• Journal of the Institute of Convergence Signal Processing
• /
• v.8 no.2
• /
• pp.98-105
• /
• 2007

In this paper, we propose the method and system which determines the condition for safe and unsafe lane changing. To determine the condition, first, the system sets up the Region of Interest(ROI) on the neighboring lane. Second, a dangerous vehicle is extracted during the line changing. Third, the condition is determined to wm or not by calculating the moving direction, relative distance md relative velocity. To set up the ROI, the only one side lane is detected and the interested region is expanded. Using the coordinate transformation method, the accuracy of the ROI raised. To correctly extract the vehicle on the neighboring lane, the Adaptive Background Update method and Image Segmentation method which uses the feature of the travelling road are used. The object which is extracted by the dangerous vehicle is calculated the relative distance, the relative velocity and the moving average. And then in order to ring, the direction of the vehicle and the condition for safe and unsafe is determined. As minimizes the interested region and uses the feature of the travelling road, the computational quantity is reduced and the accuracy is raised and a stable result on a travelling road images which demands a high speed calculation is showed.

• Journal of the Institute of Convergence Signal Processing
• /
• v.17 no.1
• /
• pp.1-9
• /
• 2016

In this paper, for the improvement of quality of service(QoS) performance of heterogeneous networks, multi-cell scheduling is proposed. In order to implement the proposed algorithm, for the recognition of the impact on the throughput performance of users, macro-pico-cells that form distributed architecture were proposed. In operating heterogeneous networks, considering the centralized structure, a macro-RRH(Remote Radio Head) deployment scenario was proposed. For interference mitigation of the proposed system, by applying the optional sub-frame, through CQI(Channel Quality Indicator) measurement for each sub-frame period, constraint conditions were measured according to system situations. For the simplification, the pattern of the same ABS muting was assumed. In the above two multi-cell environments, the algorithm of high-speed load balancing maintenance was proposed.

• Journal of the Institute of Convergence Signal Processing
• /
• v.5 no.4
• /
• pp.333-337
• /
• 2004

This paper describe a design of 5GHz OFDM baseband chip for IEEE 802.11a wireless LAN. The proposed device is consists of transmitter and receiver within a single FPGA chip. We applied single tap equalizer that use Normalized LMS algorithm to remove ISI that happen at high speed data transmission. And also, we used carrier wave frequency offset algorithm that use training symbol to remove ICI. The simulation results show the correct transmission without errors the between transmitter and receiver And we can remarkably reduce the number of register through the synthesized circuits by using DSP block and EMB(Embedded Memory Block). The target device for implementation of the synthesized circuits is Altera Stratix EPIS25FC672 FPGA and design platform is VHDL.

• Journal of the Institute of Convergence Signal Processing
• /
• v.5 no.4
• /
• pp.281-286
• /
• 2004

The wear process of end mill is a so complicated process that a more reliable technique is required for the monitoring and controling the tool life and its performance. This research presents a new tool wear monitoring method based on the sound signal generated on the machining. The experiment carried out continuous-side-milling for using the high-speed steel end mill under wet condition. The sound pressure was measured at 0.5m from the cutting zone by a dynamic microphone, and was analyzed at frequency domain. The tooth passing frequency appears as a harmonics form, and end mill wear is related with the first harmonic. It can be concluded from the result that the tool wear is correlate with the intensity of the measured sound at tooth passing frequency estimation of end mill wear using sound is possible through frequency analysis at tooth passing frequency under the given circumstances.

• Journal of the Institute of Convergence Signal Processing
• /
• v.10 no.3
• /
• pp.193-197
• /
• 2009

In this paper, we study on design of vehicle control system which is based on ${\mu}C/OS-II$, We component a electric motor drive system for simulator because the most of vehicle part use electric motor for actuator. We use the XC2287 microcontroller which is often used vehicle body controller because XC2287 guarantee high confidence and durability in vehicle industry. The electric motor control system derive PWM from general I/O port in XC2287 microcontroller. The signal is supplied at electric motor after amplifying that using driver circuit. The user control duty of PWM signal through controlling potentiometer which is connected to XC2287. through that, the user control speed of electric motor. we synchronize both input process via controlling potentiometer and PWM output process using semaphore. we verify porting of ${\mu}C/OS-II$ via experimentation.

• Journal of Convergence Society for SMB
• /
• v.1 no.1
• /
• pp.39-44
• /
• 2011

Recently, due to people's incontinent use all over the world, fossil fuels such as coal, oil, and natural gas were nearly to be exhausted and also causes serious environment pollutions. Therefore, there is a strong need to develop solar, wind, hydro, biomass, geothermal to replace fossil fuels to prevent suffering from above problems. Wish advances in sensor technology, such data is collected as a kind of stream data which arrives in an online manner so that it is characterized as high- speed, real-time and unbounded and it requires fast data processing to get the up-to-date results. Therefore, the traditional data processing techniques are not fit to deal with stream data. In this paper, we propose a kalman filter-based algorithm to process renewable stream data.

• Journal of Convergence for Information Technology
• /
• v.10 no.11
• /
• pp.16-22
• /
• 2020

Since it is difficult for individual power producers and non-professionals who lack basic knowledge to control, manage, and operate facilities through EMS (Energy Management System), augmented reality and virtual reality monitoring systems are applied. However, in the existing systems, data access efficiency is inferior due to the process of analyzing column values for analog signal values collected from sensors and converting data after combining the columns. In addition, high-speed operation processing is difficult due to a large number of indexes for accommodating access patterns for various analog signal waveforms. Therefore, in this paper, a bitmap generator is inserted into a non-tree structure to convert the data collected from power facilities into physical property information, and the converted information is encrypted with a common key, so that the resources for the resources shared between each device are We propose a method of exchanging data for an augmented reality-based power system that is controlled by measurement.

• The Journal of the Institute of Internet, Broadcasting and Communication
• /
• v.17 no.2
• /
• pp.113-118
• /
• 2017

This paper propose the NM-MMA (Novel Mixed-MMA) that is possible to improving the convergence speed of current MMA algorithm and reducing the high MSE of SE-MMA algorithm, and its equalization performance were analyzed. The cost function of the NM-MMA configured as the sum of appropriate weights of gradient vector of current MMA and SE-MMA, and then it used for the updating the tap coefficient of equalizer. The computer simulation was performed applying the same environment in the channel, step size and signal to noise ratio, and the same performance index in equalizer output signal constellation, residual isi, MSE, SER was used. As a result of computer simulation, the proposed NM-MMA has fast convergence time than MMA, and less in MSE and SER performance compared to SE-MMA.

• Convergence Security Journal
• /
• v.5 no.4
• /
• pp.27-32
• /
• 2005

Recently The social interest regarding is coming to be high about Home Network accordong to intelligence anger of diffusions and the family home appliance machineries and tools of the superhigh speed Internet In the ubiquitous computing socioty, only neither the threat of the private life which is caused by in cyber attack will be able to increase according to the computer environment dependence degree of the individual increases in the ubiquitous computing socioty, only neither the threat of the private life which is caused by in cyber attack will be able to increase according to the computer environment dependence degree of the individual increases Beacaues of Home network is starting point to go ubiquitous computing enviorment, The Increase of Cyber attack through Internet will raise its head with the obstacle to disrupt the activation of the groove network. So there is a possibility of saying that the counter-measure preparation is urgent, In the various environment like this, It means the threat which present time than is complicated will exist. So it will analyze the Home network system environment of present time and observe the Security threat and attack type in the ubiquitous computing enviorment. So it will analyze the Home network system environment of present time and observe the Security threat and attack type in the ubiquitous computing enviorment.

• Journal of Convergence for Information Technology
• /
• v.10 no.1
• /
• pp.22-27
• /
• 2020

With the deployment of 5G infrastructure, content delivery network (CDN) will be a key role to provide explosive growing services for the independent media and YouTube which contain high-speed mobile contents. Without a local cache, the mobile backhaul and fronthaul should endure huge burden of bandwidth request for users as the increase number of direct accesses from contents providers. To deal with this issue, this paper fist presents both fronthaul solutions for CDN that use dark fibers and a passive optical network (PON). On top of that, we propose the aggregated content request specialized for PON caching and evaluate and compare its performance to legacy schemes through the simulation. The proposed PON caching scheme can reduce average access time of up to 0.5 seconds, 1/n received request packets, and save 60% of backhaul bandwidth compared to the no caching scheme. This work can be a useful reference for service providers and will be extended to further improve the hit ratio of cache in the future.