• Annual Conference of KIPS
• /
• 2009.04a
• /
• pp.1178-1181
• /
• 2009

Geographic forwarding algorithms을 사용하는 Georouting protocol에서는 route maintenance을 위해서 고정된 주기마다 beacon message을 이웃노드에 전송하는 fixed periodical beacon based route algorithm을 사용하여 mobile node 정보를 습득한다. Fixed periodical beacon scheme에서의 기존 연구 이슈는 이웃노드 정보의 신뢰성을 유지하기 위해서 다양한 mobility environment 환경에 맞도록 beacon 전송주기를 적절히 결정하는 연구가 진행되어 왔다. 이와 같은 연구에서는 long periodical interval 사용 시 이웃노드의 위치정보 error을 발생시킬 확률이 높으며 또한 short periodical interval 의 경우 네트워크 내에 high route overhead 을 유발시키는 단점을 가지고 있다. 따라서 고정된 주기 방법은 다양한 mobility environment에 잘 적용되지 못하며 또한 mobility environment 에서 발생하는 route maintenance 내에 이웃노드 정보에 대한 불확실성 문제가 빈번이 발생하여 경로 설정에 잘못된 정보를 제공하여 경로 신뢰성(path reliability)과 낮은 전송률 (transmission rate)을 야기한다. 본 논문에서는 이런 이웃노드 정보의 불확실성 문제를 극복하기 위해서 mobile node가 스스로 자신의 위치를 체크하여 routing table을 능동적으로 갱신하는 방법을 이용하여 이 문제를 극복할 수 있도록 하였다. 모의 실험은 ns2를 이용하여 실시하였으며 결과는 low/high mobility scenario에서는 기존 방법 보다 routing overhead 을 줄이면서 높은 전송률 (transmission rate)을 보인다.

• Journal of the Microelectronics and Packaging Society
• /
• v.29 no.2
• /
• pp.113-119
• /
• 2022

In order to improve the mechanical reliability of next-generation electronic devices including flexible, wearable devices, a high level of mechanical reliability is required at various flexible joints. Organic adhesive materials such as epoxy for bonding existing polymer substrates inevitably have an increase in the thickness of the joint and involve problems of thermodynamic damage due to repeated deformation and high temperature hardening. Therefore, it is required to develop a low-temperature bonding process to minimize the thickness of the joint and prevent thermal damage for flexible bonding. This study developed flexible laser transmission welding (f-LTW) that allows bonding of flexible substrates with flexibility, robustness, and low thermal damage. Carbon nanotube (CNT) is thin-film coated on a flexible substrate to reduce the thickness of the joint, and a local melt bonding process on the surface of a polymer substrate by heating a CNT dispersion beam laser has been developed. The laser process conditions were constructed to minimize the thermal damage of the substrate and the mechanism of forming a CNT junction with the polymer substrate. In addition, lap shear adhesion test, peel test, and repeated bending experiment were conducted to evaluate the strength and flexibility of the flexible bonding joint.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.18 no.11
• /
• pp.1254-1261
• /
• 2007

Mc-OFDM(Multi code-Orthogonal Frequency Division Multiplexing) modulation has been developed for high-speed data transmission over wireless channels. However, this system suffers critical problem from relatively high PAPR(Peak to Average Power Ratio). To reduce PAPR, we suggest a new technique, called Mapping using (N+1)PSK and demonstrate the performance of mapped Mc-OFDM system. On the other side, in OFDM system, each sub-carrier experiences different fading, thus some sub-carriers may be completely lost because of deep fade. To solve a above mention problem, we propose cooperative communications that improve the reliability of sub-carriers through spatial diversity.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2004.11a
• /
• pp.13-18
• /
• 2004

전력계통 분야에서는 HVDC 전력변환소, BTB, UPFC 및 SVC의 안정성 향상 및 안정적인 운용을 위한 체계적인 유지보수 및 관리가 필요하다. 특히 전력계통에 접속된 대용량 전력반도체 소자인 사이리스터 밸브는 운전중에 열적, 전기적인 스트레스를 받게 되며, 이로 인해 밸브의 수명이 감소하여 전력계통의 안정적인 운용을 어렵게 만드는 요인이 된다. 따라서 전력계통 운용의 안정성을 확보하기 위해서는 대용량 사이리스터 밸브의 열적, 전기적 스트레스에 따른 수명 변화를 예측하는 열화진단 기법의 개발이 중요하다. 본 고에서는 대용량 사이리스터 소자의 열화진단 기법에 대한 국내외 현황과 현재 연구가 진행중인 열화 진단 기법에 대해 서술하였으며, 1500V급 사이리스터 소자의 가속열화 실험을 통해 소자의 수명을 예측한 결과를 나타내었다.

• 한국전산유체공학회:학술대회논문집
• /
• 2011.05a
• /
• pp.236-239
• /
• 2011

This paper introduces the design concepts and characteristics of WinDS3000$^{TM}$(TC IIa) which is a trade name of Doosan's 3MW offshore/onshore wind turbine. WinDS3000$^{TM}$(TC IIa) has been designed in consideration of high Reliability, Availability, Maintainability and Serviceability (RAMS) and low cost of electricity (CDE) for the TC IIa condition based on GL guideline. An integrated drive-train design with an innovative three-stage gearbox has been introduced to minimize nacelle weight of the wind turbine and to enhance a high reliability for transmission. A permanent magnet generator with full converter system has been introduced to get higher efficiency in partial load operation and grid-friendly system for both 50 Hz and 60 Hz. A pitch-regulated variable speed control system has been introduced to control wind turbine power while generator reaction torque can be adjusted almost instantaneously by the associated power electronics. The wind turbine has been also equipped with condition monitoring and diagnostic systems in order to meet maintainability requirements.

• KSII Transactions on Internet and Information Systems (TIIS)
• /
• v.5 no.8
• /
• pp.1388-1403
• /
• 2011

A vehicular ad-hoc network (VANET) consists of vehicles that form a network without any additional infrastructure, thus allowing the vehicles to communicate with each other. VANETs have unique characteristics, including high node mobility and rapidly changing network topology. Because of these characteristics, routing algorithms based on greedy forwarding such as greedy perimeter stateless routing (GPSR) are known to be very suitable for a VANET. However, greedy forwarding just selects the node nearest to the destination node as a relay node within its transmission range. This increases the possibility of a local maximum and link loss because of the high mobility of vehicles and the road characteristics in urban areas. Therefore, this paper proposes a reliability-improving position-based routing (RIPR) algorithm to solve those problems. The RIPR algorithm predicts the positions, velocities, and moving directions of vehicles after receiving beacon messages, and estimates information about road characteristics to select the relay node. Thus, it can reduce the possibility of getting a local maximum and link breakage. Simulation results using ns-2 revealed that the proposed routing protocol performs much better than the existing routing protocols based on greedy forwarding.

• ETRI Journal
• /
• v.37 no.3
• /
• pp.480-490
• /
• 2015

The reliability of sensor networks is generally dependent on the battery power of the sensor nodes that it employs; hence it is crucial for the sensor nodes to efficiently use their battery resources. This research paper presents a method to increase the reliability of sensor nodes by constructing a connected dominating tree (CDT), which is a subnetwork of wireless sensor networks. It detects the minimum number of dominatees, dominators, forwarder sensor nodes, and aggregates, as well as transmitting data to the sink. A new medium access control (MAC) protocol, called Homogenous Quorum-Based Medium Access Control (HQMAC), is also introduced, which is an adaptive, homogenous, asynchronous quorum-based MAC protocol. In this protocol, certain sensor nodes belonging to a network will be allowed to tune their wake-up and sleep intervals, based on their own traffic load. A new quorum system, named BiQuorum, is used by HQMAC to provide a low duty cycle, low network sensibility, and a high number of rendezvous points when compared with other quorum systems such as grid and dygrid. Both the theoretical results and the simulation results proved that the proposed HQMAC (when applied to a CDT) facilitates low transmission latency, high delivery ratio, and low energy consumption, thus extending the lifetime of the network it serves.

• Proceedings of the KIEE Conference
• /
• 2005.07a
• /
• pp.697-699
• /
• 2005

High temperature superconducting (HTS) cable could be regarded as one of the most promising technologies for large electric power delivery with high reliability and low losses of power transmission system. Therefore, since 2001, LS Cable Ltd. has been developing 22.9kV, 50MVA HTS cable system as a member of DAPAS (Dream for Advanced rower system by Applied Superconductivity technology) program. In 2003, 22.9kV HTS cable system, single-core cable employing BSCCO HTS wires was firstly manufactured in 2003, and then three-core cable was also successfully developed through the demonstration of its field applicability. In this paper, based on these experiences, the relevant design technology and transient characteristics of HTS cable is described.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.18 no.5
• /
• pp.1215-1223
• /
• 2014

In multi-hop wireless networks, a message transmission path is set up on demand by a route discovery step, where a shortest path is used in general. The shortest path, however, normally uses the nodes near the center area, which causes a high traffic load in that area and reduces the message transmission reliability. We propose a stable routing protocol considering the remaining energy of nodes. Our protocol uses ETX as a link performance estimator and tries to avoid the nodes with smaller energy. By doing this, we can reduce the route failure probability and packet loss. We have evaluated the performance of the proposed protocol using QualNet and compared with AODV and MRFR protocols. The simulation result shows that our protocol has a similar performance as MRFR in terms of end-to-end message reception ratio, average message delay and delay jitter, but outperforms MRFR in terms of traffic load distribution.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.12 no.7
• /
• pp.3176-3183
• /
• 2011

Traffic and congestion control in the wireless sensor network is an important parameter that decides the throughput and QoS (Quality of Service). This paper proposes a transmission rate priority-based traffic control scheme to serve digital contents streaming in wireless sensor networks. In this paper, priority for transmission rate decides on the real-time traffic and non-real-time with burst time and length. This transmission rate-based priority creates low latency and high reliability so that traffic can be efficiently controlled when needed. Traffic control in this paper performs the service differentiation via traffic detection process, traffic notification process and traffic adjustment. The simulation results show that the proposed scheme achieves improved performance in delay rate, packet loss rate and throughput compared with those of other existing CCF and WCA.