• JOURNAL OF ELECTRICAL WORLD
• /
• no.7 s.127
• /
• pp.32-35
• /
• 1987

• The Transactions of the Korean Institute of Electrical Engineers B
• /
• v.48 no.1
• /
• pp.42-47
• /
• 1999

This paper presents the information transmission between on-board and ground-site in MAGLEV. considering safety and high speed operation and density operation, information transmission between them is necessary. Therefore it is necessary for transmission system to ensure high speed transmission, low error rate, massive information, and reliability of information. To provide above conditions, 1.1km signal line assembly was constructed and Frequency Shift Keying(FSK) modulation and Open System Interconnection(OSI) based high-level data link control(HDLC) protocol are applied. To modulate digital signal for transmission from ground-site to on-board, carrier frequency of 70kHz is used and 90khz is used for transmission from on-board to ground-site. Transmission speed is 2400bps for consideration of train speed, quantity of information, and data error rate. And this paper introduces information monitoring considering user interface and presents the method for an effective data transmission in MAGLEV which is now being tested and intends to provide for an intelligent train operation system in future.

• 제어로봇시스템학회:학술대회논문집
• /
• 1988.10a
• /
• pp.683-687
• /
• 1988

Digitalization of processor and increase of control information need the fiber optic data network which has excellent noise immunity and high-quality, widebaudwidth information transfer capability. It is aimed to offer a fiber optic dataway system for measuring and control the power plant, that has high reliability, high data transmission rate and small cable duct with large transmission capacity.

• Proceedings of the KIEE Conference
• /
• 1999.07a
• /
• pp.465-467
• /
• 1999

The data transmission system in MAGLEV is required a high quality and high speed for a train safety and reliability driving. In the transmission channel between a vehicle and a ground-site, Gaussian noise is negligible, but impulse noise from the chopper controlled propulsoin unit and the Power supplying device is very severe. The transmission channel must be protected from these noise. In this paper, we propose a DSSS (direct-sequence spread spectrum) modulation as a new data transmission technique in the railway and analyze this data transmission characteristics.

• Journal of the Institute of Electronics Engineers of Korea CI
• /
• v.45 no.6
• /
• pp.68-76
• /
• 2008

It is difficult to maintain mutes in the mobile ad hoc network (MANET) due to the high probability of disconnected routes break by frequent change of topology. The links can have the different reliability about data transmission due to these characteristics. Hence a measure which can evaluate this reliability and a algorithm which reflects this are required. In this paper, we propose routing algorithm based on reliability about transmission. First the bayesian inference which infers the hypothesis by past information is considered to obtain the link's transmission reliability. The other is that the link-based reliability estimation model which considers each link's reliability additionally is proposed while the standard uses only Dijkstra's shortest path algorithm. the simulation results using NS-2 show that the performance of proposed algorithm is superior to the standard OLSR in terms of throughput and stability.

• Proceedings of the Korean Society of Marine Engineers Conference
• /
• 2005.06a
• /
• pp.448-453
• /
• 2005

For under-water communication system, due to limit of bandwidth and reflect of under-water wave, it is difficult to implement high-reliability high-speed digital communication system. To apply high-reliability and high-speed communication system for under-water system, the efficient combine the channel design with the use of multiple transmit and/or receive antennas. Therefore this paper analyze the space time coded system for under-water communication environment.

• Proceedings of the KSME Conference
• /
• 2004.04a
• /
• pp.1105-1108
• /
• 2004

As recently optical communication industry is developed, request of optical communication part is increased. Ferrule is very important part which determines transmission efficiency and quality of information in the optical communication part. Most of ferrule processes are grinding which request high processing precision. The ultra precision centerless grinding machine for ferrule grinding was designed. The centerless grinding machine is composed of the high damping bed, grinding wheel spindle unit, regulating wheel spindle unit, feeding table and dressing unit. Reliability prediction was very important for the high quality design. In this study, centerless grinding machine was predicted reliability.

• ETRI Journal
• /
• v.25 no.1
• /
• pp.1-8
• /
• 2003

This paper introduces an efficient iterative decoding method for high-dimensional block turbo codes. To improve the decoding performance, we modified the soft decision Viterbi decoding algorithm, which is a trellis-based method. The iteration number can be significantly reduced in the soft output decoding process by applying multiple usage of extrinsic reliability information from all available axes and appropriately normalizing them. Our simulation results reveal that the proposed decoding process needs only about 30% of the iterations required to obtain the same performance with the conventional method at a bit error rate range of $10^{-5}\;to\;10^{-6}$.

• Applied Microscopy
• /
• v.45 no.2
• /
• pp.89-94
• /
• 2015

This article briefly reviews the results of recently reported research on high-temperature Pb-free solder alloys and the research trend for characterization of the interfacial reaction layer. To improve the product reliability of high-temperature Pb-free solder alloys, thorough research is necessary not only to enhance the alloy properties but also to characterize and understand the interfacial reaction occurring during and after the bonding process. Transmission electron microscopy analysis is expected to play an important role in the development of high-temperature solders by providing accurate and reliable data with a high spatial resolution and facilitating understanding of the interfacial reaction at the solder joint.

• Proceedings of the Korea Society of Information Technology Applications Conference
• /
• 2005.11a
• /
• pp.77-80
• /
• 2005

Wireless sensor networks(WSN) technology has various applications such as surveillance and information gathering in the uncontrollable area of human. One of major issues in WSN is the research for reducing the energy consumption and reliability of data. A system with forward error correction(FEC) can provide an objective reliability while using less transmission power than a system without FEC. In this paper, we propose to use LDPC codes of various code rate(0.53, 0.81, 0.91) for FEC for WSN. Also, we considered node-to-node interference in addition to AWGN channel. The proposed system has not only high reliable data transmission at low SNR, but also reduced transmission power usage.