• 한국해양공학회지
• /
• 제24권2호
• /
• pp.57-61
• /
• 2010

At present, welding technology is not only emphasized in the development of manufacturing technology but its application is also expanding. In these systems, attempts have been made to use SUS as a high-temperature material for special applications, and in improvements in manufacturing technologies bear watching, together with an increase in the use rate. Specifically, three-dimensional wings are often used for fasteners with the purpose of decreasing the weight (정해용, 2007). However, due to developments in welding technology, there has been a recent tendency to replace existing assembly methods with welding. Specifically, if laser welding techniques are applied, the heat-affected zone can be minimized compared toother welding techniques. However, in the case of these special welding techniques, there is an increase in residual stress, which fatally affects the fatigue life. In order to remove the residual stress and its effect on fatigue life, shot-peening is executed. The intention of this study was to obtain the optimal conditions for shot-peening.

• 한국재료학회지
• /
• 제8권11호
• /
• pp.993-998
• /
• 1998

본 연구는 형상기억합금을 이용하여 제조한 신소재 중의 하나인 형상기억복합재료를 소개하고자 한다. 이 복합재료는 TiNi 섬유의 형상기억효과로 금속복합재료의 취약점이라 할 수 있는 기지와 섬유간의 열팽창차이로 인한 인장잔류응력을 제거하고 기지내에 압축잔류응력을 발생시켜 높은 인장강도를 갖는다. 따라서 본 연구에서는 용탕단조법으로 복합재료를 제조한 후 미세조직을 관찰하고 TiNi 섬유의 역변태온도 이상에서 피로실험을 수행하여 복합재료의 피로특성을 검토하였다. 이 결과 363K에서의 피로균열전파제어효과는 섬유체적률과 예변형에 의하여 증가된다.

• 대한한의학회지
• /
• 제23권2호
• /
• pp.139-150
• /
• 2002

OBJECTIVES : Schizandra chinensis is well known for its efficacy at liver function reinforcement, relieving thirst and recovery from fatigue. In this study, we examined the effects of sports drink containing Schizandra chinensis on serum metabolic substrate, electrolyte, stress indicators, related-enzyme and exercise performance, rectal temperature, and heat shock proteinb70 (HSP70). METHODS : Elite long-distance runners (male, 21.3yrs, n=16) were selected and divided into two groups; an experimental group (EXP, n=8) and a control group (CON, n=8). A beverage containing Schizandra chinensis was supplemented 3 times per day to EXP for 4 weeks. Serum biochemical elements (glucose, lactate, total cholesterol, triglyceride, high density lipoprotein cholesterol, glutamate oxaloacetate transaminase, glutamate pyruvate transaminase, creatinine, creatine phosphokinase, lactate dehydrogenase, blood urea nitrogen, Na, K, Cl) were analyzed by auto blood analyzer. Exercise performance was measured by treadmill exercise test, HSP70 was detected by electrophoresis and Western blotting, and rectal temperature was measured by rectal temperature probe. RESULTS : Administration of the beverage increased significantly the rest level of blood Na, Cl and glucose and decreased significantly lactate dehydrogenase, glutamate oxaloacetate transaminase. No difference was found in exercise performance, rectal temperature increment or HSP70 concentration between groups. CONCLUSIONS : Administration of a sports drink containing Schizandra chinensis altered blood glucose, lactate dehydrogenase, glutamate oxaloacetate transaminase, Na and Cl levels.

• Journal of Welding and Joining
• /
• 제16권2호
• /
• pp.111-121
• /
• 1998

It is well recognized that a excessive temperature gradient from the junction of head to skirt in axial direction in a hot pressure vessel can cause unpredicted high thermal stress at the junction and/or in axial direction of a skirt. this thermal stress resulting from axial thermal gradient may be a major cause of unsoundness of structural integrity. In case of cyclic operation of hot pressure vessels, the thermal stress becomes one of the primary design consideration because of the possibility of fracture as a result of cyclic thermal fatigue and progressively incremental plastic deformation. To perform thermal stress analysis of the junction and cylindrical skirt of a vessel, or, at least, to inspect quantitatively the magnitude and effect of thermal stress, the temperature profile of the vessel and skirt must be known. This paper demonstrated the temperature distribution and thermal stress analysis for the junction of skirt to head using F.E. analysis. Effect of air pocket in crotch space was quantitatively investigated to minimize the temperature gradient causing the thermal stress in axial direction. Effect of the skirt height on thermal stresses was also studied. Analysis results were compared with theoretical formulas to verify th applicability to the strength calculation in design field.

• 한국표면공학회지
• /
• 제32권2호
• /
• pp.144-156
• /
• 1999

Thermal Barrier Coating with Functional Gradient Materials (FGM-TBC) can play an important role to protect the parts from harmful environments in high temperatures such as oxidation, corrosion, and wear and to improve the efficiency of aircraft engine by lowering the surface temperature on turbine blade. FGM-TBC can increase the life spans of product and improve the operating properties. Therfore, in this study the evaluations of mechanical and thermal properties of FGM-TBC such as fatigue, oxidation and wear-resistance at high temperatures have been conducted. The samples of both the TBC with 2, 3, 5 layers (YSZ/NiCrAlY) to be produced by Air Plasma Spray method (APS) and the bulk TBC with 6 layers to be produced by Plasma Assisted Sintering method (PAS) were used. Furthermore, residual stress, bond strength, and thermal conductivity were evaluated. The average thickness of the APS was 500$\mu\textrm{m}$ to 600$\mu\textrm{m}$ and the average thickness of the PAS was 3mm. The hardness number of the top layer of APS was 750 Hv to 810Hv and that of PAS was 950 Hv to 1440Hv. The $ZrO_2$ coating layer of APS was composed of tetragonal structure after spraying as the result of XRD analysis. As shown in the results of the high temperature wear test, the 3 layer coating of APS had the best wear resistance at $800^{\circ}C$ and the 5 layer coating of APS had the best wear resistance at $600^{\circ}C$. But, these coatings had the tendency of the low-temperature softening at $300^{\circ}C$. The main mechanism of wear was the adhesive wear and the friction coefficient of coatings was increased as increasing the test temperatures. A s results of thermal conductivity test, the ${\Delta}T$ of the APS coating was increased as number of layer and the range of thermal conductivity of the PAS was $800^{\circ}C$ to $1000^{\circ}C$.

• 한국건설순환자원학회논문집
• /
• 제9권4호
• /
• pp.633-641
• /
• 2021

본 연구에서는 철강산업 부산물인 제강슬래그 및 폐아스팔트 콘크리트포장 파쇄물인 순환골재를 사용하여 아스팔트 혼합물용 천연골재를 대체 가능성을 파악하고 제강슬래그를 활용한 아스팔트 혼합물의 공용성 평가를 수행하였다. 일반 WC-2와 Slag WC-2(R)에 대한 평가는 동일한 조건으로 수행하였으며, 수행기관은 국가 공인시험기관(KTR) 및 한국도로학회로 각 기관의 연구용역을 통해 평가되었다. 동적안정도, 동탄성계수, 피로균열 시험결과 슬래그 아스팔트 혼합물이 일반 아스팔트 혼합물에 비해 각각 140%, 저온·고온 487·350%, Low·Middle·High Stress Level 32·325·900% 증가하는 것으로 조사되었다. 함부르크 휠 트래킹 시험결과 두 가지 혼합물의 수분저항성이 우수한 것으로 조사되었으나, 슬래그 아스팔트 혼합물 시험결과에 변곡점이 없고 변위발생량이 낮아 일반 혼합물 대비 우수한 것으로 조사되었다. 장기공용성 평가(APT) 결과 슬래그 아스팔트 혼합물에서 소성변형 발생량이 6.5% 적게 발생하였으며, 표층, 기층 및 하부층의 압축량을 분석한 결과 슬래그 포장도로의 표층 소성변형 저항성이 45% 높게 조사되었다.

• 마이크로전자및패키징학회지
• /
• 제16권3호
• /
• pp.25-29
• /
• 2009

COB(chip-on-board) 플립칩 패키지에 있어서 NCP(non-conductive paste)의 적용성을 확보하기 위해 자체 포뮬레이션한 NCP와 상용 NCP에 대하여 보드레벨 플립칩 패키지를 제작하고 고온고습 및 열충격 신뢰성을 평가하였다. 실험결과 보다 작은 입도의 용융 실리카를 첨가한 NCP 시제품들이 고온고습 신뢰성에 유리한 것을 알 수 있었다. 또한, NCP 접속부에 있어서 열응력에 의한 피로보다 흡습에 의한 에폭시의 팽창이 접속부 파손에 보다큰 영향을 미치는 것으로 나타났으며, NCP의 접착강도가 높을수록 NCP 플립칩 패키지의 열충격 신뢰성이 향상되는 것을 알 수 있었다.

• Tribology and Lubricants
• /
• 제19권4호
• /
• pp.223-229
• /
• 2003

The sliding wear characteristics of the crane sheave were investigated using a pin-on-disk rig tester. The experiment was conducted using a high carbon steel wire that was upper material, also carbon steel castings that was disk material. There are various operating conditions in this work. At the room temperature, we carried out the wear test under a grease lubrication and dry condition. The results of wear test showed that an annealed-casted have lower, also the wear curves are linearly increased with increasing of sliding distance. For the specific wear rate of annealed-casted, the wear resistance was increased with decreasing diameter of wire. The wear of a wire and a disk have a different mechanism, the one is the abrasive wear due to fatigue wear under lubrication, another is the adhesion wear under dry condition.

• Carbon letters
• /
• 제9권3호
• /
• pp.218-231
• /
• 2008

Carbon fibers are a new breed of high-strength materials which have been described as a fiber containing at least 90% carbon obtained by the controlled pyrolysis of appropriate fibers. Carbon fiber composites are ideally suited to applications where strength, stiffness, lower weight, and outstanding fatigue characteristics are critical requirements. They also can be used in the occasion where high temperature, chemical inertness and high damping are important. In recent decades, carbon fibers have found wide applications in commercial and civilian aircraft, recreational, industrial, and transportation markets. Therefore, understanding the basic structure, synthesis and physicochemical properties of carbon fibers is very important to apply them as a precursor of above applications. This review paper discuss the general information and manufacture technique of carbon fibers used for improving the performance of composite materials in various industries for the present.

• 한국세라믹학회지
• /
• 제37권5호
• /
• pp.418-424
• /
• 2000

Effects of Ar ion damage prior to the phase transformation from pyrochlore to perovskite structure of PZT thin films have been investigated. As the degree of damage increased by increasing the acceleration voltage in the ion mass doping system, the phase transformation temperature decreased such that the temperature could be lowered down to 550$^{\circ}C$ when the film was damaged at 15 kV for 5 minutes. When the film was damaged prior to the heat treatment grain size of the perovskite thin films became less than 300${\AA}$. It turned out that relatively high value of the remanent polarization (about 30${\mu}$C/$\textrm{cm}^2$) as well as improvement of the fatigue characteristics to a large extent is closely related to the fine grain size of thus obtained PZT films.