• 전자공학회논문지A
• /
• 제29A권10호
• /
• pp.17-23
• /
• 1992

A ($Pb_{1-x}Ca_{x})ZrO_{3}$ system which has a high dielectric constant, low dielectric loss and temperature coefficient was investigated. For sintering temperatures above 1350$^{\circ}C$ the microstructures of sintered bodies were unchanged regardless of the amount of CaO. The dielectric constant and dielectric loss decreased and the temperature coefficient varied from positive to negative with the increasing amount of CaO. For the CaO content of 0.37, i.e. ($Pb_{0.63}Ca_{0.37})ZrO_{3}$, the ceramic showed very good dielectric properties such as ${\varepsilon}_1$=100, Q > 1200 at 3GHz, and T$_f$=$\pm$3ppm/$^{\circ}C$.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2004년도 하계학술대회 논문집 Vol.5 No.2
• /
• pp.738-743
• /
• 2004

The microwave dielectric properties and their related structural characteristics in solid solutions of (1-x) $Ba(Mg_{1/3}Nb_{2/3})O_3$ -x $La(Mg_{2/3}Nb_{1/3})O_3$ (BLMN) have been investigated by measuring the dielectric constant${\varepsilon}r)$, Q value and temperature coefficient of resonant frequency$({\tau}f)$ and by observing the crystal structure using high resolution transmission electron microscopy (HRTEM). Microwave dielectric properties showed characteristic features for specific composition. Dielectric constant$({\varepsilon}r)$ showed maximum value at the composition which corresponds to the phase boundary between 1:2 ordered and 1:1 ordered structure. The increase in ${\varepsilon}_r$ may be caused by the rattling of ions by incorporating smaller ions and the disordered structure. The variation of temperature coefficient of resonant frequency${{\tau}_f)$ was investigated in terms of oxygen octahedra tilting.

• 한국세라믹학회지
• /
• 제45권11호
• /
• pp.713-718
• /
• 2008

PSZT are selected and SHS are applied to each system. The sintering properties of PSZT powders showed $7.754g/cm^3$ of sintered density and $4{\mu}m$ of grain size at sintering temperature of $1250^{\circ}C$. Curie temperature lowered gradually from $363.6^{\circ}C\;to\;319.2^{\circ}C$ and relative dielectric constants increased rapidly by a quantity of Sr. This remarkable contrast in dielectric properties with powder preparation methods, in this study, was not due to grain size and sintered density but rather a crystallinity and sinterability of synthesized powders, extra-supplied Pb during reaction, mol fraction of rhombohedral phase and purity of starting materials.

• E2M - 전기 전자와 첨단 소재
• /
• 제8권5호
• /
• pp.587-593
• /
• 1995

Silicone oils used insulating substances exhibit the both of organic and inorganic properties, and it has many superior characteristics such as the high thermal resistance and low thermal oxidation level when compared to other insulation oils. In order to investigate the dielectric loss due to the increase of viscosity, silicone oils of viscosity 1, 2, 5[cSt] had been chosen as the specimen and experiment has been performed in the temperature range of -70[.deg. C] - 65[.deg. C] and frequency range of 30 - 1*10$\^$5/[Hz]. As a result, the linear decrease of loss at low frequency region in high temperature was due to the influence of applying frequency, whereas the increase of loss at high frequency region was contributed by electrode's resistance. And increasing viscosity, the activation energy increased from 3.77[kcal/mole] to 7.21[kcal/mole]. The dipole moment of specimen was become clear 1.48 - 2.26[debyel in high temperature region(5 - 65[.deg. C]) and 1.05 - 1.80[debye] in low temperature region (-70 - -25[.deg. C])respectively.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2005년도 제36회 하계학술대회 논문집 C
• /
• pp.2013-2015
• /
• 2005

In this paper, Effect of $BaSrTiO_3/Li_2CO_3$ on low temperature sintering and dielectric property of thick films has been investigated for variable capacitor on high frequency. The thick films were fabricated by the tape casting and then the structural and dielectric properties as a function of an addition composition ratio and sintering temperature were studied. For the thick film sintered at $1050^{\circ}C$, it was densified to 96% of $BaSrTiO_3$ theoretical density by the addition of 10 $wt{\cdot}%$ $BaSrTiO_3/Li_2CO_3$. Dielectric constant increased and Curie temperature lowered with the increased of $BaSrTiO_3/Li_2CO_3$ content, which probably can be explained by the substitution of $Ba^{3+},Li^{1+}$ on $RaTiO_3$ lattice. The tunability and dielectric loss of the $BaSrTiO_3/Li_2CO_3$ thick film, sintered at $1350^{\circ}C$, were about 26% and 0.234 at $10{\sim}15MHz$, respectively.

• 한국안전학회지
• /
• 제6권4호
• /
• pp.5-12
• /
• 1991

The dielectric properties of natural rubbers for electric safety are very important to investigate the molecular structure. The electric safety characteristics of the dielectric absorption in aging vulcanized natural rubber were studied in the range of frequency from 1$\times$10$^3$［Hz］to 3.2$\times$10$^3$［Hz］l at the temperature of 23［$^{\circ}C$］. As the results, it has been confirmed that in the case of aging natural rubber of above 2 phr the specimens exhibit two kinds of dielectric losses due to the dipole polarization by impurities and sulfurs, and of raw rubber exhibit the kind of losses due to the dipole polarization. Rurthermore, dielectric loss maximum tansspectrum in high freguency region for electric safety, which removed to the low freguency according to increasing sulfur, depends greatly on sulfur.

• 전자공학회논문지A
• /
• 제32A권12호
• /
• pp.101-107
• /
• 1995

To improve the leakage current, we developed two step sputtering method where PZT thin film in first deposited at room temperature followed by 600.deg. C deposition. The method used an amorphous PZT layer deposited at room temperature to keep a stable interface during sputtering at high temperature. PZT thin films were deposited on Pt/Ti/SiO$_{2}$/Si substrate at room temperature and 600.deg. C sequentially. The effect of the layer deposited at room temperature was investigated with regard to I-V characteristics and P-E hysteresis loop. In the case of the sample with the layer deposited at room temperature, both leakage current and dielectric constant were decreased. The thicker the layer deposited at room temperature was, the lower dielectric constant was. However, leakage current was indepenent of the variation of the thickness ratio. The sample with 200$\AA$ of the layer deposited at room temperature showed the most promising results in both dielectric constant and leakage current.

• Journal of Electrical Engineering and information Science
• /
• 제3권1호
• /
• pp.68-72
• /
• 1998

The photomachinable glass-ceramics of Ag and CeO2 doped Li203-SiO2 (LAS)glass system was investigated as a function of UV irradiation time. After the expose and the non-exposed samples were heated, they went under crystalline phase with DTA, SEM, TEM and XRD of normal/high temperature. In this work, crystalline phases, microstructure and dielectric properties were studied under the various time of UV irradiation and heat treatment.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2006년도 제37회 하계학술대회 논문집 C
• /
• pp.1392-1393
• /
• 2006

In this paper dielectric and piezoelectric properties were measured for 2 phase - dispersed composite system consisting of ferroelectric ceramic PZT particles and polymer PVC. The results were analyzed and the validity of composite theories for experimental results were discussed. And also in high temperature where ionic conductivity is dominated, linear and nonlinear permittivites were measured and discussed.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2002년도 추계학술대회 논문집 Vol.15
• /
• pp.228-231
• /
• 2002

In this paper, we estimated the insulation properties of cross-linked polyethylene (XLPE) for ultra-high voltage cable. we have studied the dielectric characteristics of XLPE due to frequency and temperature variation. The dielectric characteristics were measured in the temperature range from $25[^{\circ}C]$ to $120[{^{\circ}C]}$. Also we measured in the voltage range of 1[V] to 20[V] according to the step voltage application method. From FT-IR spectrum as an analysis of physical properties, a strong absorption in wavenumbers 700 to $730[cm^{-1}]$, $1456[cm^{-1}]$ and 2700 to $3000[cm^{-1}]$ observed by the methyl groups$(CH_{2})$. From the analysis of DSC, the crystalline melting points of the specimen observed in the temperature $60[^{\circ}C]$ and $106.58[^{\circ}C]$.