• Preventive Nutrition and Food Science
• /
• v.22 no.2
• /
• pp.131-137
• /
• 2017

Maximum production of isoquercetin and quercetin simultaneously from rutin by subcritical water hydrolysis (SWH) was optimized using the response surface methodology. Hydrolysis parameters such as temperature, time, and $CO_2$ pressure were selected as independent variables, and isoquercetin and quercetin yields were selected as dependent variables. The regression models of the yield of isoquercetin and quercetin were valid due to the high F-value and low P-value. Furthermore, the high regression coefficient indicated that the polynomial model equation provides a good approximation of experimental results. In maximum production of isoquercetin from rutin, the hydrolysis temperature was the major factor, and the temperature or time can be lower if the $CO_2$ pressure was increased high enough, thereby preventing the degradation of isoquercetin into quercetin. The yield of quercetin was considerably influenced by temperature instead of time and $CO_2$ pressure. The optimal condition for maximum production of isoquercetin and quercetin simultaneously was temperature of $171.4^{\circ}C$, time of 10.0 min, and $CO_2$ pressure of 11.0 MPa, where the predicted maximum yields of isoquercetin and quercetin were 13.7% and 53.3%, respectively. Hydrolysis temperature, time, and $CO_2$ pressure for maximum production of isoquercetin were lower than those of quercetin. Thermal degradation products such as protocatechuic acid and 2,5-dihydroxyacetophenone were observed due to pyrolysis at high temperature. It was concluded that rutin can be easily converted into isoquercetin and quercetin by SWH under $CO_2$ pressure, and this result can be applied for SWH of rutin-rich foodstuffs.

• Mass Spectrometry Letters
• /
• v.10 no.4
• /
• pp.108-111
• /
• 2019

The hydrolysis of penicillin G, carbenicillin and ampicillin in pure water at room temperature was studied by high pressure liquid chromatography electrospray ionization mass spectrometry. Hydrolysis of ampicillin did not occur under these conditions; however, penicillin G and carbenicillin were completely hydrolyzed after seven days. A short interpretation of this difference is proposed. The mass spectrometric behaviour, namely ESI response and fragmentation pathway, of hydrolyzed penicillin G and hydrolyzed carbenicillin have been also discussed.

• Journal of Ginseng Research
• /
• v.17 no.1
• /
• pp.35-38
• /
• 1993

A new and rapid method for the hydrolysis of ginsenosides to panaxadiol or panaxatriol was developed. It is based on the microwave oven reaction, which is high temperature and high-pressure reaction. The optimal hydrolysis time using 5% $H_2SO_4$ solution was found at 10 min PTFE reaction vessel in microwave oven, which is more than 30 times faster than the conventional hydrolysis method.

• Food Science of Animal Resources
• /
• v.33 no.4
• /
• pp.474-480
• /
• 2013

This study was performed to investigate the effects of high pressure/high temperature (HPHT) treatment on the recovery efficiency and characteristics of porcine placenta hydrolysates. The placenta hydrolysates were characterized by solubility, free amino acid contents, gel electrophoresis, gel permeation chromatography (GPC) and amino acid composition. Placenta was treated at 37.5 MPa of pressure combined with various temperatures (150, 170, and $200^{\circ}C$) or various holding times (0, 30, and 60 min at $170^{\circ}C$). Insoluble raw placenta collagen was partially solubilized (> 60% solubility) by the HPHT treatment. Free amino group content of placenta collagen was increased from 0.1 mM/g collagen to > 0.3 mM/g collagen after HPHT treatment, reflecting partial hydrolysis of collagen. The molecular weight ($M_w$) distribution showed evidence of collagen hydrolysis by shifting of $M_w$ peaks toward low molecular weight when treated temperature or holding time was increased. Alanine (Ala), glycine (Gly), hydroxyproline (Hyp), and proline (Pro) contents increased after the HPHT treatments compared to a decrease in the others. In particular, the increase in Gly was obvious, followed by Hyp and Pro, reflecting that placenta hydrolysates were mainly composed of these amino acids. However, increasing temperature or holding time hardly affected the amino acid compositions. These results indicate that the HPHT treatment is advantageous to hydrolyze collagen derived from animal by-products.

• Food Engineering Progress
• /
• v.13 no.2
• /
• pp.85-91
• /
• 2009

High hydrostatic pressure and enzymatic hydrolysis (HPEH) was applied to anchovy in order to produce a natural seasoning ingredient. Total soluble solid, amino nitrogen, total nitrogen and the degree of hydrolysis of anchovy hydrolysates were investigated depending on the process parameters such as temperature, pressure, enzyme concentration and enzyme type. The optimal condition for anchovy hydrolysis was confirmed as temperature 50$^{\circ}C$, reaction time 24 hrs, pressure 50 MPa and enzyme concentration 0.6% in HPEH treatment. HPEH treatment showed more effective in overall properties of anchovy hydrolysis than those of control. All anchovy hydrolysates produced by HPEH treatment were increased more 1.5-2.6 times of total free amino acid than that of control. From these results, the HPEH treatment appears to be an effective and economic process to produce a natural seasoning ingredients.

• KSBB Journal
• /
• v.29 no.3
• /
• pp.193-198
• /
• 2014

Pretreatment of wastepaper using aqueous glycerol under high pressure was studied to enhance the enzymatic hydrolysis. The pretreatment was conducted over a wide range of conditions including temperatures of $150{\sim}170^{\circ}C$, sulfuric acid concentrations of 0.5~1.5%, and reaction times of 30~90 minutes. After the effect of glycerol concentration on the pretreatment performance was investigated, 70% glycerol was selected. As glycerol concentration was increased, higher digestibility was achieved due to higher lignin removal. The optimum condition was found to be around $160^{\circ}C$, 1%, and 60 minutes. At this condition, 60% and 35% of hemicellulose and lignin, respectively, were removed, while only 5% of cellulose was lost. The enzymatic digestibility was 76%, meaning that 73% of the glucan present in the initial substrate was recovered as glucose after enzymatic hydrolysis. Also, it was found that the temperature and acid concentration than the reaction time were more strongly related to the compositional removals and enzymatic digestibility.

• Journal of Korea Technical Association of The Pulp and Paper Industry
• /
• v.29 no.4
• /
• pp.18-27
• /
• 1997

This study was performed to obtained the optimal delignified condition of exploded wood on the acid hydrolysis with sulfuric acid. Wood chips of pine wood(Pinus desiflora), oak wood(Quercus serrata) and birch wood (Betula platyphylla var. japonica) were treated with a high pressure steam (20-30kgf/$\textrm{cm}^2$, 2-6 minutes). The exploded wood was delignified with sodium hydroxide and sodium chlorite, and then hydrolyzed with sulfuric acid. The result can be summerized as follows ; In the exploded wood treated with sodium hydroxide, the optimal concentration of sodium hydroxide was 1% as content of lignin in the exploded wood. Lignin content of exploded wood treated with sodium chlorite was lower then that sodium hydroxide. The maximum reducing sugar yield of exploded wood treated with 1% sodium hydroxide was lower than non-treated exploded wood. In the case of sodium chlorite treated, the maximum reducing sugar yield was hgher than non-treated exploded wood. Sugar composition of acid hydrolysis solution was composed of xylose and glucose residue, and the rate of glucose residue was increased in high pressure condition.

• Applied Chemistry for Engineering
• /
• v.16 no.4
• /
• pp.519-526
• /
• 2005

Hydrolysis of soda-lime waste glass was investigated to test the feasibility for use of waste glass as feed material in the production of foamed glass. The soda-lime glass, such as plate glass and various bottle glasses, was effectively hydrolyzed by steam and water under high pressure. The proper condition for the hydrolysis was found to be reaction temperature of $250^{\circ}C$ and reaction time of 2 h. Under this condition, the water content of hydrated glass through hydrolysis was 7.85~10.04%, allowing successful foaming process for production of foamed glass. Using Na as the modifying agent of glass was effective in the hydrolysis by water. The highest water content of hydrated glass was obtained when weight ratio of NaOH to the glass was 0.04.

• Journal of environmental and Sanitary engineering
• /
• v.13 no.3
• /
• pp.141-147
• /
• 1998

Under high temperature and high pressure, cyanogen disinter gration distruction mechanism brought followings results through continuous plug flow reactor system. 1. The temperature was a important reacting factor in cyanogen disintegration. Over $612.8^{\cird}K$ high disintegration rate or 99.99% was shown even under $2000{\;}mg/{\ell}$ cyanogen density. 2. The conditions of cyanogen disintegration was gained through experimenting the supercrietical condition of water in basic. To gain 99.99% disintegration rate under $1000{\;}mg/{\ell}$ early cyanogen density, the pressure showed 52.8 seconds at $523^{\cird}K$ and 84.2 atm and gained $0.56{\;}mg/{\ell}$ operating density. 3. Here is the reaction velocity formula of cyanogen disintegration by hydrolysis: This formula indicates the high possibility of cyanogen disintegration within a short time. And it also implys the potential possibility on treating NBDICOD and the technology in developing the environment cleaning progress as small size automatic controlling equipment.

• Applied Biological Chemistry
• /
• v.40 no.1
• /
• pp.76-79
• /
• 1997

Several physicochemical properties such as water solubility, vapor pressure, hydrolysis and octanol/water partition coefficient(Kow) of flupyrazofos, the first organophosphorus insecticide developed in Korea, were measured based on EPA and OECD methods. Water solubility was low showing 0.80 ppm at $25^{\circ}C$ and in hydrolysis study, half-life at $25^{\circ}C$ was 266.5 hr(pH 4.0), 180.0 hr(pH 7.0) and 120.9 hr(pH 9.0) demonstrating instability in alkaline solution. At $40^{\circ}C$ hydrolysis rate was $2{\sim}4$ times higher than that at $25^{\circ}C$. The equation log P=0.673-(1565.4/T) was obtained from vapor pressure experiments at three different temperatures (25, 35, $45^{\circ}C$) and $2.81{\times}10^{-5}$ torr was obtained at $25^{\circ}C$. This value is similar to that of diazinon and 1,000 times lower than that of DDVP suggesting it would not give environmental contamination by volatilization. High log Kow(5.24) was observed and this might result in bioconcentration through food chain. However, its possibility is not likely to be high due to its relatively rapid hydrolysis.