• The Transactions of the Korea Information Processing Society
• /
• v.1 no.4
• /
• pp.490-501
• /
• 1994

In this study the problems of cell marking method used in the field of ATM network traffic control are presented. Also an extended cell marking method considering the user level priority is proposed. The conventional traffic monitoring schemes set the CLP bit of a cell to 1 only under the circumstance of the violation of traffic contract. It causes that the number of low level cells increases and the levels of cells are lowered regardless of the user level priority. The three level priority control method combining FCI bit with CLP bit has also been proposed. It divides CLP=0 cells into two levels. Consequently, the proposed method preserves more cells in high level than the conventional one and the real loss of high level cells can be reduced. The performance of the proposed scheme has also been analyzed by the PBS(partial buffer sharing) with two thresholds for the proposed three levels. The result shows that the PBS with two thresholds can give more efficient control than the scheme with no priority, or the PBS with one threshold.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2009.10a
• /
• pp.755-757
• /
• 2009

Since the research of advanced terrestrial digital multimedia broadcasting system is still in progress, and in our previous paper, in which we introduced how to combine one conventional transmitted symbol with two additional bits to form a new symbol transmission, the bit error performance of LP bits is not realizable, because even we implemented the turbo code to protect the LP bits transmission, to obtain a certain good bit error probability, the value of $E_b/N_0$ cost highly. In this paper, we modified the composition of low-priority symbol and high-priority symbol, and through the system presented in previous paper we get a better simulation result of the LP symbol transmission.

• The Transactions of the Korean Institute of Electrical Engineers D
• /
• v.55 no.1
• /
• pp.24-30
• /
• 2006

The Controller Area Network (CAN) is being widely used for real-time control application and small-scale distributed computer controller systems. When the stuff bits are generated by bit-stuffing mechanism in the CAN network, it causes jitter including variations in response time and delay In order to eliminate this jitter, stuff bits must be controlled to minimize the response time and to reduce the variation of data transmission time. This paper proposes the method to reduce the stuff bits by restriction of available identifier and bit mask using exclusive OR operation. This da manipulation method are pretty useful to the real-time control strategy with respect to performance. However, the CAN may exhibit unfair behavior under heavy traffic conditions. When there are both high and low priority messages ready for transmission, the proposed precedence priority filtering method allows one low priority message to be exchanged between any two adjacent higher priority messages. In this way, the length of each transmission delays is upper bounded. These procedures are implemented as local controllers for the ISHURO(Inha Semvung Humanoid Robot).

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.39C no.5
• /
• pp.447-455
• /
• 2014

In this paper, we consider a representative integral imaging method in glasses-free 3D image processing and propose a prioritized transmission scheme for guaranteeing a received video quality in error-prone environments. According to the correlation of pixels consisting of each voxel of integral image, we set the priority differently and apply the modulation level according to this priority value. That is to say, the corresponding pixels with small variance are set to a high priority and transmitted by using a low level modulation that is robust under transmission errors, but the corresponding pixels with greater variance are set to a lower priority and transmitted by using a high level modulation that has a high bit error rate but fast transmission rate. Result shows that the proposed scheme that applies the error-robust modulation level to the important image bit stream with the high priority improves the peak to sidelobe ratio (PSR) of the received 3D image, compared with a typical method that use the same modulation level without distinction of priorities.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.24 no.7B
• /
• pp.1296-1304
• /
• 1999

In this paper, we propose an enhanced usage parameter control algorithm, which is one of the preventive traffic control method in ATM networks. Proposed algorithm is based on the cell loss priority bit in the ATM cell header. This algorithm can eliminate the measurement phasing problem in cell conformance testing in ATM networks. Proposed algorithm can minimize the cell loss ratio of high priority cell(CLP = 0) and resolve the burstiness of cells which may be introduced in traffic multiplexing and demultiplexing procedure. For the performance evaluation, we simulate the proposed algorithm with discrete time input traffic model, the results show that the performance of proposed algorithm is better than that of ITU-T usage parameter control algorithm.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.37A no.9
• /
• pp.728-737
• /
• 2012

An analytical method for identifying terrestrial broadcasting coverages is proposed for a terrestrial broadcasting transmission system adopting a hierarchical modulation technique. Bit Error Rates(BERs) are derived for hierarchically modulated non-uniform QAM constellations based on the Q-function analysis in AWGN environments. The derived BERs depend on the hierarchical modulation factor ${\alpha}$(HMF) and could be mapped to the broadcasting coverages according to the link budget analysis based on the log-distance path loss model. Finally the broadcasting coverage ratios for high priority(HP) streams and low priority(LP) streams are calculated and presented for the determination of the HMF.

• 제어로봇시스템학회:학술대회논문집
• /
• 1991.10a
• /
• pp.292-298
• /
• 1991

A new 6-axis robot controller with a high-speed 32-bit floating-point DSP TMS32OC30 has been developed in Samsung Electronics. The controller composed of Intel 80386 microprocessor for the main controller, and TKS32OC30 DSP chip for joint position controller. The characteristics of the controller are high sampling rate of 200us and fast reponsibility. The main controller supports MS-DOS, kinematics, trajectory planning, and sensor fusion functions which are vision, PLC, and MAP. The one high speed DSP chip is used for controlling 6 axes of a robot in 200us simultaneously. The control law applied is PID controller including a velocity feedforvard in joint position controller. The performance tests, such as command following, CP, were conducted for the controller integrated with a 6 axes robot developed in Samsung Electronics. The results showed a good performance. This controller can also perform the system control with other controllers, the communication with high priority controllers, and visual information processing.

• Proceedings of the Korean Information Science Society Conference
• /
• 2000.10c
• /
• pp.210-212
• /
• 2000

In this paper, we propose an enhanced usage parameter control algorithm, which is one of the preventive traffic control method in ATM networks and implemented it with VLSI Proposed algorithm is based on the cell loss priority bit in the ATM cell header. This algorithm can solve the measurement phasing problem in cell conformance testing in ATM networks. Proposed algorithm can minimize the cell loss ratio of high priority cell(CLP=0) and resolve the burstiness of cells which may be introduced in traffic multiplexing and demultiplexing procedure. The result of performance evaluation shows that the performance of proposed algorithm is better than that of ITU-T usage parameter control algorithm.

• Proceedings of the IEEK Conference
• /
• 2000.11b
• /
• pp.196-199
• /
• 2000

In this paper has studied an enhanced usage parameter control algorithm, which is one of the preventive traffic control method in ATM networks. The proposed algorithm is based on the CLP(Cell Loss Priority) bit in the ATM cell header. This algorithm can eliminate the measurement phasing problem in cell conformance testing in ATM networks. The proposed algorithm can minimize the cell loss ratio of high priority cell(CLP = 0) and resolve the burstiness of eel]s which may be generated in the multiplexing and demultiplexing procedure. For the performance evaluation, we have simulated the proposed algorithm with discrete time input traffic model and the results show that the performance of the proposed algorithm is better than that of ITU-T usage parameter control algorithm.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.33 no.6A
• /
• pp.607-613
• /
• 2008

In this paper, we investigate the performance of SMP-assisted 3GPP GERAN evolution system employing high order modulation and turbo coding. When applying the SMP which maps systematic bits into highly reliable bit positions, it is confirmed that there is the performance gain for the modulation and coding schemes of 16QAM(DAS-8) as well as 32QAM(DAS-11) by link level simulation.