• 조명전기설비학회논문지
• /
• 제24권5호
• /
• pp.114-121
• /
• 2010

본 논문에서는 대지저항률과 매설지선의 길이 그리고 접지전류의 인가점에 따른 매설지선 접지임피던스의 주파수 의존성에 대하여 살펴보았다. 단일 구조와 2층 구조의 대지에 설치된 매설지선의 접지임피던스를 1[kHz]에서 10[MHz]의 주파수 범위에서 측정하고 분석하였다. 그 결과, 접지임피던스의 주파수 의존성은 대지저항률에 크게 영향을 받는 것으로 나타났으며, 그리고 높은 대지저항률의 대지에 설치된 매설지선의 접지임피던스는 수십 [kHz] 이하의 주파수에서 용량성 특성을 나타내었다. 높은 대지저항률을 갖는 대지에 설치된 매설지선의 끝단에 접지전류를 인가한 경우 접지임피던스는 높은 주파수 영역에서 증가하였다.

• International Journal of Concrete Structures and Materials
• /
• 제9권1호
• /
• pp.119-132
• /
• 2015

Electrical resistivity is an important physical property of portland cement concrete which is directly related to chloride induced corrosion process. This study examined the electrical surface resistivity (SR) and bulk electrical resistivity (BR) of concrete cylinders for various binary and ternary based high-performance concrete (HPC) mixtures from 7 to 161 days. Two different types of instruments were utilized for this investigation and they were 4 point Wenner probe meter for SR and Merlin conductivity tester for bulk resistivity measurements. Chronological development of electrical resistivity as well as correlation between two types of resistivity on several days was established for all concrete mixtures. The ratio of experimental surface resistance to bulk resistance and corresponding resistivity was computed and compared with theoretical values. Results depicted that bulk and SR are well correlated for different groups of HPC mixtures and these mixtures have attained higher range of electrical resistivity for both types of measurements. In addition, this study presents distribution of surface and bulk resistivity in different permeability classes as proposed by Florida Department of Transportation (FDOT) specification from 7 to 161 days. Furthermore, electrical resistivity data for several HPC mixtures and testing procedure provide multiple promising options for long lasting bridge decks against chloride induced corrosion due to its ease of implementation, repeatability, non-destructive nature, and low cost.

• 대한전자공학회논문지TC
• /
• 제39권11호
• /
• pp.40-46
• /
• 2002

본 논문에서는 CPW MMIC 실장시 발생되는 기생 공진 현상을 제거하기 위한 새로운 구조의 실리콘 MEMS 패키지를 제안하였다. 또한 세 가지 형태의 실리콘 칩 캐리어(gold-plated high resistivity, lightly doped, high resistivity) 상에 GaAs CPW 패턴을 제작하고 해석/측정함으로써, 제안된 패키지의 성능을 확인하였다. 해석 및 측정 결과 제안된 MEMS 패키지는 비저항이(resistivity) 15 ${\Omega}{\cdot}$㎝인 실리콘 캐리어(carrier)를 사용함으로써 기생 공진 현상을 효과적으로 억제시킬 수 있었다.

• 자원환경지질
• /
• 제32권2호
• /
• pp.161-167
• /
• 1999

Electric and electromagnetic surveys were conducted to investigate the deep structure of the Ulsan fault in Ipsil area, south of Kyeongju. On this study, especially high-frequency magnetotelluric method of electromagnetic survey in the frequency range of 10~100,000 Hz was mainly employed to study the deep subsurface configuration. High-frequency MT survey was performed at 70 points of spacing 30~50 m, making 3.8 km survey line. As a survey result, a 2-km-depth 2-D cross-section was achieved. It shows vertical and horizontal subsurface variations of resistivity values. Near-surface layer having low resistivity value becomes thicker eastward up to 800m. There is a steep low resistivity zone in the west side of survey line, and there exists two low resistivity zones dipping west in the east side of survey line. Two low resistivity zones are interpreted to be related to major movement pattern of the Ulsan fault. This suggests that major fault lines are developed on both peripheral sides of the broad fault zone.

• 열처리공학회지
• /
• 제24권1호
• /
• pp.16-22
• /
• 2011

Al-Co/AlN-Co multilayer films with different layer thicknesses were prepared by using a two-facing target type D.C sputtering (TFTS) system. The deposited films were annealed isothermally at different temperatures and their microstructure, magnetic properties and resistivity were investigated. The magnetization of as-deposited films is very small irrespective of layer thickness. It was found that annealing conditions and layer thickness ratio (LTR) of Al-Co to AlN-Co can control the microstructure as well as the physical properties of the prepared films. The resistivity and magnetization increase and the coercivity decreases with decreasing LTR. High resistivity and sufficient magnetization were obtained for the films with LTR = 0.35. Films having such considerable magnetization and resistivity will be a potential candidate to be used for a high density recording material.

• 한국지구과학회지
• /
• 제36권1호
• /
• pp.59-67
• /
• 2015

전기비저항탐사는 제방 등의 수리시설물 안전 관리를 위해 널리 사용되는 방법이다. 본 연구에서는 서해안에 위치한 제방에서 해수측 조석 변화가 전기비저항 모니터링 자료의 해석에 어떤 영향을 미치는지 분석하고자 하였다. 이러한 연구를 위해 조석 변화가 많이 발생하는 제방에서 3일 동안 3시간 간격으로 전기비저항 변화를 모니터링 하였다. 전기비저항 모니터링 자료는 시간에 따라 특정 구간에서 비저항 분포 변화를 나타냈으며, 이러한 결과는 조석 변화와 상관성이 있는 것으로 파악하였다. 따라서 조석 변화가 큰 제방에서의 전기비저항 탐사는 이에 따른 고려를 필히 해줘야 한다. 향후 연구를 위해 보다 장기간에 걸친 전기비저항 모니터링 및 조석 변화의 분석이 필요할 것으로 사료된다.

• 조명전기설비학회논문지
• /
• 제17권5호
• /
• pp.103-110
• /
• 2003

대지 저항률이 높은 암반, 사력층 지역에서의 접지 저항은 일반적인 봉형 접지 전극으로는 얻기가 거의 불가능 하며 원하는 저항값을 얻기 위해서는 깊이 매설한 접지 전극과 접지 저항 저감제를 충분하게 사용하는 코어링 접지 방식을 채택하여 시설하는 것이 적절하다고 판단된다. 본 연구는 둥가반경 개념을 이용하여 코어링 접지 전극의 반 경이 확장되는 것을 보였으며 이릎 토대로 낮은 접지 저항이 얻어지고, 제주지역과 같이 고저항 지대에서의 각 토 양의 대지 저항률을 추정함으로써 다른 고저항 지대에서의 접지공사시 개략적인 접지저항을 예측하여 기초 자료로 사용할 수 있도록 하였다.

• Journal of Mechanical Science and Technology
• /
• 제15권5호
• /
• pp.630-638
• /
• 2001

The electrical resistivity of sinter dusts generated from the steel industry and coal fly ash from the coal power plant has been investigated using the high voltage conductivity cell based on JIS B 9915 as a function of temperature and water content. Dust characterization such as the chemical composition, size distribution, atomic concentration, and surface structure has been conducted. Major constituents of sinter dusts were Fe$_2$O$_3$(40∼74.5%), CaO (6.4∼8.2%), SiO$_2$(4.1∼6.0%), and unburned carbon (7.0∼14.7%), while the coal fly ash consisted of mainly SiO$_2$(51.4%), Al$_2$O$_3$(24.1%), and Fe$_2$O$_3$(10.5%). Size distributions of the sinter dusts were bi-modal in shape and the mass median diameters (MMD) were in the range of 24.7∼137㎛, whereas the coal fly ash also displayed bi-modal distribution and the MMD of the coal fly ash was 35.71㎛. Factors affecting resistivity of dusts were chemical composition, moisture content, particle size, gas temperature, and surface structure of dust. The resistivity of sinter dusts was so high as 10(sup)15 ohm$.$cm at 150$\^{C}$ that sinter dust would not precipitate well. The resistivity of the coal fly ash was measured 1012 ohm$.$cm at about 150$\^{C}$. Increased water contents of the ambient air lowered the dust resistivity because current conduction was more activated for absorption of water vapor on the surface layer of the dust.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 1995년도 하계학술대회 논문집 A
• /
• pp.104-106
• /
• 1995

A curious resistivity anomaly in high curie point barium-lead-titanate materials with positive temerature coefficient of resistivity (PTCR) has been observed just below the curie point, besides the normal PTCR anomaly. The additional resistivity anomaly was observed in the resistivity-temperature characteristics.

• Advances in concrete construction
• /
• 제2권3호
• /
• pp.163-176
• /
• 2014

Essentially, when electrical current flows easily in concrete that has large pores filled with highly connective pore water, this is an indication of a low resistivity concrete. In concrete, the flow of current between anodic and cathodic sites on a steel reinforcing bar surface is regulated by the concrete electrical resistance. Therefore, deterioration of any existing reinforced concrete structure due to corrosion of reinforcement steel bar is governed, to some extent, by resistivity of concrete. Resistivity of concrete can be improved by using SCMs and thus increases the concrete electrical resistance and the ability of concrete to resist chloride ingress and/or oxygen penetration resulting in prolonging the onset of corrosion. After depassivation it may slow down the corrosion rate of the steel bar. This indicates the need for further study of the effect of electric arc furnace dust (EAFD) addition on the concrete resistivity. In this study, concrete specimens rather than mortars were cast with different additions of EAFD to verify the electrochemical results obtained and to try to understand the role of EAFD addition in influencing the corrosion behaviour of reinforcing steel bar embedded in concrete and its relation to the resistivity of concrete. The results of these investigations indicated that the corrosion resistance of steel bars embedded in concrete containing EAFD was improved, which may link to the high resistivity found in EAFD-concrete. In this paper, potential measurements, corrosion rates, gravimetric corrosion weight results and resistivity measurements will be presented and their relationships will also be discussed in details.