• 한국광학회:학술대회논문집
• /
• 한국광학회 2001년도 제12회 정기총회 및 01년도 동계학술발표회
• /
• pp.6-11
• /
• 2001

More than ten kinds of oxide thin films and their heterostructure have been successfully fabricated on SrTiO$_3$(001) substrates by laser molecular beam epitaxy (laser MBE). Measurements of atomic force microscopy (AFM), high-resolution transmission electron microscopy (HRTEM) and X-ray small-angle reflectivity reveal that the surfaces and interfaces are atom-level-smooth. The unit cell layers and the lattice structure are perfect. The electrical and optical properties of BaTiO$_3$-x thin films and BaTiO$_3$/SrTiO$_3$ (BTO/STO) superlattices were examined. The all-perovskite oxide P-N junctions have been successfully fabricated and the better I-V curves were observed.

• 지구물리와물리탐사
• /
• 제3권1호
• /
• pp.7-12
• /
• 2000

본 논문은 3차원 탄성파자료로부터 저류층의 공극율 분포를 파악하기 위한 자료 전처리 및 역산법에 대한 연구이다. 전처리과정은 음파 및 밀도 검층기록에서 도출한 반사계수 시계열을 사용하여 탄성파기록의 진폭을 보정하는 공정이다. 연구지역에서 획득한 8개의 검층기록과 그 위치의 탄성파 기록으로부터 산출된 보정함수를 크리깅(kriging)하여 모든 탄성파기록의 보정함수를 산출하였다. 일정 대역폭을 보유한 탄성파기록으로부터 검층과 같은 광대역 임피던스 시계열을 도출하기 위해서는 한정된 대역폭의 탄성파 기록에서 손실된 저주파와 고주파 성분을 복구하여야 한다. 본 연구에서는 autoregressive(AR) 방법을 사용하였다.

• Transactions on Electrical and Electronic Materials
• /
• 제13권1호
• /
• pp.16-18
• /
• 2012

LED lighting systems that combine lighting capability, emotional and physiological characteristics are required for lighting source and multifunctional applications. In this work, Simulation studies using optical analysis software packages, Light Tools, are presented. This is done to estimate the uniformity ratio of illuminance and photosynthetic photon flux density (PPFD) of the periodic 2D lattice arrangements, such as square, diamond, two-way bias quadrangular, hexagonal, and Kagome lattices, under the same transmissivity, absorptance and reflectivity. It has been found out that the two-dimensional Kagome lattice arrangement exhibited high uniformity ratio of illuminance and PPFD compared to other lattices. Accordingly, these results can be used to guide a design and improve the lighting environment which in turn would maximize the uniform distributions of illuminance.

• 대한원격탐사학회지
• /
• 제7권2호
• /
• pp.131-147
• /
• 1991

Feature enhancement combined with some pattern recognition techiques were applied to the Remote Sensing Data for geological mapping with particular emphasis on non-me-tallic ore deposits and their related geologies. The area chosen is north of Ulsan, the size of which is about 400km$^2$. The geology of the area consists mainly of volcanics, volcanic sediments and clastic sediments of Miocene age, underlain by the Kyungsang sediments of Cretaceous age. The mineralization occurs in tuffs or along the bedding plane of tuffaceous sediments, the main products of which are Kaolinite and Bentonite. The outcrops or mine dumps in the study area were most effectively extracted on the histrogram normalized image of TM Band 1 and 2, due to their high reflectivity. These may be confused with some artificial features, like slate roof complex of the poultry farm or cement ground, which should be classified by field checking. Detailed examination of enhancment image combined with pattern recognition techniques made enable to classify different rocks and thereby extract volcanic products which are mainly related to non-metallic ore deposits in the study area.

• 대한원격탐사학회지
• /
• 제8권2호
• /
• pp.105-123
• /
• 1992

A study was made on the feature extraction for non-metallic one deposits and their related geology using the Remote Sensing and Airborne Radiometric data. The area chosen is around the Haenam area, where dickite and Quarzite mines are distributed in. The geology of the area consists mainly of Cretaceous volcanics and PreCambrian metamorphic. The methods applied are study on the reflectance characteristics of minerals and rocks sampled in the study area, and the feature extraction extraction of histogram normalized images for Landsat TM and Airborne Radiometric data, and finally evaluation of applicability of some useful pattern recognition techniques for regional lithological mapping. As a result, reflectances of non-metallic minerals are much higher than rock samples in the area. However, low grade dickites are slightly higher than rock samples, probably due to their greyish colour and also their textural features which may scatter the reflectance and may be capable of capturing much hychoryl ions. The reflectances of rock samples may depend on the degree of whiteness of samples. The outcrops or mine dumps in the study area were most effectively extracted on the histogram normalized image of TM Band 1, 2 and 3, due to their high reflectivity. The Masking technique using the above bands may be the most effective and the natural colour composite may provide some success as well. The colour composite image of PCA may also be effective in extracting geological features, and airborne radiometric data may be useful to some degree as an complementary tool.

• Design & Manufacturing
• /
• 제13권1호
• /
• pp.19-24
• /
• 2019

Currently, the world is paying keen attention to the production of renewable energy along with environmental issues, and the share of renewable energy in the world is rising above that of nuclear power. Especially when Korea, which is heavily dependent on foreign countries, needs to reconsider its national competitiveness due to the recent high oil prices, the government's energy policy is to develop and use renewable energy that replaces fossil fuels. In particular, solar energy, the most actively studied and commercialized field of renewable energy, is the main research for solar energy and is commercialized and used. However, the efficiency of solar energy has already reached saturation. Studies are also focusing on increasing the reflectivity of solar energy to increase efficiency. Therefore, this paper proposes a solar collection system that can utilize solar energy rather than solar energy. The proposed solar heat collection system uses solar tracking systems to effectively collect solar energy, particularly those that can be easily produced using single-modular reflectors and have price competitiveness. In addition, temperature measurement experiments with temperature measuring sensors were conducted to ensure reliability in order to verify the results interpreted.

• 한국재료학회지
• /
• 제29권9호
• /
• pp.547-552
• /
• 2019

In the present study, the thermal conductivity of a silicon nitride($Si_3N_4$) thin-film is evaluated using the dual-wavelength pump-probe technique. A 100-nm thick $Si_3N_4$ film is deposited on a silicon (100) wafer using the radio frequency plasma enhanced chemical vapor deposition technique and film structural characteristics are observed using the X-ray reflectivity technique. The film's thermal conductivity is measured using a pump-probe setup powered by a femtosecond laser system of which pump-beam wavelength is frequency-doubled using a beta barium borate crystal. A multilayer transient heat conduction equation is numerically solved to quantify the film property. A finite difference method based on the Crank-Nicolson scheme is employed for the computation so that the experimental data can be curve-fitted. Results show that the thermal conductivity value of the film is lower than that of its bulk status by an order of magnitude. This investigation offers an effective way to evaluate thermophysical properties of nanoscale ceramic and dielectric materials with high temporal and spatial resolutions.

• Current Optics and Photonics
• /
• 제7권1호
• /
• pp.47-53
• /
• 2023

We propose a centralized passive-optical-network monitoring scheme using the resonance-spectrum properties of a Fabry-Perot cavity based on fiber Bragg gratings. Each cavity consists of two identical uniform fiber Bragg gratings and a varying cavity length or grating length, which can produce a unique single-mode resonance spectrum for the drop-fiber link. The output spectral properties of each cavity can be easily adjusted by the cavity length or the grating length. The resonance spectrum for each cavity is calculated by the transfer-matrix method. To obtain the peak wavelength of the resonance spectrum more accurately, the effective cavity length is introduced. Each drop fiber with a specific resonance spectrum distinguishes between the peak wavelength or linewidth. We also investigate parameters such as reflectivity and bandwidth, which determine the basic performance of the fiber Bragg grating used, and thus the output-spectrum properties of the Fabry-Perot cavity. The feasibility of the proposed scheme is verified using the Optisystem software for a simplified 1 × 8 passive optical network. The proposed scheme provides a simple, effective solution for passive-optical-network monitoring, especially for a high-density network with small end-user distance difference.

• 한국수자원학회:학술대회논문집
• /
• 한국수자원학회 2020년도 학술발표회
• /
• pp.183-183
• /
• 2020

Accurate quantitative precipitation estimation plays an important role in hydrological modelling and prediction. Instantaneous quantitative precipitation estimation (QPE) by utilizing the weather radar data is a great applicability for operational hydrology in a catchment. Previously, regression technique performed between reflectivity (Z) and rain intensity (R) is used commonly to obtain radar QPEs. A novel, recent approaching method which might be applied in hydrological area for QPE is Long Short-Term Memory (LSTM) Networks. LSTM networks is a development and evolution of Recurrent Neuron Networks (RNNs) method that overcomes the limited memory capacity of RNNs and allows learning of long-term input-output dependencies. The advantages of LSTM compare to RNN technique is proven by previous works. In this study, LSTM networks is used to estimate the quantitative precipitation from weather radar for an urban catchment in South Korea. Radar information and rain-gauge data are used to evaluate and verify the estimation. The estimation results figure out that LSTM approaching method shows the accuracy and outperformance compared to Z-R relationship method. This study gives us the high potential of LSTM and its applications in urban hydrology.

• 한국지구과학회지
• /
• 제33권7호
• /
• pp.596-607
• /
• 2012

R-Z 관계식은 레이더 강우추정의 정확도를 결정하는 중요한 요소이다. 본 연구에서는 캐나다 궤벡주의 셍레미에서 홍수를 야기한 폭우사례에서 관측된 우적계 및 레이더 자료를 이용하여 레이더 강우추정 시 우적계 자료에서 도출된 R-Z 관계식의 효과를 분석하였다. 이를 위하여 맥길 S-밴드 레이더에서 시간 분해능 2.5분과 공간 분해능 $1^{\circ}{\times}250m$로 관측된 레이더 반사도를 사용하였다. 레이더 반사도 자료에서는 폭우를 동반한 강우세포가 셍레미를 통과한 것으로 관측되었지만 우량계 관측망에서는 낮은 공간 분해능으로 인하여 이 세포가 관측되지 않았다. 셍레미에서 30분과 1시간 최대 누적 강우량은 각각 39 mm와 42 mm였다. 강우사례 동안 두 개의 우적계(POSS; Precipitation Occurrence Sensor System)가 사용되었다. 하나의 우적계는 레이더 반사도와 우적계 반사도를 비교하여 레이더 반사도를 보정하고 다른 우적계는 R-Z 관계식을 유도하는데 사용되었다. 기후학적 R-Z 관계식을 사용하였을 때 보다 반사도에 의존적인 우적계에서 유도된 관계식을 사용하였을 때 강우 추정 오차가 크게 줄었다. 일 누적 강우량에 대하여 편차는 +12%에서 -2%, 평균제곱근오차가 16%에서 10%로 줄었다. 우적계에서 도출된 R-Z 관계식으로 추정된 레이더 강우장을 이용하였을 때 홍수사례에 대하여 강우 발생 시간 및 강우량이 잘 일치하였다.