경과할수록 모든 시료구에서 pH가 낮아졌으며, 대조구보다 감귤 분말 첨가구가 더 낮게 나타났다. 적정 산도는 10째부터 급격히 증가하였고 감귤 분말 첨가량이 많을수록 변화의 폭이 컸다. 저장 중 색도의 변화는 저장 기간이 경과함에 따라 모든 시료구에서 L값, a, 값, b값은 감소되었다. 저장 중 조직감은 견고성, 부착성, 점착성 및 씹힘성은 저장 기간이 길어질수록 증가하였고, 탄력성과 응집성은 감소하는 경향을 나타내었다.

• 한국식품저장유통학회지
• /
• 제11권2호
• /
• pp.182-188
• /
• 2004

찹쌀과 멥쌀 발아현미에 대한 영양성분과 품질특성을 조사하여 발아현미밥 및 가공제품 개발에 대한 기초자료로 제시하고자 본 실험을 수행하였다. 4$0^{\circ}C$에서 20시간 발아시킨 찹쌀 발아현미(수분함량 15.45%)와 멥쌀 발아현미(수분함량 15.02%)의 품질 특성 중 amylose 함량은 각각 4.9%, 17.9%, 환원당은 4.91%, 2.28%, 유리당은 찹쌀 발아현미가 glucose 0.42%, sucrose 0.15%, maltose 0.27%이고 멥쌀 발아현미가 glucose 0.59%, sucrose 0.50%, maltose 0.24%였다. 찹쌀과 멥쌀 발아현미의 색차 값은 각각 L값 60.30, a값 2.12, b값 23.52과 L값, 59.51, a값 3.15, b값 23.04이다. 호화도는 7.67%, 5.21%이고, 조직감중 hardness는 7.53 kg$_{f}$/$\textrm{cm}^2$, 8.93 kg$_{f}$/$\textrm{cm}^2$로 멥쌀 발아현미가 높았다. 비타민 E 함량은 찹쌀 271.8 $\mu\textrm{g}$/kg, 멥쌀 310.6 $\mu\textrm{g}$/kg이고, 총식이섬유 함량은 4.21%, 3.17%이다. 총 아미노산 함량은 현미는 126.8 mg/100 g, 발아현미는 90.8 mg/100 g, 시중에 판매되고 있는 발아현미밥은 106.5 mg/100 g이었다. 발아현미 제조 후 찹쌀, 멥쌀 모두 이취 성분은 거의 없었다. 찹쌀 발아현미의 아밀로그램 특성은 호화 초기온도가 42$^{\circ}C$였으며, peak viscosity는 498B.U., hot paste viscosity는 404 B.U., cool paste viscosity는 450 B.U., breakdown값은 94 B.U., setback값은 -48 B.U.이었으며, 멥쌀 발아현미의 특성은 호화 초기온도가 7$0^{\circ}C$였으며, peak viscosity는 212 B.U., hot paste viscosity는 212 B.U., cool paste viscosity는 334 B.U., breakdown값은 0 B.U., setback값은 123 B.U.이었다. 관능검사 결과에서는 색과 향의 강도가 낮은 찹쌀 발아현미가 높은 선호도 경향을 나타냈다.다.

• 생물환경조절학회지
• /
• 제17권4호
• /
• pp.336-341
• /
• 2008

국내에서 육성된 딸기 '매향' 등 6품종을 대상으로 유기재배 방법으로 촉성 및 반촉성 작형에서 재배하여 생육, 수량, 과실 품질 및 병해충 발생 양상 등을 조사하여 유기농 재배에 적합한 딸기 품종을 선발하고자 본 연구를 수행하였다. 2년에 걸친 시험 결과 두작형 모두에서 '설향'의 수확량이 타품종에 비하여 유의성있게 높았다. '설향'의 재배기간 전체 평균 당도는 $12.0^{\circ}Bx$로 타품종과 비교하여 낮은 경향이었으며 특히 고온기에 당도저하가 두드러졌다. 그러나 촉성 재배의 주요 출하시기인 2월 하순까지는 타품종과 비슷한 당도 변화를 보였다. '설향'의 경도는 평균 279g/${\phi}5mm$로서 기존 촉성재배 대비 품종인 '아키히메'보다 조금 높은 경향을 보였으며, 산도는 '매향'(0.69%)에서 가장 높았다. 촉성 재배시 '선홍'에서 생체중 및 근중이 타 품종에 비하여 유의하게 높았으며, 엽면적은 '설향'이 유의성있게 높았다. 반촉성재배시 품종간 생육 특성은 통계적으로 유의성이 없었다. 병해충 발생양상을 조사한 결과 '설향'의 잿빛곰팡이병 발병도가 높게 나타났다. 재배 및 육묘기 모두 '설향'이 흰가루병에 강한 저항성을 보였으며, 목화진딧물 발생량도 타품종과 비교하여 낮은 경향이었다. 점박이응애 발생량은 '레드펄'에서 낮은 밀도를 보였다. 전체적인 생육 및 병해충 발생양상을 조사한 결과 '설향'이 촉성 유기 재배에 가장 적합한 품종으로 판단되었으며 반촉성 재배시에는 고온기 '설향'의 경도 및 당도가 저하되어 적합하지 않을 것으로 판단된다.

• Journal of Biosystems Engineering
• /
• 제1권1호
• /
• pp.15-15
• /
• 1976

In analyzing the operational characteristics of a rice whitening machine, the internal radial pressure of the machine was measured using strain gage equipment. Changes in cylinder and feed screw configurations, screen type, cylinder speed and counter-pressure levels were examined to determine their impact on the quality and quantity of milled rice and the performance of the machine. The results are summarized as follows: 1. The internal radial pressure in the whitening chamber varied with the surface condition of the grain being processed. During the first or second pass through the machine, pressure was relatively low, reached a maximum after two to three passes with combinations I and II, three to six with combination III and then began to fall. 2. The pitch of the feed screw and the size of the feed gate opening which determine the rate of entry of grain into the whitening chamber, appeared to be the most important factor aff-::cting the degree of radial pressure, quality and quantity of milled rice and the efficiency of the machine. Using a feed screw with a wide pitch (4.8cm), radial pressure was relatively high and head rice recovery ratio \vere quite low. In this case capacity and machine effic?iency were much higher than obtained when using a feed screw with a narrow pitch (2.3cm). Very significant responses in radial pressure, head rice recovery rates and machine capacity were observed with changes in cylinder speed and counter-pressure levels when using the wide pitch feed screw. 3. The characteristics of the screen which surrounds the whitening chamber had an important effect on whitening efficiency. The existence of small protuberances on the original screen resulted in significant increases in both machine capacity and efficiency but without a significant decrease in head rice recovery or development of excessive radial pressure. Further work is required to determine the effects of screen surface conditions and the shape of the cylinderical steel roller on the rate of bran removal, machine efficiency and recovery rates. The size of the slotted perforations 0:1 the screen affects total milled rice recovery. The opening size on the original screen was fabricated to accommodate the round shape of Japonica rice varieties but was not suitable for the more slender Indica type. Milling Indica varieties with this screen resulted in a reduction in total milled rice recovery. 4. An increase in cylinder speed from 380 to 820 rpm produced a positive effect on head rice recovery for all machine combinations at every level of counter-pressure used in the tests. Head rice recovery was considerably lower at 380rpm using a wide screw pitch when compared to the results obtained at speeds from 600 to 820 r.p.m. The effects of cylinder speed On radial pressure, capacity and machine efficiency showed contrasting results, depending on the width of the feed screw pitch. With a narrow feed screw pitch (2.3cm), a direct proportional relationship was observed bet?ween cylinder speed and both radial pressure and machine efficiency. In contrast, using a 4.8 centimeter pitch feed roller produced a series of inverse relationships between the above variables. Based on the results of this study it is recommended when milling Indica type long grain rice varieties that the cylinder speed of the original machine be increased from 500-600 rmp up to a minimum of 800 rpm to obtain a greater abrasive effect between the grain and the screen. The pitch of the feed screw should be also reduced to decr?ease the level of internal radial pressure and to obtain higher machine efficiency and increased quality of milled rice with increased cylinder speeds. Further study on the interaction between cylinder speed and feed screw pitch is recommended. 5. An increase in the counter pressure level produced a negative effect On the head rice recovery with an increase in radial pressure, capacity, and machine efficiency over all combinations and at every level of cylinder speed. 6. Head rice recovery rates were conditioned primarily by the pressure inside the whitening chamber. According to the empirical cha racteristics curve developed in this study, the relationships of head rice recovery ($Y_h$) and machine capacity ($Y_c$/TEX>) to internal radial pressure ($X_p$) followed an inverse quadratic function and a linear function respectively: $$Y_h^\Delta=\frac{1}{{1.4383-0.2951X_p^\ast+0.1425X_p^{\ast\ast}}^2} , (R^2=0.98)$$$$Y_c^\Delta=-305.83+374.37X_p^{\ast\ast}, (R^2=0.88)$$The correlation between capacity and power consumption per unit of brown rice expressed in the following exponential function: $$Y_c^\Delta=1.63Y_c^{-0.7786^\{\ast\ast}, (R^2=0.94)$$These relationships indicate that when radial pressure increases above a certain range (1. 6 to 2.0 kg/$cm^2$ based On the results of the experiment) head ricerecovery decrea?ses in a quadratic relation with a inear increase in capacity but without any decrease in power consump tion per unit of brown rice. On the other hand, if radial pressure is below the range shown above, power consumption increases dramatically with a lin?ear decrease in capacity but without significant increases in head rice recovery. During the operation of a given whitening machine, the optimum radial pressure range or the correct capacity range should be selected by controlling the feed rate and/or counter-pressure keeping in mind the condition of the grain, particulary the hardness. It was observed that the total number of passes is related to radial pessure level, feed rate and counter-pressure level. The higher theradial pressure the fewer num?ber of pass required but with decreased head rice recovery. In particular, when using high feed rates, the total number of passes should be increased to more than three by reducing the counter-pressure level to avoid decreaseases in head rice recovery (less than 65 percent head rice recovery on the basis of brown rice) at every cylinder speed. 7. A rapid rise in grain temperature seemed to have a close relationship with the pressure generated inside the whitening chamber and, subsequently with head rice reco?very rates. The higher the rate of increase, the lower were the resulting head rice recoveries.

• Journal of Biosystems Engineering
• /
• 제1권1호
• /
• pp.17-48
• /
• 1976

In analyzing the operational characteristics of a rice whitening machine, the internal radial pressure of the machine was measured using strain gage equipment. Changes in cylinder and feed screw configurations, screen type, cylinder speed and counter-pressure levels were examined to determine their impact on the quality and quantity of milled rice and the performance of the machine. The results are summarized as follows: 1. The internal radial pressure in the whitening chamber varied with the surface condition of the grain being processed. During the first or second pass through the machine, pressure was relatively low, reached a maximum after two to three passes with combinations I and II, three to six with combination III and then began to fall. 2. The pitch of the feed screw and the size of the feed gate opening which determine the rate of entry of grain into the whitening chamber, appeared to be the most important factor aff-::cting the degree of radial pressure, quality and quantity of milled rice and the efficiency of the machine. Using a feed screw with a wide pitch (4.8cm), radial pressure was relatively high and head rice recovery ratio \vere quite low. In this case capacity and machine effic\ulcorneriency were much higher than obtained when using a feed screw with a narrow pitch (2.3cm). Very significant responses in radial pressure, head rice recovery rates and machine capacity were observed with changes in cylinder speed and counter-pressure levels when using the wide pitch feed screw. 3. The characteristics of the screen which surrounds the whitening chamber had an important effect on whitening efficiency. The existence of small protuberances on the original screen resulted in significant increases in both machine capacity and efficiency but without a significant decrease in head rice recovery or development of excessive radial pressure. Further work is required to determine the effects of screen surface conditions and the shape of the cylinderical steel roller on the rate of bran removal, machine efficiency and recovery rates. The size of the slotted perforations 0:1 the screen affects total milled rice recovery. The opening size on the original screen was fabricated to accommodate the round shape of Japonica rice varieties but was not suitable for the more slender Indica type. Milling Indica varieties with this screen resulted in a reduction in total milled rice recovery. 4. An increase in cylinder speed from 380 to 820 rpm produced a positive effect on head rice recovery for all machine combinations at every level of counter-pressure used in the tests. Head rice recovery was considerably lower at 380rpm using a wide screw pitch when compared to the results obtained at speeds from 600 to 820 r.p.m. The effects of cylinder speed On radial pressure, capacity and machine efficiency showed contrasting results, depending on the width of the feed screw pitch. With a narrow feed screw pitch (2.3cm), a direct proportional relationship was observed bet\ulcornerween cylinder speed and both radial pressure and machine efficiency. In contrast, using a 4.8 centimeter pitch feed roller produced a series of inverse relationships between the above variables. Based on the results of this study it is recommended when milling Indica type long grain rice varieties that the cylinder speed of the original machine be increased from 500-600 rmp up to a minimum of 800 rpm to obtain a greater abrasive effect between the grain and the screen. The pitch of the feed screw should be also reduced to decr\ulcornerease the level of internal radial pressure and to obtain higher machine efficiency and increased quality of milled rice with increased cylinder speeds. Further study on the interaction between cylinder speed and feed screw pitch is recommended. 5. An increase in the counter pressure level produced a negative effect On the head rice recovery with an increase in radial pressure, capacity, and machine efficiency over all combinations and at every level of cylinder speed. 6. Head rice recovery rates were conditioned primarily by the pressure inside the whitening chamber. According to the empirical cha racteristics curve developed in this study, the relationships of head rice recovery ($Y_h$) and machine capacity ($Y_c$/TEX>) to internal radial pressure ($X_p$) followed an inverse quadratic function and a linear function respectively: $$Y_h^\Delta=\frac{1}{{1.4383-0.2951X_p^\ast+0.1425X_p^{\ast\ast}}^2} , (R^2=0.98)$$ $$Y_c^\Delta=-305.83+374.37X_p^{\ast\ast}, (R^2=0.88)$$ The correlation between capacity and power consumption per unit of brown rice expressed in the following exponential function: $$Y_c^\Delta=1.63Y_c^{-0.7786^\{\ast\ast}, (R^2=0.94)$$ These relationships indicate that when radial pressure increases above a certain range (1. 6 to 2.0 kg/$cm^2$ based On the results of the experiment) head ricerecovery decrea\ulcornerses in a quadratic relation with a inear increase in capacity but without any decrease in power consump tion per unit of brown rice. On the other hand, if radial pressure is below the range shown above, power consumption increases dramatically with a lin\ulcornerear decrease in capacity but without significant increases in head rice recovery. During the operation of a given whitening machine, the optimum radial pressure range or the correct capacity range should be selected by controlling the feed rate and/or counter-pressure keeping in mind the condition of the grain, particulary the hardness. It was observed that the total number of passes is related to radial pessure level, feed rate and counter-pressure level. The higher theradial pressure the fewer num\ulcornerber of pass required but with decreased head rice recovery. In particular, when using high feed rates, the total number of passes should be increased to more than three by reducing the counter-pressure level to avoid decreaseases in head rice recovery (less than 65 percent head rice recovery on the basis of brown rice) at every cylinder speed. 7. A rapid rise in grain temperature seemed to have a close relationship with the pressure generated inside the whitening chamber and, subsequently with head rice reco\ulcornervery rates. The higher the rate of increase, the lower were the resulting head rice recoveries.